FAIRCHILD 74F30SC

74F30 8-Input NAND Gate
April 1988
Revised January 2004
74F30
8-Input NAND Gate
General Description
This device contains a single gate, which performs the
logic NAND function.
Ordering Code:
Order Number
Package Number
Package Description
74F30SC
(Note 1)
M14A
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
74F30SJ
M14D
14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
74F30PC
N14A
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Note 1: Devices also available in Tape and Reel. Specify by appending the letter “X” to the ordering code.
Logic Symbol
Connection Diagram
IEEE/IEC
Function Table
Unit Loading/Fan Out
Inputs
Input IIH/IIL
U.L.
Pin Names Description
HIGH/LOW Output IOH/IOL
Output
A0
A1
A2
A3
A4
A5
A6
A7
O
L
X
X
X
X
X
X
X
H
H
A0–A7
Inputs
1.0/1.0
20 µA/−0.6 mA
X
L
X
X
X
X
X
X
O
Output
50/33.3
−1 mA/20 mA
X
X
L
X
X
X
X
X
H
X
X
X
L
X
X
X
X
H
X
X
X
X
L
X
X
X
H
X
X
X
X
X
L
X
X
H
X
X
X
X
X
X
L
X
H
X
X
X
X
X
X
X
L
H
H
H
H
H
H
H
H
H
L
H = HIGH Voltage Level
L = LOW Voltage Level
X = Immaterial
© 2004 Fairchild Semiconductor Corporation
DS009560
www.fairchildsemi.com
74F30
Absolute Maximum Ratings(Note 2)
Storage Temperature
−65°C to +150 °C
Ambient Temperature under Bias
−55°C to +125 °C
Junction Temperature under Bias
−55°C to +150C
VCC Pin Potential to Ground Pin
−0.5V to +7.0V
Input Voltage (Note 3)
−0.5V to +7.0V
Input Current (Note 3)
−30 mA to +5.0 mA
Recommended Operating
Conditions
0°C to +70°C
Free Air Ambient Temperature
+4.5V to +5.5V
Supply Voltage
Voltage Applied to Output
in HIGH State (with VCC = 0V)
Standard Output
−0.5V to VCC
3-STATE Output
−0.5V to +5.5V
Note 2: Absolute maximum ratings are values beyond which the device
may be damaged or have its useful life impaired. Functional operation
under these conditions is not implied.
Note 3: Either voltage limit or current limit is sufficient to protect inputs.
Current Applied to Output
in LOW State (Max)
twice the rated IOL (mA)
DC Electrical Characteristics
Symbol
Parameter
Min
Typ
Max
VCC
Conditions
Input HIGH Voltage
VIL
Input LOW Voltage
0.8
V
VCD
Input Clamp Diode Voltage
−1.2
V
Min
V
Min
0.5
V
Min
IOL = 20 mA
5.0
µA
Max
VIN = 2.7V
7.0
µA
Max
VIN = 7.0V
50
µA
Max
VOUT = VCC
V
0.0
3.75
µA
0.0
−0.6
mA
Max
VIN = 0.5V
−150
mA
Max
VOUT = 0V
VOH
2.0
Units
VIH
Output HIGH
Voltage
VOL
Output LOW
2.5
5% VCC
2.7
10% VCC
Voltage
IIH
10% VCC
V
Input HIGH
Current
IBVI
Input HIGH Current
Breakdown Test
ICEX
Output HIGH
Leakage Current
VID
Input Leakage
4.75
Test
IOD
Output Leakage
Circuit Current
IIL
Input LOW Current
IOS
Output Short-Circuit Current
ICCH
Power Supply Current
ICCL
Power Supply Current
−60
0.5
Recognized as a HIGH Signal
Recognized as a LOW Signal
IIN = −18 mA
IOH = −1 mA
IOH = −1 mA
IID = 1.9 µA
All Other Pins Grounded
VIOD = 150 mV
All Other Pins Grounded
1.5
mA
Max
VO = HIGH
4.5
mA
Max
VO = LOW
AC Electrical Characteristics
Symbol
Parameter
TA = +25°C
TA = 0°C to +70°C
VCC = +5.0V
VCC = +5.0V
CL = 50 pF
CL = 50 pF
Min
Typ
Max
Min
Max
tPLH
Propagation Delay
1.0
3.7
5.0
1.0
5.5
tPHL
An to O
1.5
2.8
5.0
1.5
5.5
www.fairchildsemi.com
2
Units
ns
74F30
Physical Dimensions inches (millimeters) unless otherwise noted
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
Package Number M14A
3
www.fairchildsemi.com
74F30
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M14D
www.fairchildsemi.com
4
74F30 8-Input NAND Gate
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Package Number N14A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
5
www.fairchildsemi.com