MAXIM MAX4702EGE

19-2129; Rev 0; 8/01
Low-Voltage, Dual DPDT/Quad SPDT
Analog Switches in QFN
The MAX4699/MAX4701/MAX4702 are low-voltage,
single-supply CMOS analog switches. The MAX4699/
MAX4701 are dual double-pole/double-throw (DPDT)
switches with two control inputs that control two
single-pole/double-throw (SPDT) switches each. The
MAX4702 is a quad SPDT switch with one control input
and one low-voltage digital logic power supply.
These devices operate from a single +1.8V to +5.5V
power supply. When powered from a +2.7V supply the
MAX4699/MAX4701/MAX4702 offer a 75Ω on-resistance (RON), with 12Ω max RON flatness and 4Ω max
matching between channels. Each switch has Rail-toRail® signal handling, fast switching speeds of tON =
35ns, tOFF = 20ns, and a maximum 1nA of leakage current.
The MAX4699/MAX4701 digital inputs are 1.8V-logic
compatible when operated from a +3V supply. The
MAX4702’s digital inputs feature a 1.0V threshold when
powered with a 1.5V logic supply.
The MAX4699 is available in a space-saving 16-lead
4mm x 4mm QFN package. The MAX4701/MAX4702
are available in space-saving 16-lead 3mm x 3mm QFN
and 16-pin TSSOP packages.
Features
♦ 3mm x 3mm and 4mm x 4mm 16-Pin QFN
Package
♦ Guaranteed On-Resistance:
75Ω (max) (+3V Supply)
40Ω (max) (+5V Supply)
♦ Guaranteed Match Between Channels:
4Ω max
♦ Guaranteed Flatness Over Signal Range:
12Ω max
♦ Low Leakage Currents Over Temperature:
1nA Max at +85°C
♦ Fast Switching: tON = 35ns, tOFF = 20ns
♦ Guaranteed Break-Before-Make
♦ Single-Supply Operation from +1.8V to +5.5V
♦ Rail-to-Rail Signal Handling
♦ -3dB Bandwidth: 250MHz
♦ Low Crosstalk: -79dB (1MHz)
♦ High Off-Isolation: -76dB (1MHz)
Applications
Audio and Video Signal Routing
Ordering Information
PART
TEMP. RANGE
PIN-PACKAGE
Cellular Phones
MAX4699EGE
-40°C to +85°C
Battery-Operated Equipment
MAX4701EUE
-40°C to +85°C
16 TSSOP
Communications Circuits
MAX4701EGE
-40°C to +85°C
16 QFN (3mm x 3mm)
Modems
MAX4702EUE
-40°C to +85°C
16 TSSOP
MAX4702EGE
-40°C to +85°C
16 QFN (3mm x 3mm)
16 QFN (4mm x 4mm)
Pin Configurations
TOP VIEW
COM1
NO1
V+
NC4
COM1
NO1
V+
NC4
16
15
14
13
16
15
14
13
12
COM4
11
NO4
3
10
1N3, IN4
4
9
NC3
NC1
1
IN1, IN2
2
*MAX4701/MAX4702
ARE IN A
NO2
3mm x 3mm
QFN PACKAGE
COM2
MAX4699/
MAX4701*
12
COM4
11
NO4
3
10
VL
4
9
NC3
NC1
1
IN
2
NO2
COM2
MAX4702*
5
6
7
8
5
6
NC2
GND
NO3
COM3
NC2
GND
QFN
Pin Configurations continued at end of data sheet.
7
NO3
QFN
8
COM3
Rail-to-Rail is a registered trademark of Nippon Motorola, Inc.
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
1
MAX4699/MAX4701/MAX4702
General Description
MAX4699/MAX4701/MAX4702
Low-Voltage, Dual DPDT/Quad SPDT
Analog Switches in QFN
ABSOLUTE MAXIMUM RATINGS
(Voltages Referenced to GND)
V+ ............................................................................-0.3V to +6V
VL, IN_, COM_, NO_, NC_ (Note1) .............. -0.3V to (V+ + 0.3V)
Continuous Current COM_, NO_, NC_ ............................ ±20mA
Peak Current COM_, NO_, NC_ (pulsed at 1ms, 10%
duty cycle)....................................................................±40mA
ESD per Method 3015.7....................................................>2.5kV
Continuous Power Dissipation (TA = +70°C)
TSSOP (derate 5.6mW/°C above +70°C) ................. 444mW
QFN (3 x 3) (derate 16.9mW/°C above +70°C) ...... 1349mW
QFN (4 x 4) (derate 18.5mW/°C above +70°C) ...... 1481mW
Operating Temperature Range .......................... -40°C to +85°C
Storage Temperature Range ........................... -65°C to +150°C
Lead Temperature (soldering, 10s) ............................... +300°C
Note 1: Signals on IN_, COM_, NO_, and NC_ exceeding 0 or V+ are clamped by internal diodes. Limit forward-diode current to
maximum current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Single +3V Supply
(V+ = +2.7V to +3.3V, GND = 0, VIH = +1.4V, VIL = +0.5V, (VL = +1.5V, VIH = +1.0V, VIL = +0.4V for MAX4702 only), TA = -40°C to
+85°C. Typical values are at V+ = +3V and TA = +25°C, unless otherwise noted.) (Notes 2, 3)
PARAMETER
SYMBOL
CONDITIONS
TA
MIN
TYP
MAX
UNITS
V+
V
ANALOG SWITCH
Analog Signal Range
VCOM_,
VNO_, VNC_
0
+25°C
RON
V+ = +2.7V, ICOM_ = 10mA;
VNO_ or VNC_ = +1.5V
TMIN to TMAX
On-Resistance Match Between
Channels (Note 4)
∆RON
V+ = +2.7V, ICOM_ = 10mA;
VNO_ or VNC_ = +1.5V
TMIN to TMAX
On-Resistance Flatness (Note 5)
RFLAT (ON)
V+ = +2.7V, ICOM_ = 10mA;
VNO_ or VNC_ = +1V,
+1.5V, +2V
NO_, NC_ Off-Leakage Current
(Note 6)
INO_(OFF),
INC_(OFF)
V+ = +3.3V, VCOM_ = +1V,
+3V; VNO_ or VNC_ = +3V, +1V
COM_ On-Leakage Current
(Note 6)
V+ = +3.3V, VCOM_ = +1V,
ICOM_ (ON) +3V; VNO_ or VNC_ = +1V,
+3V, or floating
On-Resistance
60
75
85
+25°C
2
4
5
+25°C
8
TMIN to TMAX
12
14
+25°C
-0.5
+0.5
TMIN to TMAX
-1
1
+25°C
-0.5
+0.5
TMIN to TMAX
-1
1
Ω
Ω
Ω
nA
nA
DYNAMIC
+25°C
Turn-On Time
tON
VNO_ or VNC_ = +2V; RL =
300Ω, CL = 35pF, Figure 2
TMIN to TMAX
Turn-Off Time
tOFF
VNO_ or VNC_ = +2V; RL =
300Ω, CL = 35pF, Figure 2
TMIN to TMAX
Break-Before-Make (Note 6)
tBBM
VNO_ or VNC_ = +2V; RL =
300Ω, CL = 35pF, Figure 2
TMIN to TMAX
On-Channel -3dB Bandwidth
BW
Signal = 0, 50Ω
in and out, Figure 5
Off-Isolation (Note 7)
VISO
f = 1MHz, RL = 50Ω,
CL = 5pF, Figure 5
2
27
45
+25°C
15
20
25
+25°C
+25°C
35
15
1
ns
ns
ns
250
MHz
-76
dB
_______________________________________________________________________________________
Low-Voltage, Dual DPDT/Quad SPDT
Analog Switches in QFN
(V+ = +2.7V to +3.3V, GND = 0, VIH = +1.4V, VIL = +0.5V, (VL = +1.5V, VIH = +1.0V, VIL = +0.4V for MAX4702 only), TA = -40°C to
+85°C. Typical values are at V+ = +3V and TA = +25°C, unless otherwise noted.) (Notes 2, 3)
PARAMETER
Crosstalk (Note 8)
SYMBOL
NO_, NC_, Off-Capacitance
Switch On-Capacitance
Total Harmonic Distortion
TA
MIN
TYP
MAX
UNITS
f = 1MHz, RL = 50Ω,
CL = 5pF, Figure 5
+25°C
-79
dB
Q
VGEN = 0, RGEN = 0Ω,
CL = 1.0nF, Figure 4
+25°C
0.5
pC
CNO_(OFF),
CNC_(OFF)
f = 1MHz, VNO_,
VNC_ = GND, Figure 6
+25°C
8
pF
f = 1MHz, Figure 6
+25°C
20
pF
f = 20Hz to 20kHz, 2.5Vp-p,
RL = 600Ω
+25°C
0.02
%
VCT
Charge Injection
CONDITIONS
C(ON)
THD
DIGITAL I/O
Input Logic High
VIH
Input Logic Low
VIL
Input Leakage Current
IIH, IIL
MAX4699/MAX4701
1.4
MAX4702 (VL = +1.5V)
1.0
V
MAX4699/MAX4701
0.8
MAX4702 (VL = +1.5V)
0.4
VIN = 0 to V+
V
-1
1
µA
SUPPLY
Power-Supply Range
V+
1.8
5.5
V
Logic Power-Supply Input
VL
1.5
V+
V
Positive Supply Current
I+
-1
1
µA
V+ = +3.3V, VIN = 0 or V+
TMIN to TMAX
ELECTRICAL CHARACTERISTICS—Single +5V Supply
(V+ = +5V ±10%, GND = 0, VIH = +2.4V, VIL = +0.8V, (VL = +1.5V, VIH = +1.0V, VIL = +0.4V for MAX4702 only), TA = -40°C to
+85°C. Typical values are at V+ = +5V and TA = +25°C, unless otherwise noted.) (Notes 2, 3)
PARAMETER
Analog Signal Range
SYMBOL
CONDITIONS
MIN
TYP
0
RON
V+ = +4.5V, ICOM_ = 10mA;
VNO_ or VNC_ = +3.5V
On-Resistance Match Between
Channels (Note 4)
∆RON
V+ = +4.5V, ICOM_ = 10mA;
VNO_ or VNC_ = +3.5V
On-Resistance Flatness (Note 5)
RFLAT (ON)
V+ = +4.5V, ICOM_ = 10mA;
VNO_ or VNC_ = +2.0V,
+2.25V, +3.5V
On-Resistance
TA
VCOM_,
VNO_, VNC_
+25°C
30
TMIN to TMAX
+25°C
UNITS
V+
V
40
50
1
TMIN to TMAX
+25°C
MAX
3
5
5
Ω
Ω
8
Ω
TMIN to TMAX
10
DYNAMIC
Turn-On Time
tON
VNO_ or VNC_ = +3V; RL =
300Ω, CL = 35pF, Figure 2
+25°C
TMIN to TMAX
15
18
20
ns
_______________________________________________________________________________________
3
MAX4699/MAX4701/MAX4702
ELECTRICAL CHARACTERISTICS—Single +3V Supply (continued)
MAX4699/MAX4701/MAX4702
Low-Voltage, Dual DPDT/Quad SPDT
Analog Switches in QFN
ELECTRICAL CHARACTERISTICS—Single +5V Supply (continued)
(V+ = +5V ±10%, GND = 0, VIH = +2.4V, VIL = +0.8V, (VL = +1.5V, VIH = +1.0V, VIL = +0.4V for MAX4702 only), TA = -40°C to
+85°C. Typical values are at V+ = +5V and TA = +25°C, unless otherwise noted.) (Notes 2, 3)
PARAMETER
SYMBOL
CONDITIONS
Turn-Off Time
tOFF
VNO_ or VNC_ = +3V; RL =
300Ω, CL = 35pF, Figure 2
Break-Before-Make (Note 6)
tBBM
VNO_ or VNC_ = +3V; RL =
300Ω, CL = 35pF, Figure 2
Charge Injection
Q
VGEN = 0, RGEN = 0,
CL = 1.0nF, Figure 4
TA
MIN
+25°C
TYP
7
TMIN to TMAX
12
15
+25°C
TMIN to TMAX
MAX
10
ns
ns
2
+25°C
UNITS
0.5
pC
DIGITAL I/O
Input Logic High
VIH
Input Logic Low
VIL
Logic Input Current
IIH, IIL
MAX4699/MAX4701
2.4
MAX4702 (VL = +1.5V)
1.0
V
MAX4699/MAX4701
0.8
MAX4702 (VL = +1.5V)
0.4
VIN = 0 to V+
-1
1
V
µA
Note 2: The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in
this data sheet.
Note 3: -40°C specifications are guaranteed by design.
Note 4: ∆RON = RON(MAX) - RON(MIN).
Note 5: Flatness is defined as the difference between the maximum and minimum value of on-resistance as
measured over the specified analog signal ranges.
Note 6: Guaranteed by design.
Note 7: Off-Isolation = 20log10 (VCOM_ / VNO), VCOM = output, VNO = input to off switch.
Note 8: Between any two switches.
4
_______________________________________________________________________________________
Low-Voltage, Dual DPDT/Quad SPDT
Analog Switches in QFN
ON-RESISTANCE vs. COM VOLTAGE
OVER TEMPERATURE (V+ = +2.7V)
TA = +85°C
TA = +25°C
TA = +25°C
TA = +85°C
50
60
V+ = +3.3V
40
50
RON (Ω)
V+ = +2.7V
40
TA = -40°C
30
30
20
TA = -40°C
20
10
V+ = +2.7V
ICOM = 10mA
10
2
1
4
3
0
5
0.5
1.0
1.5
2.0
2.5
0
0.5
1.0
1.5
2.0
2.5
VCOM (V)
VCOM (V)
VCOM (V)
ON-RESISTANCE vs. COM VOLTAGE
OVER TEMPERATURE (V+ = +5V)
ON-LEAKAGE CURRENT
vs. TEMPERATURE
OFF-LEAKAGE CURRENT
vs. TEMPERATURE
SUPPLY CURRENT (pA)
20
10
100
10
1
TA = -40°C
V+ = +5V
ICOM = 10mA
MAX4699 toc05b
10
1
V+ = +2.7V
0.1
1
100
V+ = +2.7V
0
2
3
4
5
0.1
-40
-20
0
20
40
60
80
-40
-20
0
20
40
60
VCOM (V)
TEMPERATURE (°C)
TEMPERATURE (°C)
CHARGE INJECTION vs. COM VOLTAGE
OVER SUPPLY VOLTAGE
SUPPLY CURRENT vs.
TEMPERATURE
SUPPLY CURRENT vs.
LOGIC INPUT VOLTAGE
SUPPLY CURRENT (nA)
4
100
3
V+ = +5V
2
10
1
0.1
V+ = +3V
1
80
1000
MAX4701
V+ = +2.7V
100
SUPPLY CURRENT (µA)
ICOM = 10mA
MAX4699 toc07
1000
MAX4699 toc06
5
3.0
1000
OFF-LEAKAGE CURRENT (pA)
TA = +85°C
MAX4699 toc05a
1000
MAX4699 toc04
TA = +25°C
30
0
V+ = +3.3V
ICOM = 10mA
0
0
10
MAX4699 toc08
V+ = +5V
ICOM = 10mA
40
CHARGE INJECTION (pC)
60
MAX4699 toc03
70
ON-RESISTANCE vs. COM VOLTAGE
OVER TEMPERATURE (V+ = +3.3V)
MAX4699 toc02
V+ = +1.8V
0
RON (Ω)
80
MAX4699 toc01
120
110
100
90
80
70
60
50
40
30
20
10
0
RON (Ω)
RON (Ω)
ON-RESISTANCE vs. COM VOLTAGE
OVER SUPPLY VOLTAGE
1
0.1
0.01
0.001
0.0001
0.01
0.00001
0.001
0
0
1
2
3
VCOM (V)
4
5
0.000001
-40
-20
0
20
40
TEMPERATURE (°C)
60
80
0
0.5
1.0
1.5
2.0
2.5
LOGIC INPUT VOLTAGE (V)
_______________________________________________________________________________________
5
MAX4699/MAX4701/MAX4702
Typical Operating Characteristics
(TA = +25°C, unless otherwise noted. VL = +1.5V for MAX4702 only)
Typical Operating Characteristics (continued)
(TA = +25°C, unless otherwise noted. VL = +1.5V for MAX4702 only)
TURN-ON/OFF TIME
vs. TEMPERATURE
V+ = +2.7V
tON/tOFF (ns)
tON
15
10
tON
25
20
tOFF
15
tOFF
5
VIN RISING
3.2
3.7
4.2
4.7
5.2
1.0
VIN FALLING
0.8
0.6
0.2
5
2.7
1.2
0.4
10
0
V+ = +5V
MAX4702
1.4
LOGIC THRESHOLD (V)
35
30
20
1.6
MAX4699 toc10
25
LOGIC THRESHOLD vs. VL
40
MAX4699 toc09
30
0
-40
-20
SUPPLY VOLTAGE (V)
0
20
40
60
80
1
2
3
TEMPERATURE (°C)
TOTAL HARMONIC DISTORTION
vs. FREQUENCY
-20
MAX4699 toc13
0.1
MAX4699 toc12
ON-REPONSE
4
VL (V)
FREQUENCY RESPONSE
0
OFF-ISOLATION
THD (%)
LOSS (dB)
-40
-60
CROSSTALK
RL = 600Ω
0.01
-80
-100
-120
0.001
0.1
1
10
FREQUENCY (MHz)
6
100
MAX4699 toc11
TURN-ON/OFF TIME
vs. SUPPLY VOLTAGE
tON/tOFF (ns)
MAX4699/MAX4701/MAX4702
Low-Voltage, Dual DPDT/Quad SPDT
Analog Switches in QFN
1000
10
100
1k
10k
FREQUENCY (Hz)
_______________________________________________________________________________________
100k
5
Low-Voltage, Dual DPDT/Quad SPDT
Analog Switches in QFN
QFN PIN
TSSOP PIN
MAX4699/
MAX4701
MAX4702
MAX4701
MAX4702
NAME
FUNCTION
1
1
3
3
NC1
—
2
—
4
IN
2
—
4
—
IN1, IN2
3
3
5
5
NO2
4
4
6
6
COM2
5
5
7
7
NC2
Analog Switch 2—Normally Closed Terminal
6
6
8
8
GND
Ground
7
7
9
9
NO3
Analog Switch 3—Normally Open Terminal
8
8
10
10
COM3
9
9
11
11
NC3
—
10
—
12
VL
10
—
12
—
IN3, IN4
11
11
13
13
NO4
12
12
14
14
COM4
13
13
15
15
NC4
14
14
16
16
V+
15
15
1
1
NO1
16
16
2
2
COM1
Analog Switch 1—Normally Closed Terminal
Digital Control Input Switch 1, 2, 3, and 4
Digital Control Input Switch 1 and 2
Analog Switch 2—Normally Open Terminal
Analog Switch 2—Common Terminal
Analog Switch 3—Common Terminal
Analog Switch 3—Normally Closed Terminal
Logic Power-Supply Input
Digital Control Input Switch 3 and 4
Analog Switch 4—Normally Open Terminal
Analog Switch 4—Common Terminal
Analog Switch 4—Normally Closed Terminal
Positive Supply Voltage Input
Analog Switch 1—Normally Open Terminal
Analog Switch 1—Common Terminal
Detailed Description
The MAX4699/MAX4701 are low-voltage CMOS analog
switches that operate from a single +1.8V to +5.5V
power supply. The MAX4702 requires an additional
logic supply that allows for setting lower logic thresholds. The MAX4699/MAX4701 are double-pole/doublethrow (DPDT) devices. The MAX4702 is a quad
single-pole/double-throw (SPDT) device. These devices
feature a break-before-make switching, fast switching
speeds (with V+ = 5V: tON = 18ns max, tOFF = 9ns max
and with V+ = 3V: tON = 35ns, tOFF = 20) and rail-to-rail
signal handling. A logic input on the MAX4702 allows
for logic thresholds as low as 1.0V.
POSITIVE SUPPLY
D1
V+
MAX4699
MAX4701
MAX4702
NO
COM
Vg
GND
D2
Applications Information
Analog Signal Levels
Figure 1. Overvoltage Protection Using Two External Blocking
Diodes
Analog signals that range over the entire supply voltage
(V+ to GND) can be passed with very little change in onresistance (see Typical Operating Characteristics). The
switches are bidirectional, so the NO, NC, and COM pins
can be used as either inputs or outputs.
_______________________________________________________________________________________
7
MAX4699/MAX4701/MAX4702
Pin Description
MAX4699/MAX4701/MAX4702
Low-Voltage, Dual DPDT/Quad SPDT
Analog Switches in QFN
Power-Supply Sequencing and
Overvoltage Protection
Caution: Do not exceed the absolute maximum ratings because stresses beyond the listed ratings
may cause permanent damage to the devices.
Proper power-supply sequencing is recommended for
all CMOS devices. Always apply V+ before applying
analog signals, especially if the analog signal is not current limited. If this sequencing is not possible, and if the
analog inputs are not current limited to <20mA, add a
small-signal diode (D1) as shown in Figure 1. If the analog signal can dip below GND, add D2. Adding protection diodes reduces the analog range to a diode drop
(about 0.7V) below V+ (for D1), and a diode drop above
ground (for D2). On-resistance increases slightly at low
supply voltages. Maximum supply voltage (V+) must not
exceed +6V.
Adding protection diode D2 causes the logic threshold
to be shifted relative to GND. TTL compatibility is not
guaranteed when D2 is added.
Protection diodes D1 and D2 also protect against some
overvoltage situations. With Figure 1’s circuit, if the supply voltage is below the absolute maximum rating, and
if a fault voltage up to the absolute maximum rating is
applied to an analog signal pin, no damage will result.
VL Logic Input (MAX4702)
The MAX4702 features a VL logic input that allows for
lower logic input thresholds down to 1.0V min for VIH in
the quad SPDT configuration. Power-up VL after V+ has
been powered with a minimum of 1.5V to ensure proper
operation of the device.
Test Circuits/Timing Diagrams
MAX4699
MAX4701
MAX4702
V+
VN_
LOGIC
INPUT
V+
COM_
NO_
OR NC_
50%
VIL
VOUT
RL
300Ω
CL
35pF
t OFF
IN_
LOGIC
INPUT
VOUT
GND
SWITCH
OUTPUT
(
0.9 x V0UT
0.9 x VOUT
0
t ON
CL INCLUDES FIXTURE AND STRAY CAPACITANCE.
RL
RL + RON
VOUT = VN_
t r < 5ns
t f < 5ns
VIH
LOGIC INPUT WAVEFORMS INVERTED FOR SWITCHES
THAT HAVE THE OPPOSITE LOGIC SENSE.
)
Figure 2. Switching Time
V+
MAX4699
MAX4701
MAX4702
VN_
LOGIC
INPUT
V+
NC_
50%
VIL
VOUT
COM_
VIH
NO_
RL
300Ω
IN_
LOGIC
INPUT
CL
35pF
GND
0.9 x VOUT
VOUT
tD
CL INCLUDES FIXTURE AND STRAY CAPACITANCE.
Figure 3. Break-Before-Make Interval
8
_______________________________________________________________________________________
Low-Voltage, Dual DPDT/Quad SPDT
Analog Switches in QFN
V+
MAX4699
MAX4701
MAX4702
∆VOUT
V+
RGEN
NC_
OR NO_
VOUT
COM_
VOUT
IN_
OFF
CL
V GEN
GND
OFF
ON
IN
IN_
VIL TO VIH
ON
OFF
OFF
Q = (∆V OUT )(C L )
IN DEPENDS ON SWITCH CONFIGURATION;
INPUT POLARITY DETERMINED BY SENSE OF SWITCH.
Figure 4. Charge Injection
V+ 10nF
V
OFF-ISOLATION = 20log OUT
VIN
NETWORK
ANALYZER
V OR V+
V+
IN_
NC_
50Ω
MAX4699
MAX4701
MAX4702
50Ω
VIN
COM_
VOUT
NO_
GND
V
ON-LOSS = 20log OUT
VIN
50Ω
MEAS
50Ω
V
CROSSTALK = 20log OUT
VIN
REF
50Ω
MEASUREMENTS ARE STANDARDIZED AGAINST SHORTS AT IC TERMINALS.
OFF-ISOLATION IS MEASURED BETWEEN COM_ AND "OFF" NO_ OR NC_ TERMINAL ON EACH SWITCH.
ON-LOSS IS MEASURED BETWEEN COM_ AND "ON" NO_ OR NC_TERMINAL ON EACH SWITCH.
CROSSTALK IS MEASURED FROM ONE CHANNEL TO ALL OTHER CHANNELS.
SIGNAL DIRECTION THROUGH SWITCH IS REVERSED; WORST VALUES ARE RECORDED.
Figure 5. On-Loss, Off-Isolation, and Crosstalk
10nF
Chip Information
V+
V+
COM_
TRANSISTOR COUNT: 269
Substrate connected to GND
MAX4699
MAX4701
MAX4702
IN_
CAPACITANCE
METER
f = 1MHz
NC_ or
NO_
VIL
OR
VIH
GND
Figure 6. Channel Off/On-Capacitance
_______________________________________________________________________________________
9
MAX4699/MAX4701/MAX4702
Test Circuits/Timing Diagrams (continued)
Low-Voltage, Dual DPDT/Quad SPDT
Analog Switches in QFN
MAX4699/MAX4701/MAX4702
Pin Configurations (continued)
TOP VIEW
MAX4701
NO1 1
COM1 2
16 V+
15 NC4
IN1, IN2 4
NO2 5
14 COM4
IN 4
12 1N3, IN4
13 NO4
12 VL
NO2 5
11 NC3
16 V+
15 NC4
NC1 3
13 NO4
COM2 6
MAX4702
COM1 2
14 COM4
NC1 3
COM2 6
11 NC3
NC2 7
10 COM3
NC2 7
10 COM3
GND 8
9
GND 8
9
IN
ON SWITCHES
NO3
TSSOP
10
NO1 1
IN1,
IN2
IN3,
IN4
ON SWITCHES
L
—
NC1–COM1, NC2–COM2
H
—
NO1–COM1, NO2–COM2
—
L
NC3–COM3, NC4–COM4
—
H
NO3–COM3, NO4–COM4
SWITCHES SHOWN FOR
LOGIC “0” INPUTS
NO3
TSSOP
L
H
NC1–COM1, NC2–COM2
NC3–COM3, NC4–COM4
NO1–COM1, NO2–COM2
NO3–COM3, NO4–COM4
______________________________________________________________________________________
Low-Voltage, Dual DPDT/Quad SPDT
Analog Switches in QFN
32L QFN, 3x3x0.85.EPS
______________________________________________________________________________________
11
MAX4699/MAX4701/MAX4702
Package Information
Low-Voltage, Dual DPDT/Quad SPDT
Analog Switches in QFN
12, 16,20, 24L QFN.EPS
MAX4699/MAX4701/MAX4702
Package Information (continued)
12
______________________________________________________________________________________
Low-Voltage, Dual DPDT/Quad SPDT
Analog Switches in QFN
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 13
© 2001 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.
MAX4699/MAX4701/MAX4702
Package Information (continued)