05118 PSD03 thru PSD24C . . . engineered solutions for the transient environment™ STANDARD TVS COMPONENTS APPLICATIONS ✔ Laptop Computers ✔ Cellular Phones ✔ Digital Cameras ✔ Personal Digital Assistants (PDAs) IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-Gnd) & Level 3(Line-Line) SOD-323 FEATURES ✔ 500 Watts Peak Pulse Power per Line(td= 8/20µs) ✔ Unidirectional & Bidirectional Configurations ✔ Replacement for MLV (0805) ✔ Protects One Power or I/O Port ✔ Available in Multiple Voltages Ranging From 3.0V to 24.0V ✔ ESD Protection > 40 kilovolts ✔ Low Clamping Voltage MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SOD-323 ✔ Weight 10 milligrams (Approximate) ✔ Flammability Rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481-1-A ✔ Device Marking: Marking Code & Polarity Band (Unidirectional Only) CIRCUIT DIAGRAMS 05118.R2 3/02 UNIDIRECTIONAL BIDIRECTIONAL 1 1 2 2 1 www.protekdevices.com PSD03 thru PSD24C DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Peak Pulse Power (td = 8/20µs) - See Figure 1 PPP 500 Watts Operating Temperature TJ -55°C to 150°C °C TSTG -55°C to 150°C °C PARAMETER Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (See Notes 1-2) DEVICE MARKING A G B H C J D K E L F M PSD03 PSD03C PSD05 PSD05C PSD08 PSD08C PSD12 PSD12C PSD15 PSD15C PSD24 PSD24C RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM CLAMPING VOLTAGE (See Fig. 2) VWM VOLTS @ 1mA V(BR) VOLTS @ IP = 1A VC VOLTS 3.3 3.3 5.0 5.0 8.0 8.0 12.0 12.0 15.0 15.0 24.0 24.0 4.0 4.0 6.0 6.0 8.5 8.5 13.3 13.3 16.7 16.7 26.7 26.7 6.5 7.0 9.8 9.8 13.4 13.4 19.0 19.0 24.0 24.0 43.0 43.0 MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE @8/20µs VC @ IPP @VWM ID µA 0V @ 1 MHz C pF 10.9V @ 43.0A 10.9V @ 39.0A 13.5V @ 42.0A 14.5V @ 28.0A 16.9V @ 34.0A 18.5V @ 17.0A 25.9V @ 21.0A 29.5V @ 14.0A 30.0V @ 17.0A 33.0V @ 12.0A 49.0V @ 12.0A 46.2V @ 9.0A 125 125 10 10 10 10 1 1 1 1 1 1 500 200 350 175 250 150 150 50 100 40 88 40 Note 1: Part numbers with an additional “C” suffix are bidirectional devices, i.e., PSD05C. Note 2: For Bidirectional Devices Only: Electrical characteristics apply in both directions. FIGURE 1 PEAK PULSE POWER VS PULSE TIME 120 IPP - Peak Pulse Current - % of IPP PPP - Peak Pulse Current - Watts 10,000 500W, 8/20µs Waveform 1,000 100 10 0.01 05118.R2 3/02 FIGURE 2 PULSE WAVE FORM tf 100 Peak Value IPP 80 e-t TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 60 40 td = t I /2 PP 20 0 1 10 100 td - Pulse Duration - µs 1,000 10,000 2 0 5 10 15 t - Time - µs 20 25 www.protekdevices.com 30 PSD03 thru PSD24C GRAPHS FIGURE 3 POWER DERATING CURVE 100 Peak Pulse Power 8/20µs % Of Rated Power 80 60 40 20 Average Power 0 0 25 50 75 100 125 TL - Lead Temperature - °C 150 FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE FOR PSD05 5 Volts per Division 25 15 5 -5 -15 ESD Test Pulse: 5 kilovolt, 1/30ns (waveform) FIGURE 5 TYPICAL REVERSE VOLTAGE VS CAPACITANCE FOR PSD05 400 C - Capacitance - pF 300 200 100 0 0 05118.R2 3/02 1 2 3 4 VR - Reverse Voltage - Volts 3 5 6 www.protekdevices.com PSD03 thru PSD24C PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SOD-323 PACKAGE C A B E PACKAGE DIMENSIONS DIM D H F MOUNTING PAD A B C D E F H MILLIMETERS MIN MAX INCHES MIN MAX 1.60 1.15 2.39 0.92 0.25 0.10 - 0.063 0.045 0.094 0.036 0.010 0.004 - 1.90 1.45 2.70 1.10 0.40 0.20 0.10 0.075 0.057 0.106 0.043 0.016 0.008 0.004 NOTES: 1. Controlling Dimensions in Millimeters. 2. Dimensions are exclusive of mold flash and metal burrs. 0.118” (3.00mm) 0.031” (0.80mm) 0.031” (0.80mm) 06010 Rev 1 - 11/01 TAPE & REEL PACKAGING: Surface mount product is taped and reeled in accordance with EIA-481, reel quantites and sizes are as follows: 7 Inch Reel - 3,000 pieces per reel; 13 Inch Reel - Not Available ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com COPYRIGHT © ProTek Devices 2001 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05118.R2 3/02 4 www.protekdevices.com