ARIZONA MICROTEK, INC. AZ10LVEL33 AZ100LVEL33 ECL/PECL ÷4 Divider PACKAGE AVAILABILITY FEATURES • • • • • • • • PACKAGE Green / RoHS Compliant / Lead (Pb) Free package available Operating Range of 3.0V to 5.5V 470ps Propagation Delay 4.0GHz Toggle Frequency Internal Input Pulldown Resistors Direct Replacement for ON Semiconductor MC10EL33, MC100EL33, and MC100LVEL33 Transistor Count = 91 Devices IBIS Model Files Available on Arizona Microtek Web Site PART NUMBER MLP 8 (2x2) Green / RoHS Compliant / Lead (Pb) Free AZ100LVEL33NG MLP 16 (3x3) AZ10/100LVEL33L SOIC 8 AZ10LVEL33D SOIC 8 AZ100LVEL33D TSSOP 8 AZ10LVEL33T TSSOP 8 AZ100LVEL33T 1 2 3 MARKING NOTES C3G <Date Code> 1,2 AZM L33 <Date Code> AZM10 LVEL33 AZM100 LVEL33 AZT LV33 AZH LV33 1,2 1,2,3 1,2,3 1,2,3 1,2,3 Add R1 at end of part number for 7 inch (1K parts), R2 for 13 inch (2.5K parts) Tape & Reel. Date code format: “Y” or “YY” for year followed by “WW” for week. Date code “YWW” or “YYWW” on underside of part. DESCRIPTION The AZ10/100LVEL33 is an integrated ÷4 divider. The RESET pin is asynchronous and clears the output (Q Low, Q ¯ High) on the rising edge. Upon power-up, the internal flip-flop will be in a random logic state. RESET allows for the synchronization of multiple LVEL33’s in a system. The LVEL33 provides a VBB output for single-end use or a DC bias reference for AC coupling to the device. For single-ended input applications, the VBB reference should be connected to one side of the CLK/ CLK ¯¯¯¯ differential input pair. The input signal is then fed to the other CLK/ CLK ¯¯¯¯ input. The VBB pin can support 1.0mA sink/source current. When used, the VBB pin should be bypassed to ground via a 0.01μF capacitor. NOTE: Specifications in the ECL/PECL tables are valid when thermal equilibrium is established. LOGIC DIAGRAM PIN DESCRIPTION PIN CLK, CLK ¯¯¯ RESET VBB Q, Q ¯ VCC VEE FUNCTION Clock Inputs Asynchronous Reset Reference Voltage Output Data Outputs Positive Supply Negative Supply RESET R Q ÷4 CLK CLK Q VBB 1630 S. STAPLEY DR., SUITE 127 • MESA, ARIZONA 85204 • USA • (480) 962-5881 • FAX (480) 890-2541 www.azmicrotek.com AZ10LVEL33 AZ100LVEL33 Absolute Maximum Ratings are those values beyond which device life may be impaired. Symbol VCC VI VEE VI IOUT TA TSTG Characteristic PECL Power Supply (VEE = 0V) PECL Input Voltage (VEE = 0V) ECL Power Supply (VCC = 0V) ECL Input Voltage (VCC = 0V) Output Current --- Continuous --- Surge Operating Temperature Range Storage Temperature Range Rating 0 to +8.0 0 to +6.0 -8.0 to 0 -6.0 to 0 50 100 -40 to +85 -65 to +150 Unit Vdc Vdc Vdc Vdc mA °C °C 10K ECL DC Characteristics (VEE = -3.0V to -5.5V, VCC = GND) Symbol VOH VOL VIH VIL VBB IIH IIL IEE 1. Characteristic 1 Min -1080 -1950 -1230 -1950 -1430 -40°C Typ Max -890 -1650 -890 -1500 -1300 150 Output HIGH Voltage Output LOW Voltage1 Input HIGH Voltage Input LOW Voltage Reference Voltage Input HIGH Current Input LOW Current CLK, CLK ¯¯¯ -150 RESET 0.5 Power Supply Current 27 33 Each output is terminated through a 50Ω resistor to VCC – 2V. Min -1020 -1950 -1170 -1950 -1380 0°C Typ Max -840 -1630 -840 -1480 -1270 150 -150 0.5 Min -980 -1950 -1130 -1950 -1350 25°C Typ Max -810 -1630 -810 -1480 -1250 150 -150 0.5 27 33 Min -910 -1950 -1060 -1950 -1310 85°C Typ Max -720 -1595 -720 -1445 -1190 150 33 mV mV mV mV mV μA μA -150 0.5 27 Unit 27 33 mA 10K LVPECL DC Characteristics (VEE = GND, VCC = +3.3V) Symbol VOH VOL VIH VIL VBB IIH IIL IEE 1. 2. Characteristic 1,2 Min 2220 1350 2070 1350 1870 -40°C Typ Max 2410 1650 2410 1800 2000 150 Min 2280 1350 2130 1350 1920 0°C Typ Max 2460 1670 2460 1820 2030 150 Min 2320 1350 2170 1350 1950 Output HIGH Voltage Output LOW Voltage1,2 Input HIGH Voltage1 Input LOW Voltage1 Reference Voltage1 Input HIGH Current Input LOW Current CLK, CLK ¯¯¯ -150 -150 -150 RESET 0.5 0.5 0.5 Power Supply Current 27 33 27 33 For supply voltages other that 3.3V, use the ECL table values and ADD supply voltage value. Each output is terminated through a 50Ω resistor to VCC – 2V. 25°C Typ Max 2490 1670 2490 1820 2050 150 Min 2390 1350 2240 1350 1990 85°C Typ Max 2580 1705 2580 1855 2110 150 33 mV mV mV mV mV μA μA -150 0.5 27 Unit 27 33 mA 10K PECL DC Characteristics (VEE = GND, VCC = +5.0V) Symbol VOH VOL VIH VIL VBB IIH IIL IEE 1. 2. Characteristic 1,2 Min 3920 3050 3770 3050 3570 -40°C Typ Max 4110 3350 4110 3500 3700 150 Min 3980 3050 3830 3050 3620 0°C Typ Max 4160 3370 4160 3520 3730 150 Min 4020 3050 3870 3050 3650 Output HIGH Voltage Output LOW Voltage1,2 Input HIGH Voltage1 Input LOW Voltage1 Reference Voltage1 Input HIGH Current Input LOW Current CLK, CLK ¯¯¯ -150 -150 -150 RESET 0.5 0.5 0.5 Power Supply Current 27 33 27 33 For supply voltages other that 5.0V, use the ECL table values and ADD supply voltage value. Each output is terminated through a 50Ω resistor to VCC – 2V. April 2007 * REV - 9 www.azmicrotek.com 2 25°C Typ Max 4190 3370 4190 3520 3750 150 Min 4090 3050 3940 3050 3690 85°C Typ Max 4280 3405 4280 3555 3810 150 33 mV mV mV mV mV μA μA -150 0.5 27 Unit 27 33 mA AZ10LVEL33 AZ100LVEL33 100K ECL DC Characteristics (VEE = -3.0V to -5.5V, VCC = GND) Symbol VOH VOL VIH VIL VBB IIH IIL IEE 1. Characteristic 1 Min -1085 -1830 -1165 -1810 -1380 -40°C Typ -1005 -1695 Max -880 -1555 -880 -1475 -1260 150 Output HIGH Voltage Output LOW Voltage1 Input HIGH Voltage Input LOW Voltage Reference Voltage Input HIGH Current Input LOW Current CLK, CLK ¯¯¯ -150 RESET 0.5 Power Supply Current 27 33 Each output is terminated through a 50Ω resistor to VCC – 2V. Min -1025 -1810 -1165 -1810 -1380 0°C Typ -955 -1705 Max -880 -1620 -880 -1475 -1260 150 -150 0.5 Min -1025 -1810 -1165 -1810 -1380 25°C Typ -955 -1705 Max -880 -1620 -880 -1475 -1260 150 -150 0.5 27 33 Min -1025 -1810 -1165 -1810 -1380 85°C Typ -955 -1705 Max -880 -1620 -880 -1475 -1260 150 33 mV mV mV mV mV μA μA -150 0.5 27 Unit 31 37 mA 100K LVPECL DC Characteristics (VEE = GND, VCC = +3.3V) Symbol VOH VOL VIH VIL VBB IIH IIL IEE 1. 2. Characteristic 1,2 Min 2215 1470 2135 1490 1920 -40°C Typ 2295 1605 Max 2420 1745 2420 1825 2040 150 Min 2275 1490 2135 1490 1920 0°C Typ 2345 1595 Max 2420 1680 2420 1825 2040 150 Min 2275 1490 2135 1490 1920 Output HIGH Voltage Output LOW Voltage1,2 Input HIGH Voltage1 Input LOW Voltage1 Reference Voltage1 Input HIGH Current Input LOW Current CLK, CLK ¯¯¯ -150 -150 -150 RESET 0.5 0.5 0.5 Power Supply Current 27 33 27 33 For supply voltages other that 3.3V, use the ECL table values and ADD supply voltage value. Each output is terminated through a 50Ω resistor to VCC – 2V. 25°C Typ 2345 1595 Max 2420 1680 2420 1825 2040 150 Min 2275 1490 2135 1490 1920 85°C Typ 2345 1595 Max 2420 1680 2420 1825 2040 150 33 mV mV mV mV mV μA μA -150 0.5 27 Unit 31 37 mA 100K PECL DC Characteristics (VEE = GND, VCC = +5.0V) Symbol VOH VOL VIH VIL VBB IIH IIL IEE 1. 2. Characteristic 1,2 Min 3915 3170 3835 3190 3620 -40°C Typ 3995 3305 Max 4120 3445 4120 3525 3740 150 Min 3975 3190 3835 3190 3620 0°C Typ 4045 3295 Max 4120 3380 4120 3525 3740 150 Min 3975 3190 3835 3190 3620 Output HIGH Voltage Output LOW Voltage1,2 Input HIGH Voltage1 Input LOW Voltage1 Reference Voltage1 Input HIGH Current Input LOW Current CLK, CLK ¯¯¯ -150 -150 -150 RESET 0.5 0.5 0.5 Power Supply Current 27 33 27 33 For supply voltages other that 5.0V, use the ECL table values and ADD supply voltage value. Each output is terminated through a 50Ω resistor to VCC – 2V. April 2007 * REV - 9 www.azmicrotek.com 3 25°C Typ 4045 3295 Max 4120 3380 4120 3525 3740 150 Min 3975 3190 3835 3190 3620 85°C Typ 4045 3295 Max 4120 3380 4120 3525 3740 150 33 mV mV mV mV mV μA μA -150 0.5 27 Unit 31 37 mA AZ10LVEL33 AZ100LVEL33 AC Characteristics (VEE = -3.0V to -5.5V; VCC = GND or VEE = GND; VCC = +3.0V to +5.5V) Symbol Characteristic tRR Maximum Toggle Frequency Propagation Delay CLK, CLK ¯¯¯ to Q/Q ¯ RESET to Q/Q ¯ Reset Recovery tskew Within-Device Skew fmax tPLH / tPHL Min -40°C Typ 3.4 4.0 360 310 300 450 460 Max 540 610 Min 0°C Typ 3.8 4.0 320 340 300 460 460 20 Max 550 580 20 Min 25°C Typ 3.8 4.0 380 360 300 470 460 Max 560 560 20 Min 85°C Typ 3.8 4.0 400 380 300 490 480 Max GHz 580 580 CLK RESET Q Figure 1. Timing Diagram April 2007 * REV - 9 www.azmicrotek.com 4 ps ps 20 Input Swing1 150 1000 150 1000 150 1000 150 1000 Common Mode Range2 VCC VEE + VCC VEE + VCC VEE + VCC VEE + 1.2 0.4 1.1 0.4 1.1 0.4 1.1 0.4 VCMR Vpp < 500mV 1.4 0.4 1.3 0.4 1.3 0.4 1.3 0.4 Vpp ≥ 500mV Output Rise/Fall Times tr / t f 100 260 100 260 100 260 100 260 Q/Q ¯ (20% - 80%) 1. VPP is the peak-to-peak differential input swing for which AC parameters are guaranteed. 2. VCMR is defined as the range within which the VIH level may vary, with the device still meeting the propagation delay specification. The VIL level must be such that VPP is within the differential input swing range specified. VPP (AC) Unit ps mV V ps AZ10LVEL33 AZ100LVEL33 PACKAGE PINOUTS TOP VIEW AZ10/100LVEL33L AZ100LVEL33N RESET NC NC VCC 16 15 14 13 NC 1 12 NC CLK 2 11 MLP16 RESET 1 8 VCC Q CLK 2 7 Q CLK 3 6 Q VBB 4 5 VEE CLK 3 10 Q VBB 4 9 NC 5 6 7 8 NC NC VEE 10K 100K Mode: Leave the 10K pin open (NC) 10K Mode: Connect the 10K pin to VEE Bottom Center Pad may be left open or tied to VEE. Bottom Center Pad may be left open or tied to VEE. AZ10LVEL33D AZ100LVEL33D AZ10LVEL33T AZ100LVEL33T RESET 1 CLK 2 CLK 3 VBB 4 April 2007 * REV - 9 SOIC 8 TSSOP 8 8 VCC 7 Q 6 Q 5 VEE MLP 8 www.azmicrotek.com 5 AZ10LVEL33 AZ100LVEL33 PACKAGE DIAGRAM SOIC 8 NOTES: 1. DIMENSIONS D AND E DO NOT INCLUDE MOLD PROTRUSION. 2. MAXIMUM MOLD PROTRUSION FOR D IS 0.15mm. 3. MAXIMUM MOLD PROTRUSION FOR E IS 0.25mm. April 2007 * REV - 9 DIM A A1 A2 A3 bp c D E e HE L Lp Q v w y Z θ www.azmicrotek.com 6 MILLIMETERS MIN MAX 1.75 0.10 0.25 1.25 1.45 0.25 0.36 0.49 0.19 0.25 4.8 5.0 3.8 4.0 1.27 5.80 6.20 1.05 0.40 1.00 0.60 0.70 0.25 0.25 0.10 0.30 0.70 8O 0O INCHES MIN MAX 0.069 0.004 0.010 0.049 0.057 0.01 0.014 0.019 0.0075 0.0100 0.19 0.20 0.15 0.16 0.050 0.228 0.244 0.041 0.016 0.039 0.024 0.028 0.01 0.01 0.004 0.012 0.028 0O 8O AZ10LVEL33 AZ100LVEL33 PACKAGE DIAGRAM TSSOP 8 DIM A A1 A2 A3 bp c D E e HE L Lp v w y Z θ NOTES: 1. DIMENSIONS D AND E DO NOT INCLUDE MOLD PROTRUSION. 2. MAXIMUM MOLD PROTRUSION FOR D IS 0.15mm. 3. MAXIMUM MOLD PROTRUSION FOR E IS 0.25mm. April 2007 * REV - 9 www.azmicrotek.com 7 MILLIMETERS MIN MAX 1.10 0.05 0.15 0.80 0.95 0.25 0.25 0.45 0.15 0.28 2.90 3.10 2.90 3.10 0.65 4.70 5.10 0.94 0.40 0.70 0.10 0.10 0.10 0.35 0.70 6O 0O AZ10LVEL33 AZ100LVEL33 PACKAGE DIAGRAM MLP 16 A D D 2 2. INDEX AREA (D/2 x E/2) D2 D2/2 B E2/2 E2 E 2 3x E e 2 e 2x 1 aaa C 2x aaa C TOP VIEW bbb M C A B 5. 16 x b L 3. 3x e BOTTOM VIEW ccc C A3 A 4. 0.08 C A1 SIDE VIEW C SEATING PLANE MILLIMETERS NOTES: 1. DIMENSIONING AND TOLERANCING CONFORM TO ASME T14-1994. 2. THE TERMINAL #1 AND PAD NUMBERING CONVENTION SHALL CONFORM TO JESD 95-1 SPP-012. 3. DIMENSION b APPLIES TO METALLIZED PAD AND IS MEASURED BETWEEN 0.25 AND 0.30 mm FROM PAD TIP. 4. COPLANARITY APPLIES TO THE EXPOSED PADS AS WELL AS THE TERMINALS. 5. INSIDE CORNERS OF METALLIZED PAD MAY BE SQUARE OR ROUNDED April 2007 * REV - 9 www.azmicrotek.com 8 DIM A A1 A3 b D D2 E E2 e L aaa bbb ccc MIN MAX 1.00 0.80 0.05 0.00 0.25 REF 0.30 0.18 3.10 2.90 1.95 0.25 3.10 2.90 1.95 0.25 0.50 BSC 0.30 0.50 0.25 0.10 0.10 AZ10LVEL33 AZ100LVEL33 PACKAGE DIAGRAM MLP 8 2x2mm Pin 1 Dot By Marking 2.000±0.050 MLP 8 (2x2mm) 2.000±0.050 TOP VIEW Pin 1 Identification R0.100 TYP 0.350±0.050 0.250±0.050 0.500 bsc 8 1 7 6 2 1.200±0.050 exp. pad 3 5 4 0.600±0.050 exp. pad BOTTOM VIEW 0.750±0.050 0.000-0.050 1 2 SIDE VIEW Note: All dimensions are in mm April 2007 * REV - 9 www.azmicrotek.com 9 3 4 0.203±0.025 1.750 Ref. AZ10LVEL33 AZ100LVEL33 Arizona Microtek, Inc. reserves the right to change circuitry and specifications at any time without prior notice. Arizona Microtek, Inc. makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Arizona Microtek, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Arizona Microtek, Inc. does not convey any license rights nor the rights of others. Arizona Microtek, Inc. products are not designed, intended or authorized for use as components in systems intended to support or sustain life, or for any other application in which the failure of the Arizona Microtek, Inc. product could create a situation where personal injury or death may occur. Should Buyer purchase or use Arizona Microtek, Inc. products for any such unintended or unauthorized application, Buyer shall indemnify and hold Arizona Microtek, Inc. and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Arizona Microtek, Inc. was negligent regarding the design or manufacture of the part. April 2007 * REV - 9 www.azmicrotek.com 10