AD ADG604

a
1 pC Charge Injection, 100 pA Leakage
CMOS 5 V/5 V/3 V 4-Channel Multiplexer
ADG604
FEATURES
1 pC Charge Injection (Over the Full Signal Range)
2.7 V to 5.5 V Dual Supply
2.7 V to 5.5 V Single Supply
Automotive Temperature Range: –40C to +125C
100 pA Max @ 25C Leakage Currents
85 Typ On Resistance
Rail-to-Rail Operation
Fast Switching Times
Typical Power Consumption (<0.1 W)
TTL/CMOS Compatible Inputs
14-Lead TSSOP Package
APPLICATIONS
Automatic Test Equipment
Data Acquisition Systems
Battery-Powered Instruments
Communication Systems
Sample and Hold Systems
Remote-Powered Equipment
Audio and Video Signal Routing
Relay Replacement
Avionics
FUNCTIONAL BLOCK DIAGRAM
ADG604
S1 4
S2 5
6
D
S3 11
S4 10
1 OF 4
DECODER
1
14
2
A0
A1
EN
GENERAL DESCRIPTION
PRODUCT HIGHLIGHTS
The ADG604 is a CMOS analog multiplexer, comprising four
single channels. It operates from a dual supply of ± 2.7 V to
± 5.5 V, or from a single supply of 2.7 V to 5.5 V.
1. Ultralow Charge Injection (Q INJ: ± 1.5 pC Typ over the Full
Signal Range)
The ADG604 switches one of four inputs to a common output,
D, as determined by the 3-bit binary address lines, A0, A1, and
EN. A Logic “0” on the EN pin disables the device.
3. Dual ± 2.7 V to ± 5.5 V or Single 2.7 V to 5.5 V Supply
The ADG604 offers ultralow charge injection of ±1.5 pC over the
entire signal range and leakage currents of 10 pA typical at 25°C.
It offers on resistance of 85 Ω typ, which is matched to within 2 Ω
between channels. The ADG604 also has low power dissipation yet
gives high switching speeds. The ADG604 is available in a 14-lead
TSSOP package.
5. Small 14-Lead TSSOP Package
2. Leakage Current <0.5 nA max @ 85°C
4. Fully Specified to 125°C
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
www.analog.com
Fax: 781/326-8703
© Analog Devices, Inc., 2002
ADG604–SPECIFICATIONS
DUAL SUPPLY1
(VDD = +5 V 10%, VSS = –5 V 10%, GND = 0 V. All specifications –40C to +125C unless otherwise noted.)
Parameter
25C
–40C to
+85C
–40C to
+125C
Unit
VSS to VDD
V
140
160
Ω Typ
Ω Max
5.5
6.5
55
60
ANALOG SWITCH
Analog Signal Range
On Resistance (RON)
85
115
On Resistance Match Between
Channels (⌬RON)
On-Resistance Flatness (RFLAT(ON))
LEAKAGE CURRENTS
Source OFF Leakage IS (OFF)
2
4
25
40
± 0.01
± 0.1
± 0.01
± 0.1
± 0.01
± 0.1
Drain OFF Leakage ID (OFF)
Channel ON Leakage ID, IS (ON)
DIGITAL INPUTS
Input High Voltage, VINH
Input Low Voltage, VINL
Input Current
IINL or IINH
VDD = +4.5 V, VSS = –4.5 V
VS = ± 3 V, IS = –1 mA,
Test Circuit 1
VS = ± 3 V, IS = –1 mA
VS = ± 3 V, IS = –1 mA
VDD = +5.5 V, VSS = –5.5 V
VS = ± 4.5 V, VD = ⫿4.5 V,
Test Circuit 2
VS = ± 4.5 V, VD = ⫿4.5 V,
Test Circuit 2
VS = VD = ± 4.5 V, Test Circuit 3
± 0.25
±4
± 0.5
±8
± 0.5
± 10
nA Typ
nA Max
nA Typ
nA Max
nA Typ
nA Max
2.4
0.8
V Min
V Max
± 0.1
µA Typ
µA Max
pF Typ
VIN = VINL or VINH
VS1 = +3 V, VS4 = –3 V, RL = 300 Ω,
CL = 35 pF, Test Circuit 4
RL = 300 Ω, CL = 35 pF
VS = 3 V, Test Circuit 6
RL = 300 Ω, CL = 35 pF
VS = 3 V, Test Circuit 6
RL = 300 Ω, CL = 35 pF,
VS1 = VS2 = 3 V, Test Circuit 5
VS = 0 V, RS = 0 Ω, CL = 1nF, Test Circuit 7
RL = 50 Ω, CL = 5 pF, f = 10 MHz,
Test Circuit 8
RL = 50 Ω, CL = 5 pF, f = 10 MHz,
Test Circuit 10
RL = 50 Ω, CL = 5 pF, Test Circuit 9
f = 1 MHz
f = 1 MHz
f = 1 MHz
0.005
CIN, Digital Input Capacitance
Ω Typ
Ω Max
Ω Typ
Ω Max
Test Conditions/Comments
2
2
DYNAMIC CHARACTERISTICS
Transition Time
Break-Before-Make Time Delay, tBBM
70
100
80
105
30
45
20
Charge Injection
Off Isolation
–1
–75
ns Typ
ns Max
ns Typ
ns Max
ns Typ
ns Max
ns Typ
ns Min
pC Typ
dB Typ
Channel-to-Channel Crosstalk
–70
dB Typ
Bandwidth –3 dB
CS (OFF)
CD (OFF)
CD, CS (ON)
280
5
17
18
MHz Typ
pF Typ
pF Typ
pF Typ
0.001
µA Typ
µA Max
µA Typ
µA Max
tON Enable
tOFF Enable
120
150
130
150
55
65
10
POWER REQUIREMENTS
IDD
1.0
Iss
0.001
1.0
VDD = +5.5 V, VSS = –5.5 V
Digital Inputs = 0 V or 5.5 V
Digital Inputs = 0 V or 5.5 V
NOTES
1
Y Version Temperature Range: –40°C to +125°C
2
Guaranteed by design, not subject to production test.
Specifications subject to change without notice.
–2–
REV. 0
ADG604
SINGLE SUPPLY1 (V
DD
= 5 V 10%, VSS = 0 V, GND = 0 V. All specifications –40C to +125C unless otherwise noted.)
Parameter
25C
–40C to
+85C
–40C to
+125C
Unit
0 V to VDD
V
350
380
Ω Typ
Ω Max
12
13
Ω Typ
Ω Max
ANALOG SWITCH
Analog Signal Range
On Resistance (RON)
210
290
On Resistance Match Between
Channels (⌬RON)
3
LEAKAGE CURRENTS
Source OFF Leakage IS (OFF)
Drain OFF Leakage ID (OFF)
Channel ON Leakage ID, IS (ON)
DIGITAL INPUTS
Input High Voltage, VINH
Input Low Voltage, VINL
Input Current
IINL or IINH
± 0.01
± 0.1
± 0.01
± 0.1
± 0.01
± 0.1
VDD = 4.5 V, VSS = 0 V
VS = 3.5 V, IS = –1 mA,
Test Circuit 1
VS = 3.5 V, IS = –1 mA
VDD = 5.5 V
VS = 1 V/4.5 V, VD = 4.5 V/1 V,
Test Circuit 2
VS = 1 V/4.5 V, VD = 4.5 V/1 V,
Test Circuit 2
VS = VD = 4.5 V/1 V,
Test Circuit 3
± 0.25
±4
± 0.5
±8
± 0.5
10
nA Typ
nA Max
nA Typ
nA Max
nA Typ
nA Max
2.4
0.8
V Min
V Max
± 0.1
µA Typ
µA Max
pF Typ
VIN = VINL or VINH
VS1 = 3 V, VS4 = 0 V, RL = 300 Ω,
CL = 35 pF, Test Circuit 4
RL = 300 Ω, CL = 35 pF
VS = 3 V, Test Circuit 6
RL = 300 Ω, CL = 35 pF
VS = 3 V, Test Circuit 6
RL = 300 Ω, CL = 35 pF,
VS1 = VS2 = 3 V, Test Circuit 5
VS = 0 V , RS = 0 Ω, CL = 1 nF,
Test Circuit 7
RL = 50 Ω, CL = 5 pF, f = 10 MHz,
Test Circuit 8
RL = 50 Ω, CL = 5 pF, f = 10 MHz,
Test Circuit 10
RL = 50 Ω, CL = 5 pF, Test Circuit 9
f = 1 MHz
f = 1 MHz
f = 1 MHz
0.005
CIN, Digital Input Capacitance
Test Conditions/Comments
2
2
DYNAMIC CHARACTERISTICS
Transition Time
Break-Before-Make Time Delay, tBBM
90
150
105
150
45
70
30
Charge Injection
0.3
ns Typ
ns Max
ns Typ
ns Max
ns Typ
ns Max
ns Typ
ns Min
pC Typ
Off Isolation
–65
dB Typ
Channel-to-Channel Crosstalk
–70
dB Typ
Bandwidth –3 dB
CS (OFF)
CD (OFF)
CD, CS (ON)
250
5
17
18
MHz Typ
pF Typ
pF Typ
pF Typ
tON Enable
tOFF Enable
185
210
190
220
80
90
10
VDD = 5.5 V
Digital Inputs = 0 V or 5.5 V
POWER REQUIREMENTS
IDD
0.001
1.0
NOTES
1
Y Version Temperature Range: –40°C to +125°C
2
Guaranteed by design, not subject to production test.
Specifications subject to change without notice.
REV. 0
–3–
µA Typ
µA Max
ADG604–SPECIFICATIONS
SINGLE SUPPLY1
(VDD = 3 V 10%, VSS = 0 V, GND = 0 V. All specifications –40C to +125C unless otherwise noted.)
Parameter
25C
–40C to
+85C
ANALOG SWITCH
Analog Signal Range
On Resistance (RON)
380
420
On Resistance Match Between
Channels (⌬RON)
LEAKAGE CURRENTS
Source OFF Leakage IS (OFF)
Drain OFF Leakage ID (OFF)
Channel ON Leakage ID, IS (ON)
DIGITAL INPUTS
Input High Voltage, VINH
Input Low Voltage, VINL
Input Current
IINL or IINH
± 0.01
± 0.1
± 0.01
± 0.1
± 0.01
± 0.1
–40C to
+125C
Unit
0 V to VDD
V
460
Ω Typ
VDD = 2.7 V, VSS = 0 V
VS = 1.5 V, IS = –1 mA,
Test Circuit 1
5
Ω Typ
VS = 1.5 V, IS = –1 mA
VDD = 3.3 V
VS = 1 V/3 V, VD = 3 V/1 V,
Test Circuit 2
VS = 1 V/3 V, VD = 3 V/1 V,
Test Circuit 2
VS = VD = 1 V/3 V,
Test Circuit 3
± 0.25
±4
± 0.5
±8
± 0.5
± 10
nA Typ
nA Max
nA Typ
nA Max
nA Typ
nA Max
2.0
0.8
V Min
V Max
± 0.1
µA Typ
µA Max
pF Typ
VIN = VINL or VINH
VS1 = 2 V, VS4 = 0 V, RL = 300 Ω,
CL = 35 pF, Test Circuit 4
RL = 300 Ω, CL = 35 pF
VS = 2 V, Test Circuit 6
RL = 300 Ω, CL = 35 pF
VS = 2 V, Test Circuit 6
RL = 300 Ω, CL = 35 pF,
VS1 = VS2 = 2 V, Test Circuit 5
VS = 0 V to 3.3 V, RS = 0 Ω, CL = 1 µF,
Test Circuit 7
RL = 50 Ω, CL = 5 pF, f = 10 MHz,
Test Circuit 8
RL = 50 Ω, CL = 5 pF, f = 10 MHz,
Test Circuit 10
RL = 50 Ω, CL = 5 pF, Test Circuit 9
f = 1 MHz
f = 1 MHz
f = 1 MHz
0.005
CIN, Digital Input Capacitance
Test Conditions/Comments
2
2
DYNAMIC CHARACTERISTICS
Transition Time
Break-Before-Make Time Delay, tBBM
170
320
180
250
100
160
100
Charge Injection
0.3
ns Typ
ns Max
ns Typ
ns Max
ns Typ
ns Max
ns Typ
ns Min
pC Typ
Off Isolation
–65
dB Typ
Channel-to-Channel Crosstalk
70
dB Typ
Bandwidth –3 dB
CS (OFF)
CD (OFF)
CD, CS (ON)
250
5
17
18
MHz Typ
pF Typ
pF Typ
pF Typ
tON Enable
tOFF Enable
390
450
265
390
205
225
10
VDD = 3.3 V
Digital Inputs = 0 V or 3.3 V
POWER REQUIREMENTS
IDD
0.001
1.0
µA Typ
µA Max
NOTES
1
Y Version Temperature Range: –40°C to +125°C
2
Guaranteed by design, not subject to production test.
Specifications subject to change without notice.
–4–
REV. 0
ADG604
ABSOLUTE MAXIMUM RATINGS 1
(TA = 25°C unless otherwise noted)
VDD to VSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 V
VDD to GND . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +6.5 V
VSS to GND . . . . . . . . . . . . . . . . . . . . . . . . . +0.3 V to –6.5 V
Analog Inputs2 . . . . . . . . . . . . . . . . VSS –0.3 V to VDD + 0.3 V
Digital Inputs2 . . . . . . . . . . . . . . . . . –0.3 V to VDD + 0.3 V or
. . . . . . . . . . . . . . . . . . . . . . 30 mA, Whichever Occurs First
Peak Current, S or D . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA
(Pulsed at 1 ms, 10% Duty Cycle Max)
Continuous Current, S or D . . . . . . . . . . . . . . . . . . . . 10 mA
Operating Temperature Range
Automotive (Y Version) . . . . . . . . . . . . . . –40°C to +125°C
Storage Temperature Range . . . . . . . . . . . . –65°C to +150°C
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
TSSOP Package
␪JA Thermal Impedance . . . . . . . . . . . . . . . . . . . . 150°C/W
␪JC Thermal Impedance . . . . . . . . . . . . . . . . . . . . . 27°C/W
Lead Temperature, Soldering (10 seconds) . . . . . . . . . 300°C
IR Reflow, Peak Temperature . . . . . . . . . . . . . . . . . 220°C
NOTES
1
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those listed in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability. Only one absolute
maximum rating may be applied at any one time.
2
Overvoltages at EN, A0, A1, S, or D will be clamped by internal diodes. Current
should be limited to the maximum ratings given.
ORDERING GUIDE
Model Option
Temperature Range
Package Description
Package
ADG604YRU
–40°C to +125°C
Thin Shrink Small Outline (TSSOP)
RU-14
PIN CONFIGURATION
A0 1
14 A1
EN 2
VSS 3
Table I. Truth Table
13 GND
ADG604
12 VDD
TOP VIEW
S1 4 (Not To Scale) 11 S3
S2 5
10 S4
D 6
9
NC
NC 7
8
NC
A1
A0
EN
ON Switch
X
0
0
1
1
X
0
1
0
1
0
1
1
1
1
None
1
2
3
4
NC = NO CONNECT
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the ADG604 features proprietary ESD protection circuitry, permanent damage may occur on
devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
REV. 0
–5–
WARNING!
ESD SENSITIVE DEVICE
ADG604
TERMINOLOGY
VDD
VSS
GND
IDD
ISS
S
D
RON
⌬RON
RFLAT(ON)
IS (OFF)
ID (OFF)
ID, IS (ON)
V D , VS
VINL
VINH
IINL (IINH)
CS (OFF)
CD (OFF)
CD, CS (ON)
CIN
tON (EN)
tOFF (EN)
tTRANSITION
tBBM
Charge Injection
Crosstalk
Off Isolation
Bandwidth
Insertion Loss
Most Positive Power Supply Potential
Most Negative Power Supply in a Dual Supply Application. In single supply applications, this should be tied to
ground at the device.
Ground (0 V) Reference
Positive Supply Current
Negative Supply Current
Source Terminal. May be an input or output.
Drain Terminal. May be an input or output.
Ohmic Resistance between D and S
On Resistance Match between any two channels, i.e., RON Max – RON Min
Flatness is defined as the difference between the maximum and minimum value of On resistance as measured
over the specified analog signal range.
Source Leakage Current with the Switch “OFF”
Drain Leakage Current with the Switch “OFF”
Channel Leakage Current with the Switch “ON”
Analog Voltage on Terminals D, S
Maximum Input Voltage for Logic “0”
Minimum Input Voltage for Logic “1”
Input Current of the Digital Input
Channel Input Capacitance for “OFF” Condition
Channel Output Capacitance for “OFF” Condition
“On” Switch Capacitance
Digital Input Capacitance
Delay time between the 50% and 90% points of the digital input and switch “ON” condition.
Delay time between the 50% and 90% points of the digital input and switch “OFF” condition.
Delay time between the 50% and 90% points of the digital input and switch “ON” condition when switching
from one address state to another.
“OFF” time or “ON” time measured between the 80% points of both switches, when switching from one address
state to another.
A measure of the glitch impulse transferred from the digital input to the analog output during switching.
A measure of unwanted signal that is coupled through from one channel to another as a result of parasitic capacitance.
A measure of unwanted signal coupling through an “On” switch.
Frequency Response of the “On” Switch
Loss Due to the On Resistance of the Switch
–6–
REV. 0
Typical Performance Characteristics–ADG604
350
250
VDD = 5V
VSS = 0V
TA = 25C
VDD , V SS = 2.5V
300
VDD , V SS = 3V
ON RESISTANCE – ON RESISTANCE – 200
VDD , V SS = 3.3V
150
100
50
VDD , V SS = 4.5V
250
TA = +125C
200
TA = +85C
150
100
TA = +25C
50
TA = –40C
VDD , V SS = 5V
0
–5
–4
–3
–2
–1
0
1
2
3
4
0
0.0
5
0.5
1.0
1.5
VD, VS – V
TA = 25C
VSS = 0V
VDD = 2.7V
450
4.0
4.5
5.0
ID (OFF)
IS (OFF)
1
350
CURRENT – nA
ON RESISTANCE – VDD = +5V
VSS = –5V
2
400
300
VDD = 3V
VDD = 3.3V
200
VDD = 4.5V
150
0
–1
ID, IS (ON)
–2
–3
–4
100
VDD = 5V
–5
50
–6
0.5
1.0
1.5
2.0
2.5
3.0
VD, VS – V
3.5
4.0
4.5
0
5.0
TPC 2. On Resistance vs. VD (VS), Single Supply
20
40
60
80
TEMPERATURE – C
100
120
TPC 5. Leakage Currents vs. Temperature, Dual Supply
180
160
3.5
3
500
0
0.0
2.5
3.0
VD, VS – V
TPC 4. On Resistance vs. VD (VS) for Different
Temperatures, Single Supply
TPC 1. On Resistance vs. VD (VS), Dual Supply
250
2.0
3
VDD = +5V
VSS = –5V
VDD = 5V
VSS = 0V
2
IS (OFF)
1
TA = +125C
120
CURRENT – nA
ON RESISTANCE – 140
TA = +85C
100
80
60
0
–1
ID (OFF)
–2
–3
ID, IS (ON)
40
–4
TA = –40C
TA = +25C
20
0
–5
–5
–4
–3
–2
–1
0
1
VD, VS – V
2
3
4
–6
5
0
40
60
80
TEMPERATURE – C
100
120
TPC 6. Leakage Currents vs. Temperature, Single Supply
TPC 3. On Resistance vs. VD (VS) for Different
Temperatures, Dual Supply
REV. 0
20
–7–
ADG604
1.0
0
TA = 25C
TA = 25C
–10
–20
ATTENUATION – dB
CHARGE INJECTION – pC
0.5
0
VDD = 3V
VSS = 0V
–0.5
VDD = +5V
VSS = 0V
–1.0
VDD = +5V
VSS = 0V
–40
–50
VDD = +5V
VSS = –5V
–60
–70
VDD = +5V
VSS = –5V
–1.5
–30
–80
–2.0
–5
–4
–3
–2
–1
0
1
2
3
4
–90
0.3
5
1
VS – V
TPC 7. Charge Injection vs. Source Voltage
1000
TPC 10. Crosstalk vs. Frequency
160
0
TA = 25C
140
–2
VDD = 5V
VSS = 0V
100
tON
80
VDD = +5V
VSS = –5V
VDD = 5V
VSS = 0V
60
tOFF
40
VDD = +5V
VSS = –5V
–4
ATTENUATION – dB
120
TIME – ns
10
100
FREQUENCY – MHz
–6
VDD = +5V
VSS = 0V
–8
–10
–12
–14
20
VDD = +5V
VSS = –5V
0
–40
–20
0
20
40
60
80
100
–16
–18
0.3
120
TEMPERATURE – C
TPC 8. tON/tOFF Times vs. Temperature
1
10
100
FREQUENCY – MHz
1000
TPC 11. On Response vs. Frequency
0
TA = 25C
–10
ATTENUATION – dB
–20
VDD = +5V
VSS = 0V
–30
–40
VDD = +5V
VSS = –5V
–50
–60
–70
–80
–90
0.3
1
10
100
FREQUENCY – MHz
1000
TPC 9. Off Isolation vs. Frequency
–8–
REV. 0
ADG604
Test Circuits
IDS
V1
IS (OFF)
S
VS
D
ID (OFF)
S
A
D
VDD
0.1F
VS1
S1
A1
A0
VS
ADDRESS
DRIVE (VIN)
VSS
VDD
S2
S3
S4
VS2
3V
50%
90%
90%
tTRANSITION
VOUT
RL
300
EN
GND
50%
0V
VOUT
D
+2.4V
tTRANSITION
CL
35pF
Test Circuit 4. Switching Time of Multiplexer, tTRANSITION
VDD
VSS
0.1F
0.1F
VSS
VDD
VS
50
VS
S1
A1
A0
S2
S3
S4
VOUT
D
RL
300
EN
+2.4V
GND
ADDRESS
DRIVE (VIN)
3V
0V
VOUT
80%
80%
CL
35pF
tBBM
Test Circuit 5. Break-Before-Make Delay, tBBM
VDD
VSS
0.1F
0.1F
VDD
ENABLE
DRIVE (VIN)
VSS
S1
A1
A0
VS
50%
50%
0V
V0
S4
OUTPUT
0.9V0
VOUT
D
50
GND
RL
300
CL
35pF
tON(EN)
Test Circuit 6. Enable Delay, tON (EN), tOFF (EN)
REV. 0
0.9V0
0V
EN
VS
3V
S2
S3
–9–
A
Test Circuit 3. On Leakage
VSS
0.1F
D
VD
Test Circuit 2. Off Leakage
Test Circuit 1. On Resistance
S
NC
VD
VS
RON = V1/IDS
ID (ON)
A
tOFF(EN)
ADG604
VDD
VSS
VOUT
RS
VDD
VSS
S
D
VOUT
QINJ = CL VOUT
VOUT
VIN
CL
1nF
VS
SW OFF
SW OFF
SW ON
DECODER
GND
SW
SWON
ON
VIN
A1 A2
EN
SW OFF
SW OFF
CHARGE INJECTION = VOUT CL
Test Circuit 7. Charge Injection
VDD
VSS
0.1F
VDD
0.1F
VDD
NETWORK
ANALYZER
VSS
S
50
NETWORK
ANALYZER
50
GND
VSS
D
S2
VOUT
R
50
50
VS
OFF ISOLATION = 20 LOG
VDD
RL
50
VS
RL
50
0.1F
S1
VOUT
D
GND
CHANNEL-TO-CHANNEL CROSSTALK = 20 LOG
VOUT
VS
Test Circuit 8. Off Isolation
VDD
VSS
0.1F
VOUT
VS
Test Circuit 10. Channel-to-Channel Crosstalk
VSS
0.1F
0.1F
VDD
VSS
S
NETWORK
ANALYZER
50
VS
D
GND
INSERTION LOSS = 20 LOG
RL
50
VOUT
VOUT WITH SWITCH
VOUT WITHOUT SWITCH
Test Circuit 9. Bandwidth
–10–
REV. 0
ADG604
OUTLINE DIMENSIONS
Dimensions shown in inches and (mm).
14-Lead TSSOP Package
(RU-14)
0.201 (5.10)
0.193 (4.90)
14
8
0.177 (4.50)
0.169 (4.30)
0.256 (6.50)
0.246 (6.25)
1
7
PIN 1
0.006 (0.15)
0.002 (0.05)
SEATING
PLANE
REV. 0
0.0256
(0.65)
BSC
0.0433 (1.10)
MAX
0.0118 (0.30)
0.0075 (0.19)
0.0079 (0.20)
0.0035 (0.090)
–11–
8
0
0.028 (0.70)
0.020 (0.50)
–12–
PRINTED IN U.S.A.
C02752–0–2/02(0)