MOTOROLA MC145145DW2

Order this document
by MC145145–2/D
SEMICONDUCTOR TECHNICAL DATA
!
P SUFFIX
PLASTIC DIP
CASE 707
Interfaces with Single–Modulus Prescalers
The MC145145–2 is programmed by a 4–bit input, with strobe and address
lines. The device features consist of a reference oscillator, 12–bit programmable reference divider, digital phase detector, 14–bit programmable divide–
by–N counter, and the necessary latch circuitry for accepting the 4–bit input
data.
•
•
•
•
•
•
•
Operating Temperature Range: – 40 to 85°C
Low Power Consumption Through the Use of CMOS Technology
3.0 to 9.0 V Supply Range
Single Modulus 4–Bit Data Bus Programming
÷ N Range = 3 to 16,383, ÷ R Range = 3 to 4,095
“Linearized” Digital Phase Detector Enhances Transfer Function Linearity
Two Error Signal Options:
Single–Ended (Three–State)
Double–Ended
18
1
DW SUFFIX
SOG PACKAGE
CASE 751D
20
1
ORDERING INFORMATION
MC145145P2
MC145145DW2
Plastic DIP
SOG Package
PIN ASSIGNMENTS
PLASTIC DIP
NOT RECOMMENDED FOR NEW DESIGNS;
PRODUCT TO BE PHASED OUT.
Closest equivalents are the MC145151–2, MC145170–1,
MC14519X series, and MC14520X series.
BLOCK DIAGRAM
REFout
OSCin
1
18
D2
D0
2
17
D3
fin
3
16
REFout
VSS
4
15
φR
VDD
5
14
φV
OSCin
6
13
LD
OSCout
7
12
PDout
A0
8
11
ST
A1
9
10
A2
12–BIT R COUNTER
SOG PACKAGE
OSCout
LATCH 4
D0
D1
D2
D3
A0
A1
A2
D1
LATCH 5
LOCK
DETECT
LATCH 6
fR
LATCH
CONTROL
CIRCUITRY
fV
LATCH 0
LATCH 1
LATCH 2
L3
PHASE
DETECTOR
B
D1
1
20
D2
D0
2
19
D3
NC
3
18
REFout
fin
4
17
φR
VSS
5
16
φV
VDD
6
15
LD
OSCin
7
14
PDout
φV
OSCout
8
13
ST
φR
A0
9
12
A2
A1
10
11
NC
PDout
LATCHES
ST
fin
PHASE
DETECTOR
A
LD
14–BIT N COUNTER
NC = NO CONNECTION
REV 2
1/98
TN98012200

Motorola, Inc. 1998
MOTOROLA
MC145145–2
1
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Affirmative Action Employer.
Mfax is a trademark of Motorola, Inc.
How to reach us:
USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;
P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447
Mfax: [email protected] – TOUCHTONE 1–602–244–6609
Motorola Fax Back System
– US & Canada ONLY 1–800–774–1848
– http://sps.motorola.com/mfax/
HOME PAGE: http://motorola.com/sps/
MC145145–2
2
◊
JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 141,
4–32–1 Nishi–Gotanda, Shagawa–ku, Tokyo, Japan. 03–5487–8488
ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
CUSTOMER FOCUS CENTER: 1–800–521–6274
MC145145–2/D