TOSHIBA TC7SP57FU

TC7SP57,58FU
TOSHIBA CMOS Digital Integrated Circuit
Silicon Monolithic
TC7SP57FU,TC7SP58FU
Low Voltage Single Configurable Multiple Function Gate
with 3.6-V Tolerant Inputs and Outputs
The TC7SP57,58 is a high performance CMOS multiple
Function Gate which is guaranteed to operate from 1.2-V to 3.6-V.
Designed for use in 1.5 V, 1.8 V, 2.5 V or 3.3 V systems, it
achieves high speed operation while maintaining the CMOS low
power dissipation.
It is also designed with over voltage tolerant inputs and
outputs up to 3.6 V.
The output state is determined by seven patterns of 3-inputs.
The user can choose the functions of
XNOR(TC7SP57),XOR(TC7SP58), AND, OR, NAND,NOR,
Schmitt Inverter, and Schmitt Buffer.
All inputs are equipped with protection circuits against static
discharge.
TC7SP57FU, TC7SP58FU
Weight: 0.0068 g (typ)
Features
•
Low-voltage operation:
VCC = 1.2 to 3.6 V
•
High-speed operation: tpd = 8.5 ns (max) (VCC = 3.0 to 3.6 V)
tpd = 12.0 ns (max) (VCC = 2.3 to 2.7 V)
•
Output current:
•
Latch-up performance: −300 mA
•
ESD performance:
Machine model > ±200 V
Human body model > ±2000 V
•
Package:
US6
•
Power-down protection is provided on all inputs and outputs
|IOH| / IOL = 8 mA (min) (VCC = 3.0 V)
|IOH| / IOL = 4 mA (min) (VCC = 2.3 V)
|IOH| / IOL = 1.5 mA (min) (VCC = 1.65 V)
1
2008-12-22
TC7SP57,58FU
Pin Assignment (top view)
TC7SP57FU
TC7SP58FU
C
VCC
Y
C
VCC
Y
6
5
4
6
5
4
EPG
EPH
1
2
3
1
2
3
B
GND
A
B
GND
A
Truth Table
OUTPUT
INPUTS
TC7SP57
TC7SP58
A
B
C
Y
Y
L
L
L
H
L
L
L
H
L
H
L
H
L
H
L
L
H
H
H
L
H
L
L
L
H
H
L
H
L
H
H
H
L
L
H
H
H
H
H
L
System Diagram
TC7SP57
A
B
C
3
4
1
Y
6
TC7SP58
A
B
C
3
4
1
Y
6
2
2008-12-22
TC7SP57,58FU
Logic configrations(1/2)
Function
Input
Condition
TC7SP57
Logic symbol
TC7SP58
Logic symbol
Function
Table
SP57
Schmitt AND
or
Schmitt INV
+ NOR
SP58
Schmitt NAND
or
A=H-Level
B
C
B=INPUT
C=INPUT
Y=OUTPUT
B
C
Y
OR
OR
B
C
Y
B
C
Y
Y
Schmitt INV
+ OR
A
B
C
H
L
H
L
Y
57
58
L
L
H
H
L
H
H
H
L
L
H
H
H
H
H
L
A
B
C
L
L
L
H
L
L
L
H
L
H
L
H
L
H
L
L
H
H
H
L
A
B
C
L
H
L
H
H
H
H
h
A
B
C
L
L
L
SP57
Schmitt INV
+NAND
or
Schmitt INV
+OR
SP58
Schmitt INV
+AND
or
B
C
A=L-Level
B=INPUT
C=INPUT
B
C
Y
OR
OR
B
C
Y
B
C
Y
Y
Y=OUTPUT
Y
57
58
Schmitt INV
+ NOR
SP57
Schmitt INV
+NAND
or
Schmitt INV
+ OR
SP58
Schmitt INV
+AND
or
A
C
A= INPUT
B= H-Level
C=INPUT
A
C
Y
OR
A
C
Y
OR
A
C
Y
Y
Y=OUTPUT
Y
57
58
L
H
L
H
H
L
L
L
H
H
H
L
Schmitt INV
+ NOR
SP57
Schmitt INV
+AND
or
Schmitt INV
+NOR
SP58
Schmitt INV
+ NAND
or
A
C
A=INPUT
B=L-Level
C=INPUT
A
C
Y
OR
A
C
Y
OR
A
C
Y
Y
Y=OUTPUT
Y
57
58
L
H
L
L
H
L
H
H
L
L
L
H
H
L
H
L
H
A
B
C
L
L
L
Schmitt INV
+ OR
SP57
Schmitt XNOR
A=B
B=INPUT
C=INPUT
SP58
B
C
B
C
Y
Y=OUTPUT
Schmitt XOR
3
Y
Y
57
58
L
H
L
L
H
L
H
H
H
L
L
H
H
H
H
H
L
2008-12-22
TC7SP57,58FU
Logic configrations(2/2)
Function
SP57
Schmitt INV
SP58
Schmitt Buffer
SP57
Schmitt INV
SP58
Schmitt Buffer
SP57
Schmitt Buffer
SP58
Schmitt INV
SP57
Schmitt Buffer
SP58
Schmitt INV
Input
Condition
TC7SP57
Logic symbol
TC7SP58
Logic symbol
Function
Table
A= INPUT
B=L-Level
C=L-Level
A
Y
A
Y
Y=OUTPUT
A
B
C
L
L
H
Y
57
58
L
H
L
L
L
L
H
A
B
C
L
H
H
A= INPUT
B=H-Level
C=L-Level
A
Y
A
Y
Y=OUTPUT
Y
57
58
L
H
L
H
L
L
H
A
B
C
L
L
L
A
A=L-Level
B= INPUT
C=H-Level
B
Y
B
Y
Y=OUTPUT
Y
57
58
H
L
H
H
H
H
L
B
C
H
L
H
L
H
H
H
H
H
H
A=H-Level
B=INPUT
C=H-Level
B
Y
B
Y=OUTPUT
4
Y
Y
57
58
2008-12-22
TC7SP57,58FU
Absolute Maximum Rating (Note1)
Characteristics
Symbol
Rating
Unit
Power supply voltage
VCC
-0.5 to 4.6
V
DC input voltage
VIN
-0.5 to 4.6
V
-0.5 to 4.6 (Note2)
DC output voltage
VOUT
Input diode current
IIK
-20
Output diode current
IOK
±20
DC output current
IOUT
±25
mA
Power dissipation
PD
180
mW
ICC/IGND
±25
mA
Tstg
-65 to 150
°C
DC VCC/ground current
Storage temperature
-0.5 to VCC + 0.5(Note3)
V
mA
(Note4)
mA
Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even
destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 2: VCC = 0 V
Note 3: High or Low state. IOUT absolute ratiingmust be observed.
Note 4: VOUT < GND, VOUT > VCC
Operating Ranges (Note1)
Characteristics
Symbol
Rating
Unit
Supply voltage
VCC
1.2 to 3.6
V
Input voltage
VIN
−0.3 to 3.6
V
Output voltage
VOUT
Output current
IOH/IOL
Operating temperature
Topr
0 to 3.6
(Note2)
0 to VCC (Note3)
±8.0
(Note4)
±4.0
(Note5)
±1.5
(Note6)
−40 to 85
V
mA
°C
Note 1: The operating range is required to ensure the normal operation of the device.
Unused inputs must be tied to either VCC or GND.
Note 2: VCC = 0 V
Note 3: High or low state
Note 4: VCC = 3.0 to 3.6 V
Note 5: VCC = 2.3 to 2.7 V
Note 6: VCC = 1.65 to 1.8 V
5
2008-12-22
TC7SP57,58FU
Electrical Characteristics
DC Characteristics (Ta = −40 to 85°C)
Characteristics
H-level
Symbol
Test Condition
⎯
VP
Input voltage
L-level
Hysteresis voltage
⎯
VN
VOH
Input leakage current
VOL
IIN
Power-off leakage current
IOFF
Quiescent supply current
ICC
Increase in ICC per input
ΔICC
1.2
⎯
1.10
1.4
⎯
1.20
1.65
⎯
1.35
2.3
⎯
1.70
3.0
⎯
2.00
3.6
⎯
2.20
1.2
0.10
⎯
1.4
0.20
⎯
1.65
0.30
⎯
2.3
0.50
⎯
Unit
V
V
3.0
0.70
⎯
0.80
⎯
1.2
0.2
0.9
1.4
0.2
0.9
1.65
0.2
0.95
2.3
0.3
1.0
3.0
0.3
1.2
3.6
0.3
1.2
IOH = −100 μA
1.2 to 1.3
Vcc - 0.1
⎯
IOH = −500 μA
1.4 to 1.6
Vcc - 0.2
⎯
IOH = −1.5 mA
1.65 to 1.95
Vcc - 0.3
⎯
IOH = −4.0 mA
2.3 to 2.7
Vcc - 0.4
⎯
IOH = −8.0 mA
3.0 to 3.6
2.40
⎯
IOL = 100 μA
1.2 to 1.3
⎯
0.10
IOL = 500 μA
1.4 to 1.6
⎯
0.20
IOL = 3.0 mA
1.65 to 1.95
⎯
0.25
IOL = 4.0 mA
2.3 to 2.7
⎯
0.40
IOL = 8.0 mA
3.0 to 3.6
⎯
0.40
1.2 to 3.6
⎯
±1.5
μA
0
⎯
1.5
μA
VIN = VCC or GND
1.2 to 3.6
⎯
3.0
VCC ≤ VIN ≤ 3.6 V
1.2 to 3.6
⎯
±3.0
VIH = VCC − 0.6 V
2.7 to 3.6
⎯
100
⎯
VIN = VIH or VIL
Output voltage
L-level
Max
3.6
VH
H-level
Min
VCC (V)
VIN = VIH or VIL
VIN = 0 to 3.6 V
VIN, VOUT = 0 to 3.6 V
6
V
V
μA
2008-12-22
TC7SP57,58FU
AC Characteristics (Ta = −40 to 85°C, Input: tr = tf = 3.0 ns)
Characteristics
Symbol
Test Condition
tpLH
Figure 1, Figure 2
tpHL
CL = 10pF、RL = 1 MΩ
Propagation delay time
tpLH
Figure 1, Figure 2
(A, B,C-Y)
tpHL
CL = 15pF、RL = 1 MΩ
tpLH
Figure 1, Figure 2
tpHL
CL = 30pF、RL = 1 MΩ
Min
Max
1.8± 0.15
1.0
21.0
2.5 ± 0.2
0.8
10.0
3.3 ± 0.3
0.6
7.0
1.8± 0.15
1.0
23.0
2.5 ± 0.2
0.8
11.0
3.3 ± 0.3
0.6
7.7
1.8± 0.15
1.0
27.0
2.5 ± 0.2
0.8
12.0
3.3 ± 0.3
0.6
8.5
VCC (V)
Unit
ns
ns
ns
Capacitive Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Input capacitance
CIN
⎯
Power dissipation capacitance
CPD
fIN = 10 MHz
Typ.
Unit
1.8, 2.5, 3.3
6
pF
1.8, 2.5, 3.3
30
pF
VCC (V)
(Note)
Note : CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating
current consumption without load.
Average operating current can be obtained by the equation:
ICC (opr) = CPD ・ VCC ・ fIN + ICC
7
2008-12-22
TC7SP57,58FU
AC Test Circuit
Output
RL
CL
Measure
Figure 1
AC Waveform
tr =3ns
tf =3ns
90%
VM
Non-Inverting
Input
Inverting
Input
VCC
10%
GND
tr =3ns
tf =3ns
90%
VCC
VM
10%
GND
VOH
Non-Inverting
Output
VM
tpLH
tpHL
VOL
VOH
Inverting
Output
VM
tpHL
Symbol
tpLH
VOL
VCC
3.3 ± 0.3 V
2.5 ± 0.2 V
1.8 V ± 0.15 V
VIN
VCC
VCC
VCC
VM
1.5 V
VCC/2
VCC/2
Figure 2 tpLH, tpHL
8
2008-12-22
TC7SP57,58FU
Package Dimensions
Weight: 0.0068 g (typ)
9
2008-12-22
TC7SP57,58FU
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
10
2008-12-22