TOSHIBA JDP4P02U

JDP4P02U
TOSHIBA Diode Silicon Epitaxial Pin Type
JDP4P02U
UHF~VHF Band RF Attenuator Applications
·
Unit: mm
Two independent diodes are packed into 4-pin ultra-small packages
and suitable for high-density mounting.
·
Low capacitance: CT = 0.3 pF (typ.)
·
Low series resistance: rs = 1.0 Ω (typ.)
Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Reverse voltage
VR
30
V
Forward current
IF
50
mA
Junction temperature
Tj
125
°C
Tstg
-55~125
°C
Storage temperature range
JEDEC
―
JEITA
―
TOSHIBA
Weight: 0.006 g (typ.)
Electrical Characteristics (Ta = 25°C)
Characteristics
1-2U1A
Symbol
Test Condition
Min
Typ.
Max
Unit
Reverse voltage
VR
IR = 10 mA
30
¾
¾
V
Reverse current
IR
VR = 30 V
¾
¾
0.1
mA
Forward voltage
VF
IF = 50 mA
¾
0.95
1.0
V
Capacitance
CT
VR = 1 V, f = 1 MHz
¾
0.3
0.5
pF
Series resistance
rs
IF = 10 mA, f = 100 MHz
¾
1.0
¾
W
Note: Signal level when capacitance is measured: Vsig = 20 mVrms
Marking
1
2003-03-24
JDP4P02U
2
2003-03-24
JDP4P02U
RESTRICTIONS ON PRODUCT USE
000707EAA
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
· The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
· The information contained herein is subject to change without notice.
3
2003-03-24