RY2 Plug-in power relays • General purpose relays • Plug-in version - rail mount TH35, EN 50022 Contacts Contacts Contact number & arrangement Contact material Voltage Max. switching voltage AC/DC Min. switching voltage AC/DC Current Rated load AC1 DC1 Max. switching current Min. inrush current Rated current Max. breaking capacity AC1 Min. breaking capacity Resistance Max. operating frequency • at rated load • no load 2C/O AgCdO 250 V / 250 V 10 V 12 A / 250 V AC 12 A / 30 V DC 20 A 10 mA 12 A 3 000 VA 0,5 W £ 100 mW at 100 mA, 24 V 1 200 cycles/hour 18 000 cycles/hour Coil Coil Voltage Rated voltage on 5...220 V DC 6...230 V AC 50 Hz, 6...240 V AC 50/60 Hz ³ 0,1 Un DC; ³ 0,2 Un AC see Tables 1, 2, 3 0,9 W DC 1,6 VA AC 50 Hz; 1,9 VA AC 50/60 Hz Must release voltage Operating range of supply voltage Rated power consumption Insulation Insulation category Voltage Insulation rated voltage Dielectric strength: • coil-contact • contact-contact • pole-pole Contact-coil distance • clearance • creepage B250 250 V AC 2 500 V AC 1 000 V AC 2 500 V AC ³ 2,6 mm ³ 4 mm General data General data Operating time (typical value) Release time (typical value) Electrical life • resistive • cos j Mechanical life (cycles) Dimensions (L x W x H) Weight Ambient temperature • storing • operating Cover protection category Shock resistance Vibration resistance V 15 ms 10 ms at 12 A 250 V AC ³ 105 see Fig. 2 ³ 107 27,5 x 21,1 x 34,5 mm 35 g -40...+70 °C -40...+55 °C IP 40 10 g 5g for 15...150 Hz 1 2 RY2 Plug-in power relays RY2 3 Plug-in power relays Fig. 1 Electrical life reduction factor at AC inductive load Fig. 2 Reduction factor Electrical life at AC resistive load Power factor Ncosj = N x F Dimensions - cover with mounting flange 7,25 8 10 10 7,25 3,5 4 4,7 5,9 14,2 4 4,7 5,9 14,2 Dimensions - standard version 38 27,5 43 21,2 22 0,5 6,4 6,4 34,5 34,5 3 28,4 0,5 4,8 Connections diagram (pin side view) 12 (1) 42 (2) 14 (3) 44 (4) 11 (5) 41 (6) A1 (7) A2 (8) 4,8 Mounting Relays RY2 are designed for: • screw terminals sockets GZY2 (modules and clips available) - for DIN rail mounting, • fast-on connector. 4 RY2 Plug-in power relays Ordering codes 10 See Tables 1, 2, 3, page 2 6 - connectors / plug-in * - - -- LDLD WT WTL WTD WTLD - no additional features LED indicator arc suppressing diode LED indicator +arc suppressing diode indicating flag + manual testing/latching lever (standard) indicating flag + manual testing/latching lever + LED indicator indicating flag + manual testing/latching lever + arc suppressing diode indicating flag + manual testing/latching lever + LED indicator + arc suppressing diode * D, LD, WTD, WTLD - only for DC coils 2002-12-20