CHONGQING RC810

CHONGQING PINGYANG ELECTRONICS CO.,LTD.
RC8005 THRU RC810
SINGLE-PHASE SILICON BRIDGE RECTIFIER
VOLTAGE:50-1000V
CURRENT:8.0A
FEATURES
C-1
·Surge overload ratings-150 Amperes
·Good for printed circuit board assembly
.165(4.2)
.157(4.0)
MECHANICAL DATA
·Case: Silicon rubber passivated
·Epoxy: UL 94V-0 rate flame retardant
·Lead: MIL-STD- 202E, Method 208 guaranteed
·Polarity: As marked
·Mounting position: Any
·Weight: 1.88 grams
.086(2.20)
.078(2.0)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRONICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz,resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL RC8005 RC801 RC802 RC804 RC806 RC808 RC810 units
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Bridge Input Voltage
Maximum DC Blocking Voltage
Maximum Average Forward rectified Output
Current at TA=50°C
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rate load (JEDEC
method)
Maximum Forward Voltage Drop per element at
8.0A DC
Maximum DC Reverse Current
@ TA=25°C
at Rated DC Blocking Voltage
@ TA=100°C
per element
VRRM
VRMS
VDC
50
35
50
100
70
100
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
1000
V
V
V
Io
8.0
A
IFSM
150
A
VF
1.0
V
IR
5.0
µA
500
2
2
It
10
AS
I2t Rating for Fusing (t﹤8.3ms)
CJ
25
pF
Typical Junction Capacitance (Note 1)
RθJA
40
°C/W
Typical Thermal Resistance (Note 2)
Notes: 1.Measured at 1MHz and applied reverse voltage of 4.0 volts
2.Thermal Resistance from Junction to lead mounted on P.C.B with 0.47×0.47”(12×12mm) copper pads
1
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn