PP 167-189 Slides.qxd 5/8/02 10:06 AM Page 171 SERIES 5 0 0 A SWITCHES SUB-MINIATURE SLIDE SWITCHES SPECIFICATIONS Ratings: Insulation Resistance: Dielectric Strength: Operating Temperature: 3 A @ 120 VAC 1 A @ 250 VAC 50,000 make-and-break cycles at full load 10 mΩ max. typical @ 2-4 VDC 100mA for both silver and gold plated contacts 1,000MΩ min. 1,000 V rms at sea level -30°C to 85°C MATERIALS Case: Housing: Slide Handle: Contact & Terminals: Diallyl phthalate (DAP) Stainless steel Nylon Gold or Silver plated copper alloy Electrical Life: Contact Resistance: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. HOW TO ORDER Phone: 763-504-3525 Series Model No. Termination Contact Material SSP1 SSP3 M2 M6 Q=Silver R=Gold SSP1 M2 500A EXAMPLE 500A Fax: 763-531-8235 R www.e -switch.com [email protected] 171 PP 167-189 Slides.qxd 5/8/02 10:06 AM Page 172 SERIES 5 0 0 A SWITCHES SUB-MINIATURE SLIDE SWITCHES Switching Position Model No. SPDT SSP-1 ON NONE ON SSP-3 Term. Comm. ON OFF ON 2-1 OPEN 2-3 Schematic ( ) = Momentary 2 Comm. 1 3 TERMINATION OPTIONS P.C. MOUNTING M2 P.C. MOUNTING M6 CONTACT MATERIAL OPTIONS Q R Fixed Terminal: Silver plated copper alloy Moving Contact: Silver plated copper alloy Rating: 3 Amps with resistive load @ 120VAC or 28VDC 1 Amp with resistive load @ 250VAC Fixed Terminal: Copper alloy with gold plate over nickel plate Moving Contact: Copper alloy with gold plate over nickel plate Rating: 0.4 Volt-Amps (VA) max. @ 20V max. (AC or DC) 172 Phone: 763-504-3525 Fax: 763-531-8235 www.e -switch.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. PC PIN [email protected]