MAXIM MAX2335ETI+

19-0492; Rev 0; 10/05
KIT
ATION
EVALU
LE
B
A
IL
A
AV
450MHz CDMA/OFDM LNA/Mixer
Features
The MAX2335 RF front-end receiver IC is designed for
CDMA and OFDM applications in the 450MHz band.
♦ 1.5dB LNA Noise Figure
The MAX2335 includes a low-noise amplifier (LNA) with
adjustable IIP3 to minimize desensitization due to crossmodulation in the presence of a large interfering signal.
♦ 2.1dB Cascaded Noise Figure
The mixer features differential IF outputs and is
designed for high linearity and low noise, which is well
suited for CDMA and OFDM applications.
An on-chip frequency divider is included to allow the
use of a standard 1GHz VCO. Alternatively, the divider
can be bypassed for use with a lower-frequency VCO.
♦ 16dB LNA Gain
♦ Adjustable LNA IIP3
♦ LO Output Buffer for Transmitter
♦ LO Frequency Divider
♦ Small 5mm x 5mm, 28-Pin (Lead-Free) TQFN
Package
The MAX2335 is available in a 28-pin TQFN package
with exposed paddle and is specified for the -40°C to
+85°C extended temperature range. The device is also
offered in a lead-free package.
Ordering Information
TEMP RANGE
PIN-PACKAGE
PKG
CODE
MAX2335ETI
-40°C to +85°C
28 Thin QFN-EP*
(5mm x 5mm)
T2855-3
MAX2335ETI+
-40°C to +85°C
28 Thin QFN-EP*
(5mm x 5mm)
T2855+3
PART
*EP = Exposed paddle.
+Denotes lead-free package.
Pin Configuration/
Functional Diagram
Applications
IF_CDMA+
IF_CDMA-
N.C.
BUFFEN
VCC
VCC
TOP VIEW
RBIAS
450MHz-Band, WCDMA, IS-95, IS-2000, OFDM,
Wireless Data Links
21
20
19
18
17
16
15
14
N.C.
13
LO_OUT
N.C. 24
12
I.C.
N.C. 25
11
N.C.
10
LO_IN
9
LO/2
8
N.C.
MIXIN 22
I.C. 23
MAX2335
÷2
VCC 26
EP
N.C. 27
3
4
5
6
7
LNAIN
MODEO
MODE1
MODE2
2
GND
1
RLNA
+
DEGEN
LNAOUT 28
THIN QFN
5mm x 5mm
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
1
MAX2335
General Description
MAX2335
450MHz CDMA/OFDM LNA/Mixer
ABSOLUTE MAXIMUM RATINGS
VCC to GND ...........................................................-0.3V to +4.3V
All Other Pins to GND.................................-0.3V to (VCC + 0.3V)
AC Input Pins (LNAIN, LO_IN, MIXIN) to GND ...............1V Peak
Continuous Power Dissipation (TA = +70°C)
28-Pin Thin QFN (derate 34.5mW/°C above +70°C) ...........2.7W
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
CAUTION! ESD SENSITIVE DEVICE
DC ELECTRICAL CHARACTERISTICS
(VCC = +2.9V to +3.3V, RBIAS = 18kΩ, RLNA = 24kΩ, BUFFEN = LOW, LO/2 = HIGH, TA = -40°C to +85°C, unless otherwise noted.
Typical values are at VCC = +2.9V, LOW = 0V, HIGH = +3.0V, TA = +25°C, unless otherwise noted.) (Note 1)
PARAMETER
Operating Supply Current
SYMBOL
ICC
CONDITIONS
MIN
TYP
MAX
UNITS
HGHL mode (MODE[2:0] = 111)
32
38
HGLL mode (MODE[2:0] = 101)
24
29
LG mode (MODE[2:0] = 011)
27
31
0.2
10
µA
7
13
mA
mA
Shutdown Supply Current
ICC
Shutdown mode (MODE[2:0] = 000)
LO Buffer Supply Current
ICC
Addition for BUFFEN = HIGH
Digital Input-Logic High
VIH
Digital Input-Logic Low
VIL
0.6
V
Digital Input Current (Logic-High)
IIH
5
µA
Digital Input Current (Logic-Low)
IIL
2
V
-25
µA
AC ELECTRICAL CHARACTERISTICS
(MAX2335 EV Kit, VCC = +2.9V to +3.3V, fLNAIN = fMIXIN = 465MHz, fIF = 110MHz, fLO = 2 x (fMIXIN + fIF), 50Ω system impedance,
RBIAS = 18kΩ, RLNA = 24kΩ, cascaded performance includes 2dB interstage filter loss, TA = -40°C to +85°C, unless otherwise
noted. Typical values are at VCC = +2.9V, PLO_IN = -7dBm, LOW = 0V, HIGH = +3.0V, TA = +25°C, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
OVERALL PERFORMANCE
RF Frequency Range
fRF
LO Frequency Range
fLO
IF Frequency Range
fIF
420 to 470
After optional LO/2
MHz
500 to 660
MHz
80 to 190
MHz
LO Input Power
(Note 2)
-7
-3
LO Buffer Output Power
BUFFEN = HIGH
-10
-6
0
dBm
dBm
Return Loss
All modes, all active ports, including
2-element matching network, if necessary
10
dB
CASCADED PERFORMANCE
HIGH-GAIN, HIGH-LINEARITY MODE (MODE[2:0] = 111)
Gain
G
(Note 1)
Noise Figure
NF
Including off-chip matching, TA = +25°C (Note 2)
Input Third-Order Intercept Point
IIP3
TA = +25°C (Notes 1, 3)
2
23.0
-14
27
31.5
dB
2.2
2.6
dB
-11.5
_______________________________________________________________________________________
dBm
450MHz CDMA/OFDM LNA/Mixer
(MAX2335 EV Kit, VCC = +2.9V to +3.3V, fLNAIN = fMIXIN = 465MHz, fIF = 110MHz, fLO = 2 x (fMIXIN + fIF), 50Ω system impedance,
RBIAS = 18kΩ, RLNA = 24kΩ, cascaded performance includes 2dB interstage filter loss, TA = -40°C to +85°C, unless otherwise
noted. Typical values are at VCC = +2.9V, PLO_IN = -7dBm, LOW = 0V, HIGH = +3.0V, TA = +25°C, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
21.0
26.5
30.5
dB
2.1
2.5
dB
HIGH-GAIN, LOW-LINEARITY MODE (MODE[2:0] = 101)
Gain
G
(Note 1)
Noise Figure
NF
Including off-chip matching, TA = +25°C (Note 2)
Input Third-Order Intercept Point
IIP3
TA = +25°C (Notes 1, 3)
-15
-12.5
dBm
5
9
14
12
15
LOW-GAIN MODE (MODE[2:0] = 011)
Gain
G
(Note 1)
Noise Figure
NF
Including off-chip matching, TA = +25°C (Note 2)
Input Third-Order Intercept Point
IIP3
TA = +25°C (Notes 1, 3)
3
7
dB
dB
dBm
LNA PERFORMANCE
HIGH-GAIN, HIGH-LINEARITY MODE (MODE[2:0] = 111)
Gain
GLNA
15.5
dB
Noise Figure
NFLNA
Including off-chip matching
1.7
dB
Input Third-Order Intercept Point
IIP3LNA
(Note 3)
+7
dBm
HIGH-GAIN, LOW-LINEARITY MODE (MODE[2:0] = 101)
Gain
GLNA
14.5
dB
Noise Figure
NFLNA
Including off-chip matching
1.5
dB
Input Third-Order Intercept Point
IIP3LNA
(Note 3)
+5
dBm
LOW-GAIN MODE (MODE[2:0] = 011)
Gain
GLNA
-2.7
dB
Noise Figure
NFLNA
Including off-chip matching
5.5
dB
Input Third-Order Intercept Point
IIP3LNA
(Note 3)
+14
dBm
MIXER PERFORMANCE
HIGH-GAIN, HIGH-LINEARITY MODE (MODE[2:0] = 111)
Gain
GMIXER
Noise Figure
NFMIXER
Input Third-Order Intercept Point
IIP3MIXER (Note 3)
Including off-chip matching
14
dB
7
dB
+2
dBm
HIGH-GAIN, LOW-LINEARITY MODE (MODE[2:0] = 101)
Gain
GMIXER
Noise Figure
NFMIXER
Input Third-Order Intercept Point
IIP3MIXER (Note 3)
Including off-chip matching
13.5
dB
6.7
dB
0
dBm
14
dB
LOW-GAIN MODE (MODE[2:0] = 011)
Gain
GMIXER
Noise Figure
NFMIXER
Input Third-Order Intercept Point
IIP3MIXER (Note 3)
Including off-chip matching
7
dB
+2
dBm
Note 1: Specifications at TA = +25°C and +85°C are guaranteed by production test. Specifications at TA = -40°C are guaranteed
by design and characterization.
Note 2: Guaranteed by design and characterization.
Note 3: Two-tone IIP3 tested at fRF1 = 465.9MHz and fRF2 = 466.7MHz at -25dBm/tone.
_______________________________________________________________________________________
3
MAX2335
AC ELECTRICAL CHARACTERISTICS (continued)
Typical Operating Characteristics
(MAX2335 EV Kit, VCC = +2.9V, fLNAIN = 465MHz, fIF = 110MHz, fLO_IN = 1150MHz, PLO_IN = -7dBm, RBIAS = 18kΩ, RLNA = 24kΩ,
TA = +25°C, unless otherwise noted.)
LNA GAIN VS RF FREQUENCY
16
HG
LNA NOISE FIGURE (dB)
32
LNA NOISE FIGURE vs. RF FREQUENCY
LNA GAIN (dB)
12
30
8
4
0
28
6
MAX2335 toc02
20
MAX2335 toc01
34
4
2
MAX2335 toc03
SUPPLY CURRENT (HGHL)
vs. TEMPERATURE
SUPPLY CURRENT (mA)
LG
HG
LG
-4
0
-8
-15
10
35
60
400
85
420
440
460
480
420
RLNA = 24kΩ
RBIAS = 18kΩ
3
MIXER HGHL IIP3 (dBm)
RLNA = 18kΩ
8
7
460
MIXER HGHL IIP3 vs. TEMPERATURE
4
MAX2335 toc04
9
440
RF FREQUENCY (MHz)
LNA HGHL IIP3 vs. TEMPERATURE
10
6
2
1
0
RBIAS = 24kΩ
-1
-2
5
-15
10
35
60
-40
85
-15
10
35
60
TEMPERATURE (°C)
TEMPERATURE (°C)
MIXER HG NOISE FIGURE
vs. RF FREQUENCY
MIXER IF PORT DIFFERENTIAL
PORT IMPEDANCE
MAX2335 toc06
7.0
6.8
6.6
6.4
20
EQUIVALENT PARALLEL RESISTANCE (kΩ)
-40
85
MAX2335 toc07
LNA HGHL IIP3 (dBm)
400
RF FREQUENCY (MHz)
TEMPERATURE (°C)
15
420
440
460
RF FREQUENCY (MHz)
480
500
2.0
1.5
CAPACITANCE
10
1.0
5
0.5
RESISTANCE
0
400
4
500
0
0
100
200
300
400
500
RF FREQUENCY (MHz)
_______________________________________________________________________________________
EQUIVALENT PARALLEL CAPACITANCE (pF)
-40
MAX2335 toc05
26
MIXER HG NOISE FIGURE (dB)
MAX2335
450MHz CDMA/OFDM LNA/Mixer
480
500
450MHz CDMA/OFDM LNA/Mixer
PIN
NAME
1
DEGEN
2
RLNA
DESCRIPTION
LNA Degeneration. Connect a 1nH to 3nH inductor from DEGEN to ground.
LNA Bias. Connect an 18kΩ to 24kΩ resistor from RLNA to ground. Adjust RLNA to adjust the linearity
of the input LNA in the HGHL mode.
3
GND
4
LNAIN
RF Input. Requires a DC-blocking capacitor, which can be used as part of the matching network.
Ground. Connect to PC board ground plane using low-inductance vias.
5
MODE0
Logic Input. See Table 1.
6
MODE1
Logic Input. See Table 1.
7
MODE2
Logic Input. See Table 1.
8, 11, 14, 18,
24, 25, 27
N.C.
No Connection. These pins are internally unconnected. Connect to the PC board ground plane.
9
LO/2
Logic Input. Drive low to disable the LO/2. Drive high to enable the LO/2.
10
LO_IN
12, 23
I.C.
13
LO_OUT
15, 16, 26
VCC
17
BUFFEN
19, 20
IF_CDMA-,
IF_CDMA+
21
RBIAS
Bias Resistor Connection. Connect an 18kΩ to 24kΩ resistor from RBIAS to ground. Adjust RBIAS to
adjust the linearity of the input LNA in all modes except HGHL and the mixer in all modes.
22
MIXIN
Mixer Input. Requires an external matching network
28
LNAOUT
LNA Output. Requires an external pullup inductor to VCC and a DC-blocking capacitor, both of which
can be used as part of the matching network.
—
EP
Exposed-Paddle Ground Connection. Solder the exposed paddle (EP) evenly to the board’s ground
plane for proper operation.
LO Input. Internally matched to 50Ω. Requires an external DC-blocking capacitor. The LO input
frequency can be internally divided by two prior to application to the mixer by driving LO/2 high.
Internally Connected. Leave these pins unconnected for proper operation.
LO Buffer Output. Internally matched to 50Ω. Does not require a DC-blocking capacitor. The output
frequency of the buffer is equal to the LO frequency divided by two when LO/2 is high, or the LO
frequency when LO/2 is low.
Power Supply. Bypass pins 16 and 26 to the PC board ground with a capacitor placed as close to the
pin as possible. Do not share capacitor ground vias with other ground connections.
LO Output Buffer Enable. Drive high to enable the LO output buffer. Drive low to disable the LO
output buffer.
Differential IF Output Port. Requires pullup inductors to VCC, which can be used as part of the
matching network.
_______________________________________________________________________________________
5
MAX2335
Pin Description
Detailed Description
Low-Noise Amplifiers (LNAs)
The MAX2335’s LNA gain and linearity characteristics
can be adjusted using the MODE[2:0] inputs. See
Table 1 for the pin settings for various operating
modes. Use high-gain, high-linearity mode (HGHL)
when extra-high linearity is required for cross-modulation suppression in the presence of strong interfering
signals (e.g., when the system transmitter is on). Use
high-gain, low-linearity mode (HGLL) when the transmitter is off and cross-modulation is not a concern, and
use low-gain mode (LG) when receiving large signals.
RLNA can be adjusted to vary the current and linearity
of the HGHL LNA. RBIAS adjusts the current and the linearity of the HGLL and LG LNA.
Downconverter
The mixer requires a DC-blocking capacitor at the input
and pullup inductors at the output. The DC-blocking
capacitors and pullup inductors can be designed to be
part of the matching circuits. See Table 1 for the MODE
settings for various operating modes.
LO Output Buffer
The LO output buffer is internally matched to 50Ω and
includes a DC-blocking capacitor. Enable the buffer by
driving the BUFFEN input high; disable the buffer by
driving the BUFFEN input low. The frequency of the
buffer output is equal to the LO frequency if the LO/2
input is driven low, or equal to the LO frequency divided by two if LO/2 is driven high.
Applications Information
Cascaded LNA/Mixer Performance
The LNA and mixer design optimizes cascaded performance in all gain and linearity modes. In HGHL mode,
both the LNA and mixer have a low noise figure, high
gain, and high linearity. The LNA has high gain to minimize the noise contribution of the mixer, thus increasing
the receiver’s sensitivity, and the LNA has high linearity
for cross-modulation suppression. The HGLL mode is
used when the transmitter is off and cross-modulation
is not a concern. In LG mode, the received signal is
strong enough that linearity is the primary concern. The
LNA gain is reduced to achieve higher system linearity.
S-Parameters
The S-parameters in Tables 2, 3, and 4 can be used to
design the RF matching circuits.
Table 1. Operating Modes
CONTROL
PINS
LG (LO Frequency Undivided)
✓
LO/2
✓
MODE0
HGLL (LO Frequency Undivided)
MODE1
✓
MODE2
HGHL (LO Frequency Undivided)
1
1
1
1
1
0
1
1
✓
0
1
1
1
✓
1
1
1
0
1
0
1
0
✓
✓
✓
LG (LO Frequency Divided by Two)
HGLL MIXER
✓
✓
HGHL MIXER
✓
HGLL (LO Frequency Divided by Two)
LG LNA
HGHL LNA
HGHL (LO Frequency Divided by Two)
MODES
HGLL LNA
LO/2
FUNCTION
LO/1
MAX2335
450MHz CDMA/OFDM LNA/Mixer
✓
✓
✓
✓
✓
✓
✓
0
1
1
0
Shutdown Mode
0
0
0
X
Undefined
1
X
0
X
Undefined
X
1
0
X
6
_______________________________________________________________________________________
450MHz CDMA/OFDM LNA/Mixer
MAX2335
Table 2. MAX2335 LNA S-Parameters in HGHL Mode
FREQUENCY
(MHz)
S11 (dB)
∠S11
(DEGREES)
S21 (dB)
∠S21
(DEGREES)
S12 (dB)
∠S12
(DEGREES)
S22 (dB)
∠S22
(DEGREES)
50
-0.693
-20.000
22.265
2.173
-45.196
-39.133
-0.607
55.183
100
-1.302
-38.600
21.655
-41.256
-37.836
-83.956
-0.532
10.563
150
-1.957
-54.244
20.037
-68.340
-33.411
-107.964
-0.819
-11.252
200
-2.407
-68.840
18.300
-89.560
-31.340
-124.383
-1.051
-26.637
250
-2.656
-82.550
16.860
-105.680
-29.466
-136.021
-1.250
-39.640
300
-2.813
-97.830
15.354
-120.500
-28.422
-147.784
-1.420
-51.424
350
-2.959
-112.274
14.262
-133.400
-26.605
-161.620
-1.492
-63.020
400
-2.953
-127.226
12.926
-144.921
-25.600
-172.633
-1.590
-73.860
410
-2.944
-130.500
12.710
-146.900
-25.519
-174.766
-1.630
-76.200
420
-2.914
-133.724
12.530
-149.125
-25.062
-177.340
-1.628
-78.540
430
-2.876
-136.800
12.439
-151.380
-24.960
-179.138
-1.634
-80.612
440
-2.878
-139.320
12.220
-153.900
-24.780
177.020
-1.650
-82.870
450
-2.884
-142.833
12.000
-155.650
-24.500
176.320
-1.665
-84.900
460
-2.850
-145.863
11.820
-158.324
-24.465
173.850
-1.667
-87.422
470
-2.828
-149.000
11.550
-160.300
-24.239
171.027
-1.697
-89.183
480
-2.828
-159.962
11.343
-161.928
-24.180
169.065
-1.711
-91.480
490
-2.811
-155.360
11.150
-163.540
-23.736
167.483
-1.720
-93.335
500
-2.763
-158.386
11.060
-165.000
-23.568
164.144
-1.718
-95.970
550
-2.628
-174.012
10.298
-174.600
-22.850
152.660
-1.756
-107.020
600
-2.444
169.970
9.810
178.350
-21.890
139.530
-1.770
-117.930
650
-2.230
153.600
9.255
170.400
-21.400
128.572
-1.778
-129.730
700
-1.989
137.420
9.200
162.304
-20.375
117.290
-1.776
-141.100
750
-1.733
121.170
9.164
154.522
-20.230
106.200
-1.828
-152.555
800
-1.464
104.500
9.470
146.813
-19.626
94.020
-1.778
-164.610
850
-1.236
87.855
9.690
135.700
-19.430
83.711
-1.810
-176.805
900
-0.978
73.488
10.432
127.430
-18.654
70.714
-1.860
170.521
950
-0.889
53.876
10.613
112.950
-18.512
59.976
-1.887
158.326
1000
-0.858
36.186
11.417
101.010
-17.839
45.167
-2.033
145.377
_______________________________________________________________________________________
7
MAX2335
450MHz CDMA/OFDM LNA/Mixer
Power-Supply Layout
Matching Network Layout
To minimize coupling between different sections of the
IC, use a star configuration, which has a large decoupling capacitor at a central VCC node. The VCC traces
branch out from this node, each going to a separate
VCC pin of the MAX2335. At the end of each trace is a
bypass capacitor with impedance to ground less than
1Ω at the frequency of interest. This arrangement provides local decoupling at each VCC pin. Use at least
one via per bypass capacitor for a low-inductance
ground connection. Also, connect the exposed paddle
to the PC board GND with multiple vias to provide the
lowest inductance ground connection possible.
The layout of a matching network can be very sensitive
to parasitic circuit elements. To minimize parasitic
inductance, keep all traces short and place components as close to the IC as possible.
Use high-Q components for the LNA input-matching
network to achieve the lowest possible noise figure.
Keep the distance between the differential signal lines
at the mixer outputs constant and make both lines of
equal length to ensure signal balance.
Table 3. MAX2335 Mixer Input Impedance
in HGHL Mode
Table 4. MAX2335 Mixer Output
Impedance (Shunt RC) in HGHL Mode
FREQUENCY (MHz)
8
S11 (dB)
∠S11
(DEGREES)
Chip Information
PROCESS: SiGe
IF FREQUENCY
(MHz)
EQUIVALENT
SHUNT
RESISTANCE
(kΩ)
EQUIVALENT
SHUNT
CAPACITANCE
(pF)
1.21
400
-1.2
77.23
410
-1.229
74.52
420
-1.247
71.7
80
17.7
430
-1.24
69.124
100
16.961
1.21
15.79
1.21
440
-1.24
66.47
120
450
-1.25
63.97
140
14.616
1.21
460
-1.28
61.455
160
13.49
1.21
470
-1.32
58.68
190
11.87
1.21
480
-1.33
55.87
490
-1.35
53.565
500
-1.35
50.87
_______________________________________________________________________________________
450MHz CDMA/OFDM LNA/Mixer
465MHz
BANDPASS
FILTER
V CC
20Ω
0.01µF
3.9pF
V CC
47nH
28
MODE2
MODE1
MODE2
I.C.
N.C.
N.C.
19
4
18
÷2
5
17
6
16
7
15
8
9
10
11
VCC
12
13
RBIAS
IF OUT+
18kΩ
IF_CDMA-
VCC
270nH
IF_CDMA+
1kΩ
100pF
270nH
N.C.
6.8pF
BUFFEN
LO BUFFER
ENABLE
IF OUTVCC
VCC
VCC
VCC
100pF
1000pF
22µF
14
N.C.
MODE1
EP
LO_OUT
DUPLEXER
MODEO
6.8pF
22
20
I.C.
MODEO
LNAIN
23
3
N.C.
6800pF 22nH
24
MAX2335
2
LO_IN
GND
25
26
21
LO/2
RLNA
1
N.C.
24kΩ
DEGEN
27
+
1nH
VCC
100pF
N.C.
0.01µF
LNAOUT
470Ω
MIXIN
18nH
100pF
PA
LO INPUT
PLL INPUT
100pF
CHARGEPUMP OUTPUT
1GHz
VCO
RFPLL
MAX2370
REFERENCE
INPUT
19.2MHz
TCXO
_______________________________________________________________________________________
9
MAX2335
Typical Application Circuit
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information
go to www.maxim-ic.com/packages.)
QFN THIN.EPS
MAX2335
450MHz CDMA/OFDM LNA/Mixer
D2
D
MARKING
b
CL
0.10 M C A B
D2/2
D/2
k
L
AAAAA
E/2
E2/2
CL
(NE-1) X e
E
DETAIL A
PIN # 1
I.D.
E2
PIN # 1 I.D.
0.35x45°
e/2
e
(ND-1) X e
DETAIL B
e
L1
L
CL
CL
L
L
e
e
0.10 C
A
C
0.08 C
A1 A3
PACKAGE OUTLINE,
16, 20, 28, 32, 40L THIN QFN, 5x5x0.8mm
-DRAWING NOT TO SCALE-
10
21-0140
______________________________________________________________________________________
I
1
2
450MHz CDMA/OFDM LNA/Mixer
COMMON DIMENSIONS
EXPOSED PAD VARIATIONS
PKG.
16L 5x5
20L 5x5
28L 5x5
32L 5x5
40L 5x5
SYMBOL MIN. NOM. MAX. MIN. NOM. MAX. MIN. NOM. MAX. MIN. NOM. MAX. MIN. NOM. MAX.
A
A1
A3
b
D
E
e
PKG.
CODES
0.70 0.75 0.80 0.70 0.75 0.80 0.70 0.75 0.80 0.70 0.75 0.80 0.70 0.75 0.80
0
0.02 0.05
0
0.02 0.05
0
0.02 0.05
0
0.02 0.05
0
E2
exceptions
MIN. NOM. MAX.
±0.15
T1655-2
3.00
T1655-3
3.00
T1655N-1 3.00
T2055-3
3.00
3.00
T2055-4
T2055-5
3.15
T2855-3
3.15
T2855-4
2.60
T2855-5
2.60
3.15
T2855-6
T2855-7
2.60
T2855-8
3.15
T2855N-1 3.15
T3255-3
3.00
T3255-4
3.00
T3255-5
3.00
T3255N-1 3.00
T4055-1
3.20
0.02 0.05
0.20 REF.
0.20 REF.
0.20 REF.
0.20 REF.
0.20 REF.
0.25 0.30 0.35 0.25 0.30 0.35 0.20 0.25 0.30 0.20 0.25 0.30 0.15 0.20 0.25
4.90 5.00 5.10 4.90 5.00 5.10 4.90 5.00 5.10 4.90 5.00 5.10 4.90 5.00 5.10
4.90 5.00 5.10 4.90 5.00 5.10 4.90 5.00 5.10 4.90 5.00 5.10 4.90 5.00 5.10
0.50 BSC.
0.40 BSC.
0.65 BSC.
0.50 BSC.
0.80 BSC.
- 0.25 0.35 0.45
0.25 - 0.25 - 0.25 - 0.25
0.30 0.40 0.50 0.45 0.55 0.65 0.45 0.55 0.65 0.30 0.40 0.50 0.40 0.50 0.60
L1
0.30 0.40 0.50
40
N
20
28
32
16
ND
10
5
7
8
4
10
5
7
8
4
NE
----WHHC
WHHD-1
WHHD-2
WHHB
JEDEC
k
L
NOTES:
1. DIMENSIONING & TOLERANCING CONFORM TO ASME Y14.5M-1994.
2. ALL DIMENSIONS ARE IN MILLIMETERS. ANGLES ARE IN DEGREES.
3. N IS THE TOTAL NUMBER OF TERMINALS.
L
D2
MIN. NOM. MAX.
3.10
3.10
3.10
3.10
3.10
3.25
3.25
2.70
2.70
3.25
2.70
3.25
3.25
3.10
3.10
3.10
3.10
3.30
3.20
3.20
3.20
3.20
3.20
3.35
3.35
2.80
2.80
3.35
2.80
3.35
3.35
3.20
3.20
3.20
3.20
3.40
3.00
3.00
3.00
3.00
3.00
3.15
3.15
2.60
2.60
3.15
2.60
3.15
3.15
3
3.00
3
3.00
3.00
3.00
3.20
3.10
3.10
3.10
3.10
3.10
3.25
3.25
2.70
2.70
3.25
2.70
3.25
3.25
3.10
3.10
3.10
3.10
3.30
3.20
3.20
3.20
3.20
3.20
3.35
3.35
2.80
2.80
3.35
2.80
3.35
3.35
.20
.20
3.20
3.20
3.40
**
**
**
**
**
0.40
**
**
**
**
**
0.40
**
**
**
**
**
**
DOWN
BONDS
ALLOWED
YES
NO
NO
YES
NO
YES
YES
YES
NO
NO
YES
YES
NO
YES
NO
YES
NO
YES
** SEE COMMON DIMENSIONS TABLE
4. THE TERMINAL #1 IDENTIFIER AND TERMINAL NUMBERING CONVENTION SHALL
CONFORM TO JESD 95-1 SPP-012. DETAILS OF TERMINAL #1 IDENTIFIER ARE
OPTIONAL, BUT MUST BE LOCATED WITHIN THE ZONE INDICATED. THE TERMINAL #1
IDENTIFIER MAY BE EITHER A MOLD OR MARKED FEATURE.
5. DIMENSION b APPLIES TO METALLIZED TERMINAL AND IS MEASURED BETWEEN
0.25 mm AND 0.30 mm FROM TERMINAL TIP.
6. ND AND NE REFER TO THE NUMBER OF TERMINALS ON EACH D AND E SIDE RESPECTIVELY.
7. DEPOPULATION IS POSSIBLE IN A SYMMETRICAL FASHION.
8. COPLANARITY APPLIES TO THE EXPOSED HEAT SINK SLUG AS WELL AS THE TERMINALS.
9. DRAWING CONFORMS TO JEDEC MO220, EXCEPT EXPOSED PAD DIMENSION FOR
T2855-3 AND T2855-6.
10. WARPAGE SHALL NOT EXCEED 0.10 mm.
11. MARKING IS FOR PACKAGE ORIENTATION REFERENCE ONLY.
12. NUMBER OF LEADS SHOWN ARE FOR REFERENCE ONLY.
13. LEAD CENTERLINES TO BE AT TRUE POSITION AS DEFINED BY BASIC DIMENSION "e", ±0.05.
-DRAWING NOT TO SCALE-
PACKAGE OUTLINE,
16, 20, 28, 32, 40L THIN QFN, 5x5x0.8mm
21-0140
I
2
2
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 11
© 2005 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products, Inc.
MAX2335
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information
go to www.maxim-ic.com/packages.)