ETC 74V2GU04CTR

74V2GU04
TRIPLE INVERTER (SINGLE STAGE)
■
■
■
■
■
■
■
■
HIGH SPEED: tPD = 3.5ns (TYP.) at VCC = 5V
LOW POWER DISSIPATION:
ICC = 1µA(MAX.) at TA=25°C
HIGH NOISE IMMUNITY:
VNIH = V NIL = 10% VCC (MIN.)
POWER DOWN PROTECTION ON INPUT
SYMMETRICAL OUTPUT IMPEDANCE:
|IOH| = IOL = 8mA (MIN) at VCC = 4.5V
BALANCED PROPAGATION DELAYS:
tPLH ≅ tPHL
OPERATING VOLTAGE RANGE:
VCC(OPR) = 2V to 5.5V
IMPROVED LATCH-UP IMMUNITY
DESCRIPTION
The 74V2GU04 is an advanced high-speed
CMOS TRIPLE INVERTER (SINGLE STAGE)
fabricated with sub-micron silicon gate and
double-layer metal wiring C2MOS technology.
The internal circuit is composed of a single stages
inverter, then an unbuffered output.
SOT23-8L
SOT323-8L
ORDER CODES
PACKAGE
T&R
SOT23-8L
SOT323-8L
74V2GU04STR
74V2GU04CTR
it can be used in analog application such a crystal
oscillator.
Power down protection is provided on input and 0
to 7V can be accepted on input with no regard to
the supply voltage. This device can be used to
interface 5V to 3V.
PIN CONNECTION AND IEC LOGIC SYMBOLS
May 2002
1/9
74V2GU04
INPUT EQUIVALENT CIRCUIT
PIN DESCRIPTION
PIN No
SYMBOL
1, 3, 6
7, 5, 2
4
1A, 2A, 3A
1Y, 2Y, 3Y
GND
VCC
8
NAME QND FUNCTION
Data Inputs
Data Outputs
Ground (0V)
Positive Supply Voltage
TRUTH TABLE
A
Y
L
H
H
L
ABSOLUTE MAXIMUM RATINGS
Symbol
V CC
Parameter
Supply Voltage
VI
DC Input Voltage
VO
DC Output Voltage
IIK
DC Input Diode Current
IOK
DC Output Diode Current
IO
DC Output Current
ICC or IGND DC VCC or Ground Current
Storage Temperature
Tstg
TL
Lead Temperature (10 sec)
Value
Unit
-0.5 to +7.0
V
-0.5 to +7.0
V
-0.5 to VCC + 0.5
- 20
V
mA
± 20
mA
± 25
mA
± 50
mA
-65 to +150
°C
260
°C
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is
not implied.
RECOMMENDED OPERATING CONDITIONS
Symbol
V CC
2/9
Parameter
Supply Voltage
Value
Unit
2 to 5.5
V
VI
Input Voltage
0 to 5.5
V
VO
Output Voltage
0 to VCC
V
Top
Operating Temperature
-55 to 125
°C
74V2GU04
DC SPECIFICATIONS
Test Condition
Symbol
VIH
V IL
VOH
VOL
II
ICC
Parameter
High Level Input
Voltage
Low Level Input
Voltage
High Level Output
Voltage
Low Level Output
Voltage
Input Leakage
Current
Quiescent Supply
Current
Value
TA = 25°C
VCC
(V)
Min.
2.0
3.0 to
5.5
2.0
3.0 to
5.5
Typ.
Max.
-40 to 85°C
-55 to 125°C
Min.
Min.
Max.
1.7
1.7
1.7
0.8VCC
0.8VCC
0.8VCC
Max.
V
0.3
0.3
0.3
0.2VCC
0.2VCC
0.2VCC
2.0
IO=-50 µA
1.8
2.0
1.8
1.8
3.0
IO=-50 µA
2.7
3.0
2.7
2.7
4.5
IO=-50 µA
4.0
4.5
4.0
4.0
3.0
IO=-4 mA
2.58
2.48
2.4
4.5
IO=-8 mA
3.94
2.0
IO=50 µA
0.0
0.2
0.2
0.2
3.8
Unit
V
V
3.7
3.0
IO=50 µA
0.0
0.3
0.3
0.3
4.5
IO=50 µA
0.0
0.5
0.5
0.5
3.0
IO=4 mA
0.36
0.44
0.55
4.5
IO=8 mA
0.36
0.44
0.55
0 to
5.5
VI = 5.5V or GND
± 0.1
±1
±1
µA
5.5
VI = VCC or GND
1
10
20
µA
V
AC ELECTRICAL CHARACTERISTICS (Input tr = tf = 3ns)
Test Condition
Symbol
Parameter
tPLH tPHL Propagation Delay
Time
VCC
(V)
CL
(pF)
3.3 (*)
(*)
Value
TA = 25°C
-55 to 125°C
Typ.
Max.
Min.
Max.
Min.
15
4.4
6.5
1.0
8.0
1.0
9.0
50
4.8
7.0
1.0
9.0
1.0
10.0
5.0(**)
15
3.5
5.5
1.0
6.0
1.0
7.5
5.0(**)
50
4.1
6.0
1.0
7.0
1.0
8.0
3.3
Min.
-40 to 85°C
Unit
Max.
ns
(*) Voltage range is 3.3V ± 0.3V
(**) Voltage range is 5.0V ± 0.5V
CAPACITIVE CHARACTERISTICS
Test Condition
Symbol
Value
TA = 25°C
Parameter
Min.
Typ.
Max.
10
CIN
Input Capacitance
5
C PD
Power Dissipation
Capacitance
(note 1)
10
-40 to 85°C
-55 to 125°C
Min.
Min.
Max.
10
Unit
Max.
10
pF
pF
1) CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without
load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + ICC
3/9
74V2GU04
TEST CIRCUIT
C L = 15/50pF or equivalent (includes jig and probe capacitance)
R T = ZOUT of pulse generator (typically 50Ω)
WAVEFORM: PROPAGATION DELAY (f=1MHz; 50% duty cycle)
4/9
74V2GU04
SOT23-8L MECHANICAL DATA
mm.
mils
DIM.
MIN.
TYP
MAX.
MIN.
TYP.
MAX.
A
0.90
1.45
35.4
57.1
A1
0.00
0.15
0.0
5.9
A2
0.90
1.30
35.4
51.2
b
0.22
0.38
8.6
14.9
C
0.09
0.20
3.5
7.8
D
2.80
3.00
110.2
118.1
E
2.60
3.00
102.3
118.1
E1
1.50
1.75
59.0
68.8
e
0
e1
L
0.35
.65
25.6
1.95
76.7
0.55
13.7
21.6
5/9
74V2GU04
SOT323-8L MECHANICAL DATA
mm.
mils
DIM.
MIN.
MAX.
MIN.
TYP.
MAX.
A
0.80
1.10
31.5
43.3
A1
0.00
0.10
0.0
3.9
A2
0.80
1.00
31.5
34.9
b
0.13
0.28
5.1
11.0
C
0.10
0.18
3.9
7.1
D
1.80
2.20
70.9
86.6
E
1.80
2.40
70.9
94.5
E1
1.15
1.35
45.3
53.1
e
0.5
19.7
e1
1.5
59.0
L
6/9
TYP
0.10
0.30
3.9
11.8
74V2GU04
Tape & Reel SOT23-xL MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
A
MAX.
MIN.
TYP.
180
13.0
7.086
C
12.8
D
20.2
0.795
N
60
2.362
T
13.2
MAX.
0.504
0.512
14.4
0.519
0.567
Ao
3.13
3.23
3.33
0.123
0.127
0.131
Bo
3.07
3.17
3.27
0.120
0.124
0.128
Ko
1.27
1.37
1.47
0.050
0.054
0.0.58
Po
3.9
4.0
4.1
0.153
0.157
0.161
P
3.9
4.0
4.1
0.153
0.157
0.161
7/9
74V2GU04
Tape & Reel SOT323-xL MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
MAX.
MIN.
TYP.
MAX.
A
175
180
185
6.889
7.086
7.283
C
12.8
13
13.2
0.504
0.512
0.519
D
20.2
N
59.5
0.795
60
T
8/9
60.5
2.362
14.4
0.567
Ao
2.25
0.088
Bo
2.7
0.106
Ko
1.2
0.047
Po
3.98
4
4.2
0.156
0.157
0.165
P
3.98
4
4.2
0.156
0.157
0.165
74V2GU04
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from
its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications
mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information
previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or
systems without express written approval of STMicroelectronics.
 The ST logo is a registered trademark of STMicroelectronics
 2002 STMicroelectronics - Printed in Italy - All Rights Reserved
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco
Singapore - Spain - Sweden - Switzerland - United Kingdom - United States.
 http://www.st.com
9/9