Preliminary Data Sheet 3.0 Amp Glass Passivated Sintered Rectifiers Mechanical Dimensions Description GFZ3A . . . 3M Series 6.60/7.11 Package SMC 5.59/6.10 7.75/8.12 .15/.30 .171 1.91/2.41 .051/.152 Features n LOWEST COST FOR GLASS SINTERED CONSTRUCTION n 3.0 AMP OPERATION @ TA = 100°C, WITH NO THERMAL RUNAWAY n LOWEST VF FOR GLASS SINTERED CONSTRUCTION n SINTERED GLASS CAVITY-FREE JUNCTION n TYPICAL IR < 100 nAmps Electrical Characteristics @ 25 o C. Maximum Ratings Units GFZ3A . . . 3M Series 3A 3B 3D 3G 3J 3K 3M 100 200 400 600 800 1000 Volts Peak Repetitive Reverse Voltage...VRRM 50 RMS Reverse Voltage...VR(rms) 35 70 140 280 420 560 700 Volts DC Blocking Voltage...VDC 50 100 200 400 600 800 1000 Volts Average Forward Rectified Current...IF(av) @ TA = 100°C (Note 2) ............................................. 3.0 ............................................... Amps Non-Repetitive Peak Forward Surge Current...IFSM 8.3mS, ½ Sine Wave Superimposed on Rated Load ............................................. 1 2 5 ............................................... Amps Forward Voltage @ 3.0A...VF < ...... 1.1 ...... > < ............................. 1.0 ........................... > Volts Full Load Reverse Current...IR(av) Full Cycle Average @ TA = 100°C ............................................. 1 0 0 ............................................... µAmps ............................................. 5.0 ............................................... ............................................. 2 0 0 ............................................... µAmps Typical Junction Capacitance...CJ (Note 1) ............................................. 4 0 ............................................... pF Typical Thermal Resistance...RθJA (Note 2) ............................................. 1 5 ............................................... °C / W Typical Reverse Recovery Time...tRR (Note 3) ............................................. 2.0 ............................................... µS Operating & Storage Temperature Range...TJ, TSTRG ......................................... -65 to 175 .......................................... °C DC Reverse Current...IR(max) @ Rated DC Blocking Voltage T A = 25°C TA = 150°C Preliminary Data Sheet 3.0 Amp Glass Passivated Sintered Rectifiers A T Amps D Glass G d D 126 TL = Lead Temperature (°°C) d G 86 2+0.5 T 11 A 15+1 Typical Junction Capacitance Non-Repetitive Peak Forward Surge Current TJ = 25°°C f = 1.0 MHZ VSIG = 50mVp-p Amps pF TJ = TJ max. 8.3 mS Single Half Sine Wave (Jedec Method) GFZ3A . . . 3M Series Die Dimension (mils) Forward Current Derating Curve Number of Cycles @ 60 HZ Reverse Voltage (Volts) Typical Instantaneous Forward Characteristics Typical Reverse Characteristics TJ = 125°°C Amps µ Amps TJ = 75°°C TJ = 25°°C Volts Percent of Rated Peak Voltage NOTES: 1. Measured @ 1 MHZ and applied reverse voltage of 4.0V. 2. 8.0mm2 (.013mm thick) land areas. 3. Reverse Recovery Condition IF = 0.5A, IR = 1.0A, IRR = 0.25A. Ratings at 25 Deg. C ambient temperature unless otherwise specified. Single Phase Half Wave, 60 HZ Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%.