1.0 Amp MEGARECTIFIERS 1N4001GP . . . 7GP Series Data Sheet Mechanical Dimensions Description JEDEC D0-41 .205 .160 1.00 Min. .080 .107 .031 typ. Features n CAPABILITY OF MEETING ENVIRONMENTAL STANDARDS OF MIL-S-19500 n HIGH TEMPERATURE METALLURGICALLY BONDED CONSTRUCTION n SINTERED GLASS CAVITY-FREE JUNCTION Electrical Characteristics @ 25 oC. 1N4001GP . . . 7GP Series Maximum Ratings 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 GP GP GP GP GP GP GP Units Peak Repetitive Reverse Voltage...VRRM 50 100 200 400 600 800 1000 Volts RMS Reverse Voltage...VR(rms) 35 70 140 280 420 560 700 Volts DC Blocking Voltage...VDC 50 100 200 400 600 800 1000 Volts Average Forward Rectified Current...IF(av) Current 3/8" Lead Length @ TA = 75°C ............................................. 1.0 ............................................... Amps Non-Repetitive Peak Forward Surge Current...IFSM ½ Sine Wave Superimposed on Rated Load ............................................. 3 0 ............................................... Amps Forward Voltage @ 1.0A...VF ............................................. 1.1 ............................................... Volts Full Load Reverse Current...IR(av) Full Cycle Average @ TA = 75°C ............................................. 3 0 ............................................... µAmps ............................................. 5 ............................................... ............................................. 5 0 ............................................... µAmps µAmps Typical Junction Capacitance...CJ (Note 1) ............................................. 8.0 ............................................... pF Typical Thermal Resistance...RθJA (Note 2) ............................................. 4 5 ............................................... °C / W Typical Reverse Recovery Time...tRR (Note 3) ......................................... .......................................... µS Operating & Storage Temperature Range...TJ, TSTRG ......................................... -65 to 175 .......................................... °C DC Reverse Current...IR @ Rated DC Blocking Voltage Page 6-4 TA = 25°C TA = 125°C 2.0 Forward Current Derating Curve Amps 60 Hz RESISTIVE OR INDUCTIVE LOAD 0.375″″ (9.5mm) LEAD LENGTH TA = Ambient Temperature (°°C) Typical Junction Capacitance Non-Repetitive Peak Forward Surge Current TJ = TJ max. 8.3 mS Single Half Sine Wave (Jedec Method) 1N4001GP . . . 07GP Series 1.0 Amp MEGARECTIFIERS Data Sheet Amps pF TJ = 25°°C f = 1.0 MHZ VSIG = 50mVp-p Reverse Voltage (Volts) Number of Cycles @ 60 HZ Typical Instantaneous Forward Characteristics Typical Reverse Characteristics TJ = 25°°C µS Pulse Width = 300µ 1% Duty Cycle Volts µ Amps Amps TJ = 100°°C TJ = 25°°C Percent of Rated Peak Voltage NOTES: 1. Measured @ 1 MHZ and applied reverse voltage of 4.0V. 2. Thermal Resistance from Junction to Ambient at 3/8" Lead Length, P.C. Board Mounted. 3. Reverse Recovery Condition IF = 0.5A, IR = 1.0A, IRR = 0.25A. Ratings at 25 Deg. C ambient temperature unless otherwise specified. Single Phase Half Wave, 60 HZ Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%. Page 6-5