DC-AC INVERTER UNIT PS-M05D12(S) (5 W DUAL OUTPUTS) (STANDARD) DESCRIPTION : This DC/AC Inverter is developed for alternative Backlight Inverter to Endicot E-Serie. The Inverter has PCB mounting pins. The nominal input voltage is 12 Vdc regulated. Please contact us for confirmation regarding compatibility with your display. APPLICABLE LCD: Lamp Voltage 500 Vrms Lamp Current 2 x 5.0 mArms Lamp Start Up Voltage 1.500 Vrms (Vin : 12 Vdc) FEATURES : min. 75% Efficiency Input Voltage, must be regulated Ext. PWM (TTL) Dimming Function 250 Hz RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity L x B x H 32 x 40 x 15 mm 7.62 Bottom View 17.7 8 6.10 7.62 DIMENSIONS : -10°C ~ +60°C -20°C ~ +85°C 95 %RH max 2 PCB mounting pins 0.64 square. Unit : mm Weight :12 (g) typ 1 27.94 39.70 6 32.0 3 15.24 5 4 10.16 5.60 20.23 Pin Terminal: Pin No. 1 2 3 4 5 Symbols Vin GND Vlow Vhigh1 Vhigh2 Ratings 10.8 ~ 13.2 Vdc (GND) 500 Vrm s (5.0 m Arm s ) 500 Vrm s (5.0 m Arm s ) 6 Ext. PWM High Activ (250 Hz) Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (1) Version 1.0.3, 12th February 2010 DC-AC INVERTER UNIT PS-M05D12(S) (5 W DUAL OUTPUTS) (STANDARD) ELECTRICAL CHARACTERISTICS : Parameters Symbols Output Current Output Current Input Current Frequency Open Circuit Voltage Iout Iout Iin F Vopen Note 1 : Note 2: Vin (V) 12±1.2 12±0.6 12±1.2 12±1.2 11.4 Conditions Vrmt Tu (°C) (V) 5±0.25 -10 ~ +60 5±0.25 -10 ~ +60 5±0.25 -10 ~ +60 5±0.25 -10 ~ +60 5±0.25 -10 ~ +60 Specification Min. Typ. Max. 4.0 27 - 5.0 10 0.4 32 1.500 6.0 37 - Unit m Arm s % Adc kHz Vrm s Note Dut y 100 % PW M - Dimming Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked on mechanical drawing and any conductors. The external PWM frequency should be in a range of 100 ~ 500 Hz. For other frequency please request. The optimum is normally at 250 Hz, and minimizes the interference disturbances of the vertical sync. frequency. TEST CIRCUIT : F Vin 10.2 ~ 13.8 V A Iin 1000:1 PROBE F Pin 1 Vopen V ~ Pin 5 V Pin 2 Pin 4 T1 RL2 RL1 CL2 A ~ Iout2 CL1 A ~ Iout1 Pin 6 Ext. PWM* 0/5V Pin 3 *) Only active when Vrmt is 0 Vdc or floating Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (2) Version 1.0.3, 12th February 2010