JDSU AHC-S03

COMMUNICATIONS COMPONENTS
Amplifier Hybrid with Thin Film Coupler and Isolator
AHC Series
Key Features
• Multifunction device: isolation, pump multiplexing
and/or tap
• Wide wavelength flatness over signal/pump
wavelength range
• High power handling
• High reliability
• Compact design
• High WDM/isolator isolation
Applications
• EDFA
• Raman amplifiers
• Other custom configurations
(integrated modules) such as optical
supervisory channel (OSC) at
1510 nm and 1625 nm
Dimensions Diagram
This device is a combination of a polarization independent optical isolator, and
either a WDM filter or tap coupler. These devices are ideal for high power applications.
The AHC Series Integrated Component has extremely low polarization sensitivity,
low insertion loss and high isolation for both WDM filter and isolators. Designed
for compact and easy installation, it eliminates splices, requires less fiber routing
and reduces losses when compared to discrete components.
Its high performance provides exceptionally stable signal isolation and wavelength
division multiplexing over wide wavelength/temperature ranges and all
polarization states. It is ideal for fiber amplifier and WDM network applications.
(Specifications in mm unless otherwise noted.)
Ø5.5
Ø5.5
C
C
P
R
P
Forward Pump
Backward Pump/Tap
NORTH AMERICA : 800 498-JDSU (5378)
R
32 or 40
32 or 40
WORLDWIDE : +800 5378-JDSU
WEBSITE : www.jdsu.com
AHC SERIES
2
980/1550 nm Model: 1550 Channel
40
40
35
35
30
30
Loss (dB)
Loss (dB)
980/1550 nm Model: 980 Channel
25
20
15
25
20
15
10
10
5
5
0
0
0.9
1.1
1.3
0.9
1.5
1.1
1.3
1.5
Wavelength (nm)
Wavelength (nm)
1480/1550 nm Model: 1480 Channel
1480/1550 nm Model: 1550 Channel
40
28
Loss (dB)
Loss (dB)
35
24
20
16
12
8
30
25
20
15
10
4
5
0
1.4 1.42 1.44 1.46 1.48 1.5 1.52 1.54 1.56 1.58 1.6
0
1.4 1.42 1.44 1.46 1.48 1.5 1.52 1.54 1.56 1.58 1.6
Wavelength (nm)
Wavelength (nm)
Tap Ratio and Insertion Loss Table
Code
Tap
Ratio
One-Stage Isolator
C to P
Insertion Loss
One-Stage Isolator
C to R
Insertion Loss
Two-Stage Isolator
C to P
Insertion Loss
Two-Stage Isolator
C to R
Insertion Loss
1
2
3
4
5
A
T
1%
2%
3%
4%
5%
1.8%
10%
0.6 dB Max.
0.6 dB Max.
0.7 dB Max.
0.7 dB Max.
0.8 dB Max.
0.6 dB Max.
1.0 dB Max.
20±1 dB
17±1 dB
15±1 dB
14±1 dB
13±1 dB
17.5±1 dB
10±1 dB
0.7 dB Max.
0.7 dB Max.
0.8 dB Max.
0.8 dB Max.
0.9 dB Max.
0.7 dB Max.
1.1 dB Max.
20±1 dB
17±1 dB
15±1 dB
14±1 dB
13±1 dB
17.5±1 dB
10±1 dB
AHC SERIES
3
Specifications
Parameter
Tap and
One-Stage
Isolator
Tap and
Two-Stage
Isolator
Signal central wavelength, λC
C, L or S
C, L or S
Signal wavelength range, λS
C, L or S
Pump channel
wavelength range, λP
Port configuration
N/A
Insertion loss at λS (note3)
Max.
Wavelength dependent
Max.
variation at λS and
C, L, or S bands (note3)
Wavelength dependent
Max.
variation at λS and
C+L band (note3)
PDL at λS (note3)
Max.
PMD at λS (note3)
Max.
Isolation of isolator
Min.
at λS (note4)
Isolation of WDM
Min.
at λP (note5)
Insertion loss (C to R) at λP
Max.
PDL (C to R) at λP
Max.
Directivity (P to R) at λS
Min.
Directivity (R to P) at λP
Min.
Optical return loss
Min.
Maximum optical
power (standard)
Maximum optical power
(high power option)
Tensile load
Max.
Operating temperature
Storage temperature
Package dimensions (D x L)
Fiber type
Pigtail color code (bare fiber)
Pigtail color code (loose tube)
Device marking
1480 WDM
1480 WDM
980 WDM
980 WDM
and One-Stage and Two-Stage and One-Stage and Two-Stage
Isolator
Isolator
Isolator
Isolator
C, L or 1
C, L or 1
C, L or 1
C, L or 1
(C=1550 nm, L=1590 nm, 1=1570 nm, S=1510 nm)
C, L or S
C, L or 1
C, L or 1
C, L or 1
C, L or 1
(C=1530 to 1580 nm, L=1590±20 nm, 1=C+L=1530 to 1610nm, S=1490 to 1530 nm)
N/A
1465 to 1495 nm 1465 to 1495 nm 950 to 1010 nm
950 to 1010 nm
Backward
(note1)
Backward
(note1)
Forward or
backward
(note2)
See table on page 2 See table on page 2 0.5 dB
0.2 dB
0.2 dB
0.15 dB
Forward or
backward
(note2)
0.6 dB
0.2 dB
Forward or
backward
(note2)
0.6 dB
0.15 dB
Forward or
backward
(note2)
0.7 dB
0.2 dB
NA
NA
0.25 dB
0.3 dB
0.25 dB
0.3 dB
0.1 dB
0.05 ps
30 dB
0.2 dB
0.05 ps
42 dB
0.06 dB
0.05 ps
30 dB
0.08 dB
0.05 ps
45 dB
0.06 dB
0.05 ps
30 dB
0.08 dB
0.05 ps
45 dB
N/A
N/A
30 dB
30 dB
30 dB
30 dB
See table on page 2
0.05 dB
60 dB
N/A
50 dB
500 mW
See table on page 2
0.05 dB
60 dB
N/A
50 dB
500 mW
0.4 dB
0.05 dB
60 dB
60 dB
50 dB
500 mW
0.4 dB
0.05 dB
60 dB
60 dB
50 dB
500 mW
0.6 dB
0.1 dB
60 dB
60 dB
50 dB
150 mW
0.6 dB
0.1 dB
60 dB
60 dB
50 dB
150 mW
2000 mW
2000 mW
2000 mW
2000 mW
450 mW
450 mW
5N
5N
5N
5N
5N
5N
-5 to 70 °C
-40 to 85 °C
5.5 mm x 32 mm for bare fiber and 5.5 mm x 40 mm for bare fiber or loose tube
PureMode Hi 1060 for ports transmitting 980 nm (standard), SMF-28 for all others (standard)
Black (C port); Clear (R & P ports)
Red (C port); Blue (R & P ports)
JDSU logo, JDSU model name and device serial number
Note: Parameters are specified for the signal wavelength range and/or pump wavelength range, all polarization states and operating temperature range without connector.
1
2.
3.
4.
5.
Backward tap: C (input), R (tap) and P (output).
Backward pumped: C (λS input and λP output), R (λP input) and P (λS output). Forward pumped: C (λS and λP output), R (λP input) and P (λS input).
Forward: P to C and Backward: C to P.
Forward: C to P and Backward: P to C. The isolation data are specified at 23 °C. The isolation range is λc ± 12 nm or λc ± 30 nm for one-stage or two-stage isolator, respectively.
Isolation of WDM is given for both C to P and P to C directions.
AHC SERIES
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
[email protected].
Sample: AHC-C30R10000
AHCCode
C
L
S
1
Signal Wavelength
C-band
L-band
S-band
C+L-bands
Code
0
3
5
Pump Wavelength
No pump option
1480 nm
980 nm
Code
0
1
2
3
4
5
A
T
Tap Ratio
No tap option
1%
2%
3%
4%
5%
1.8%
10%
0
Code
J
K
N
Q
R
S
V
Z
Isolator, Pump Configuration,
Package Length
One-stage, forward-pumped,
32 mm (L)
One-stage, forward-pumped,
40 mm (L)
One-stage, backward-pumped or tap,
32 mm (L)
One-stage, backward-pumped or tap,
40 mm (L)
Two-stage, forward-pumped,
40 mm (L)
Two-stage, forward-pumped,
32 mm (L)
Two-stage, backward-pumped
(or tap), 40 mm (L)
Two-stage, backward-pumped
(or tap), 32 mm (L)
Code
1
2
4
5
Fiber Pigtail Length
1 meter
2 meters
0.5 meter
1.5 meters
Code
0
1
Fiber Buffer Type
250 µm bare fiber
900 µm loose tube
Code
0
Power Handling Option
Standard: 150 mW at
980 nm and 500 mW for
all others
High Power: 450 mW at
980 nm and 2000 mW
for all others
H
Code
0
1
2
3
4
5
8
9
A
B
C
Connectors
No connector
FC/PC
FC/SPC
FC/APC
SC/SPC
SC/APC
ST
FC/UPC
SC/UPC
LC/SPC
LC/UPC
Note: Other configuratons and wavelengths are available on custom basis.
SMF-28 and PureMode are registered trademarks of Corning Incorporated.
ST and LC are registered trademarks of Lucent Technologies.
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including
withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2006 JDS Uniphase
Corporation. All rights reserved. 10134045 Rev. 004 02/06 AHC.DS.CC.AE
NORTH AMERICA : 800 498-JDSU (5378)
WORLDWIDE : +800 5378-JDSU
WEBSITE : www.jdsu.com