3.2mmx3.6mm FULL-COLOR SURFACE MOUNT LED LAMP Part Number: APF3236SURKMGKPBA PRELIMINARY SPEC HYPER RED ATTENTION MEGA GREEN OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features zLOW Description The Hyper Red source color devices are made with DH POWER CONSUMPTION. z3.2mmx3.6mm zONE SMT LED, 1.1mm THICKNESS. RED, ONE GREEN AND ONE BLUE CHIPS IN ONE PACKAGE. zCAN INCLUDING WHITE LIGHT. zRoHS The Mega Green source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Light Emitting Diode. Static electricity and surge damage the LEDS. : 1000PCS / REEL. zMOISTURE InGaAlP on GaAs substrate Light Emitting Diode. The Blue source color devices are made with InGaN on SiC PRODUCE ANY COLOR IN VISIBLE SPECTRUM, zPACKAGE BLUE It is recommended to use a wrist band or anti-electrostatic SENSITIVITY LEVEL : LEVEL 3. glove when handling the LEDs. All devices, equipment and machinery must be electrically COMPLIANT. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subjected to change without notice. SPEC NO: DSAG5708 REV NO: V.1 DATE: JUN/20/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG PAGE: 1 OF 7 ERP: 1203005708 Selection Guide Dice Part No. Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 70 150 18 60 18 60 HYPER RED (InGaAlP) APF3236SURKMGKPBA MEGA GREEN (InGaAIP) WATER CLEAR BLUE (InGaN) Viewing Angle [1] 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Hyper Red Mega Green Blue λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 650 574 468 nm IF=20mA Hyper Red Mega Green Blue 635 570 470 nm IF=20mA Spectral Line Half-width Hyper Red Mega Green Blue 28 20 21 nm IF=20mA C Capacitance Hyper Red Mega Green Blue 35 15 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Mega Green Blue 1.95 2.1 3.3 2.5 2.5 3.8 V IF=20mA IR Reverse Current Hyper Red Mega Green Blue 10 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Mega Green Blue Units Power dissipation 75 75 114 mW DC Forward Current 30 30 30 mA Peak Forward Current [1] 185 150 100 mA Reverse Voltage 5 Operating/Storage Temperature V -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5708 REV NO: V.1 DATE: JUN/20/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG PAGE: 2 OF 7 ERP: 1203005708 APF3236SURKMGKPBA Hyper Red SPEC NO: DSAG5708 REV NO: V.1 DATE: JUN/20/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG PAGE: 3 OF 7 ERP: 1203005708 Mega Green SPEC NO: DSAG5708 REV NO: V.1 DATE: JUN/20/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG PAGE: 4 OF 7 ERP: 1203005708 Blue SPEC NO: DSAG5708 REV NO: V.1 DATE: JUN/20/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG PAGE: 5 OF 7 ERP: 1203005708 APF3236SURKMGKPBA Recommended Soldering Pattern (Units: mm ; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5708 REV NO: V.1 DATE: JUN/20/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG PAGE: 6 OF 7 ERP: 1203005708 PACKING & LABEL SPECIFICATIONS APF3236SURKMGKPBA SPEC NO: DSAG5708 REV NO: V.1 DATE: JUN/20/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG PAGE: 7 OF 7 ERP: 1203005708