FAIRCHILD 74F86SJ

Revised July 1999
74F86
2-Input Exclusive-OR Gate
General Description
This device contains four independent gates, each of which
performs the logic exclusive-OR function.
Ordering Code:
Order Number
Package Number
Package Description
74F86SC
M14A
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow
74F86SJ
M14D
14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
74F86PC
N14A
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Logic Symbol
Connection Diagram
IEEE/IEC
Unit Loading/Fan Out
Pin Names
An, Bn
On
© 1999 Fairchild Semiconductor Corporation
U.L.
Input IIH/I IL
HIGH/LOW
Output I OH/IOL
Inputs
1.0/1.0
20 µA/−0.6 mA
Outputs
50/33.3
−1 mA/20 mA
Description
DS009470
www.fairchildsemi.com
74F86 2-Input Exclusive-OR Gate
April 1988
74F86
Absolute Maximum Ratings(Note 1)
Storage Temperature
−65°C to +150°C
Recommended Operating
Conditions
Ambient Temperature under Bias
−55°C to +125°C
Free Air Ambient Temperature
Junction Temperature under Bias
−55°C to +150°C
Supply Voltage
0°C to +70°C
+4.5V to +5.5V
−0.5V to +7.0V
VCC Pin Potential to Ground Pin
Input Voltage (Note 2)
−0.5V to +7.0V
Input Current (Note 2)
−30 mA to +5.0 mA
Voltage Applied to Output
in HIGH State (with VCC = 0V)
Standard Output
−0.5V to VCC
3-STATE Output
−0.5V to +5.5V
Note 1: Absolute maximum ratings are values beyond which the device
may be damaged or have its useful life impaired. Functional operation
under these conditions is not implied.
Current Applied to Output
Note 2: Either voltage limit or current limit is sufficient to protect inputs.
in LOW State (Max)
twice the rated IOL (mA)
DC Electrical Characteristics
Symbol
Parameter
Min
Typ
Max
2.0
Units
VCC
VIH
Input HIGH Voltage
VIL
Input LOW Voltage
0.8
V
VCD
Input Clamp Diode Voltage
−1.2
V
Min
VOH
Output HIGH Voltage
V
Min
10% VCC
2.5
5% VCC
2.7
10% VCC
Max
VIN = 2.7V
Max
VIN = 7.0V
µA
Max
VOUT = VCC
V
0.0
3.75
µA
0.0
Input HIGH Current
5.0
IBVI
Input HIGH Current Breakdown Test
7.0
ICEX
Output HIGH Leakage Current
50
VID
Input Leakage Test
4.75
Input LOW Current
Output Short-Circuit Current
ICCH
Power Supply Current
ICCL
Power Supply Current
IOH = −1 mA
µA
0.5
Output Leakage Circuit Current
IOH = −1 mA
µA
IIH
IOS
Recognized as a LOW Signal
IIN = −18 mA
IOL = 20 mA
Output LOW Voltage
IIL
Recognized as a HIGH Signal
Min
VOL
IOD
Conditions
V
IID = 1.9 µA
All other pins grounded
VIOD = 150 mV
All other pins grounded
−0.6
mA
Max
VIN = 0.5V
−150
mA
Max
VOUT = 0V
12
18
mA
Max
VO = HIGH
18
28
mA
Max
VO = LOW
−60
AC Electrical Characteristics
Symbol
Parameter
TA = +25°C
TA = 0°C to +70°C
VCC = +5.0V
VCC = +5.0V
CL = 50 pF
CL = 50 pF
Min
Typ
Max
Min
Max
tPLH
Propagation Delay
3.0
4.0
5.5
3.0
6.5
tPHL
An, Bn to On
3.0
4.2
5.5
3.0
6.5
Units
ns
(Other Input LOW)
tPLH
Propagation Delay
3.5
5.3
7.0
3.5
8.0
tPHL
An, Bn to On
3.0
4.7
6.5
3.0
7.5
(Other Input HIGH)
www.fairchildsemi.com
2
ns
74F86
Physical Dimensions inches (millimeters) unless otherwise noted
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow
Package Number M14A
14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M14D
3
www.fairchildsemi.com
74F86 2-Input Exclusive-OR Gate
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Package Number N14A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
4