KINGBRIGHT ACDC04-41SRWA-F01

SURFACE MOUNT DISPLAY
PRELIMINARY SPEC
Part Number: ACDC04-41SRWA-F01
Super Bright Red
Features
Description
z 0.4INCH DIGIT HEIGHT.
The Super Bright Red source color devices are made with
z LOW CURRENT OPERATION.
Gallium Aluminum Arsenide Red Light Emitting Diode.
z EXCELLENT CHARACTER APPEARANCE.
z I.C. COMPATIBLE.
z MECHANICALLY RUGGED.
z GRAY FACE,WHITE SEGMENT.
z PACKAGE: 250PCS/ REEL.
z MOISTURE SENSITIVITY LEVEL : LEVEL 4.
z RoHS COMPLIANT.
Package Dimensions& Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
3.The gap between the reflector and PCB shall not exceed 0.25mm.
SPEC NO: DSAG0052
REV NO: V.8
DATE: JUN/14/2007
PAGE: 1 OF 5
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Y.H.CHEN
ERP: 1352000311
Selection Guide
Part No.
Dice
ACDC04-41SRWA-F01
Iv (ucd) [1]
@ 10mA
Lens Type
Super Bright Red (GaAlAs)
WHITE DIFFUSED
Description
Min.
Typ.
4700
18000
Common Cathode,
Rt. Hand Decimal
Units
Test Conditions
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
λpeak
Peak Wavelength
Super Bright Red
660
nm
IF=20mA
λD [1]
Dominant Wavelength
Super Bright Red
640
nm
IF=20mA
Δλ1/2
Spectral Line Half-width
Super Bright Red
20
nm
IF=20mA
C
Capacitance
Super Bright Red
45
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Super Bright Red
1.85
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Red
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Red
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
155
mA
5
V
Reverse Voltage
Operating / Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAG0052
REV NO: V.8
DATE: JUN/14/2007
PAGE: 2 OF 5
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Y.H.CHEN
ERP: 1352000311
Super Bright Red
ACDC04-41SRWA-F01
SPEC NO: DSAG0052
REV NO: V.8
DATE: JUN/14/2007
PAGE: 3 OF 5
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Y.H.CHEN
ERP: 1352000311
ACDC04-41SRWA-F01
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.15)
Reel Dimension
Tape Specifications
(Units : mm)
SPEC NO: DSAG0052
REV NO: V.8
DATE: JUN/14/2007
PAGE: 4 OF 5
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Y.H.CHEN
ERP: 1352000311
PACKING & LABEL SPECIFICATIONS
ACDC04-41SRWA-F01
SPEC NO: DSAG0052
REV NO: V.8
DATE: JUN/14/2007
PAGE: 5 OF 5
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Y.H.CHEN
ERP: 1352000311