TOSHIBA RN2611

RN2610,RN2611
TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process)
RN2610,RN2611
Switching, Inverter Circuit, Interface Circuit
And Driver Circuit Applications
Unit in mm
l Including twodevices in SM6 (super mini type with 6 leads)
l With built-in bias resistors
l Simplify circuit design
l Reduce a quantity of parts and manufacturing process
l Complementary to RN1610~RN1611
Equivalent Circuit
Maximum Ratings (Ta = 25°C) (Q1, Q2 common)
Characteristic
Symbol
Rating
Unit
Collector-base voltage
VCBO
−50
V
Collector-emitter voltage
VCEO
−50
V
Emitter-base voltage
VEBO
−5
V
IC
−100
mA
P C*
300
mW
Tj
150
°C
Tstg
−55~150
°C
Collector current
Collector power dissipation
Junction temperature
Storage temperature range
JEDEC
EIAJ
TOSHIBA
Weight: 0.015g
―
―
2-3N1A
* Total rating
Equivalent Circuit (Top View)
1
2001-06-05
RN2610,RN2611
Electrical Characteristics (Ta = 25°C) (Q1, Q2 Common)
Symbol
Test
Circuit
Collector cut-off current
ICBO
―
Emitter cut-off current
IEBO
DC current gain
Characteristic
Collector-emitter saturation voltage
Translation frequency
Collector output capacitance
Input resistor
RN2610
RN2611
Test Condition
Min
Typ.
Max
Unit
VCB = −50V, IE = 0
―
―
−100
nA
―
VEB = −5V, IC = 0
―
―
−100
nA
hFE
―
VCE = −5V, IC = −1mA
120
―
400
―
VCE (sat)
―
IC = −5mA, IB = −0.25mA
―
−0.1
−0.3
V
fT
―
VCE = −10V, IC = −5mA
―
200
―
MHz
Cob
―
VCB = −10V, IE = 0, f = 1MHz
―
3
6
pF
R1
―
3.29
4.7
6.11
7
10
13
―
2
kΩ
2001-06-05
RN2610,RN2611
(Q1, Q2 Common)
3
2001-06-05
RN2610,RN2611
(Q1, Q2 Common)
4
2001-06-05
RN2610,RN2611
Type Name
Marking
RN2610
RN2611
5
2001-06-05
RN2610,RN2611
RESTRICTIONS ON PRODUCT USE
000707EAA
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
· The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
· The information contained herein is subject to change without notice.
6
2001-06-05