NTE NTE2033

NTE2033
Integrated Circuit
Non–Inverting Transistor Array, Low Input Active
Description:
The NTE2033 is a non–inverting transistor array, which is comprised of four NPN darlington output stages and PNP input stages. This device is low level input active driver and is suitable for
operation with TTL, 5V C–MOS and 5V Microprocessor which have sink current output drivers.
Features:
D Output Current: 1.5A Max.
D High Sustaining Voltage: 50V Min.
D Low Level Active Inputs
D TTL and C–MOS Compatible Inputs
D Standard Supply Voltage
D Two VCC Terminals VCC1, VCC2 (Separated)
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 to 10V
Output Sustaining Voltage, VCE(sus) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 to +50V
Output Current, IOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5A
Input Current, IIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –10mA
Input Voltage, VIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 to +30V
Clamp Diode Reverse Voltage, VR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50V
Clamp Diode Forward Current, IF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5A
Common Terminal Current, ICOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0A
GND Terminal Current, IGND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0A
Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7W
Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +85°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +150°C
Recommended Operating Conditions: (TA = –40° to +85°C unless otherwise specified)
Parameter
Min
Typ
Max
Unit
VCC
4.5
–
5.5
V
VCE(sus)
0
–
50
V
Output Current
IOUT
0
–
1.25
V
Input Voltage
VIN
0
–
25
V
Clamp Diode Reverse Voltage
VR
0
–
50
µA
Clamp Diode Forward Voltage
VF
0
–
1.25
A
Power Dissipation
PD
0
–
1.0
W
Supply Voltage
Output Sustaining Voltage
Symbol
Test Conditions
Electrical Characteristics: (TA = +25°C unless otherwise specified)
Parameter
Symbol
Test Conditions
Min
Typ
Max
Unit
“H” Level Input Voltage
VIH
VCC–1.6
–
25
V
“C” Level Input Voltage
VIL
0
–
VCC–3.6
V
“H” Level Input Current
IIH
–
–
10
µA
“L” Level Input Current
IIL
VCC = 5.5V, VIN = 0.4V
–
–0.05
–0.36
mA
VOUT = 50V, TA = +85°C
–
–
100
µA
VCE(sat) VCC = 4.5V, IOUT = 0.7A
–
1.3
1.8
V
Output Leak Current
ICEX
Collector–Emitter Saturation Voltage
Clamp Diode Reverse Current
IR
VR = 50V
–
–
50
µA
Clamp Diode Forward Voltage
VF
IF = 1.25A
–
1.5
–
V
VCC = 5.5V, VIN = 0V
–
8.5
12.5
mA/Gate
–
–
10
µA
ICC(ON)
Supply Current
ICC(OFF) VCC = 5.5V, VIN = VCC
Turn–ON Delay
tON
VCC = 5V, RL = 43Ω
–
0.2
–
µs
Turn–OFF Delay
tOFF
VOUT = 50V, CL = 15pF
–
5.0
–
µs
Pin Connection Diagram
VCC 1 1
16 Common1 *
O1 2
I1 3
15 O4
14 I4
GND/Heat Sink 4
13 GND/Heat Sink
GND/Heat Sink 5
12 GND/Heat Sink
11 I3
I2 6
O2 7
10 O3
VCC 2 8
9 Common2 *
Note: These pins are internally connected.
16
9
1
8
.870 (22.0)
Max
.260 (6.6)
Max
.200 (5.08)
Max
.100 (2.54)
.700 (17.78)
.099 (2.5) Min