MAAM-007805 Broadband CATV Single Ended 2-Way Active Splitter 50 - 1100 MHz Features • • • • • • • • • 2-Way Splitter, 8.5 dB Gain Single Ended Input and Outputs 75 Ω Impedance 4.0 dB Noise Figure Single +5 Volt Supply Lead-Free 3 mm 12-Lead PQFN Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible Rev. V1 Functional Schematic N/C N/C N/C N/C OUT1 IN Description and Applications M/A-COM’s MAAM-007805 CATV 2-way active splitter is a GaAs MMIC which exhibits low noise figure and distortion in a lead-free PQFN plastic package. The MAAM-007805 employs a low noise, high linearity amplifier and power splitter functionality. The design features 75 Ω input and outputs. M/A-COM Products N/C N/C OUT2 N/C N/C N/C Pin Configuration 3 The MAAM-007805 is ideally suited for multi-tuner set top boxes, home gateways, and other broadband internet based appliances. Pin No. Function Pin No. Function 1 No Connection 7 RF Output 2 2 RF Input 8 No Connection The MAAM-007805 is fabricated using M/A-COM’s PHEMT process to realize low noise and low distortion. The process features full passivation for robust performance and reliability. 3 No Connection 9 RF Output 1 4 No Connection 10 No Connection 5 No Connection 11 No Connection 6 No Connection 12 No Connection 3. The exposed pad centered on the package bottom must be connected to RF and DC ground. Ordering Information 1,2 Part Number Package MAAM-007805-TR1000 1000 piece reel MAAM-007805-TR3000 3000 piece reel Parameter Absolute Maximum MAAM-007805-001SMB Sample Board, 50 - 1100 MHz Tuning Max Input Power +8 dBm Vbias +10.0 V Operating Temperature -40°C to +85°C Storage Temperature -65°C to +125°C 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. Absolute Maximum Ratings 4,5 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for • North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or volume is not guaranteed. information contained herein without notice. MAAM-007805 Broadband CATV Single Ended 2-Way Active Splitter 50 - 1100 MHz M/A-COM Products Rev. V1 Electrical Specifications: F = 50 - 1000 MHz, TA = 25°C, VDD = +5 Volts, Z0 = 75 Ω Parameter Gain Gain Flatness Noise Figure Input Return Loss Output Return Loss Composite Triple Beat, CTB Composite Second Order, CSO Crossmodulation, XMOD Reverse Isolation Output to Output Isolation P1dB OIP3 Test Conditions In to Out1, In to Out2 In to Out1, In to Out2 In to Out1, In to Out2 Input Output 132 channels, +15 dBmV/channel at the input. 132 channels, +15 dBmV/channel at the input. 132 channels, +15 dBmV/channel at the input. Out1 to In, Out2 to In Out1 to Out2 400 MHz Two tones at 1 MHz spacing, Pin at –10 dBm per tone 400 MHz Two tones at 1 MHz spacing, Pin at –10 dBm per tone 400 MHz VDD = + 5 Volts OIP2 IDD Schematic PWB Layout Units dB dB dB dB dB dBc dBc dBc dB dB dBm Min. 7.3 — — — — — — — — — — Typ. 8.5 0.75 4.0 19 18 -75 -60 -60 20 25 17 Max. 9.5 1.2 4.5 — — — — — — — — dBm — 33 — dBm — 55 — mA — 100 120 Recommended PCB Configuration Off-Chip Component Values 6 Component Value Package C1- C7 0.01 µF 0402 L1 4.7 nH 0402 L2 - L3 7.5 nH 0402 L4 - L5 1.0 µH 1210 L6 18 nH 0402 R1 - R2 560 ohms 0402 R3 - R4 91 ohms 0402 6. L4 and L5 supplied from EPCOS, part number B82422A1102K100. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for • North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or volume is not guaranteed. information contained herein without notice. MAAM-007805 Broadband CATV Single Ended 2-Way Active Splitter 50 - 1100 MHz M/A-COM Products Rev. V1 Typical Performance Curves Gain vs. Frequency over Temperature to 3 GHz Gain vs. Frequency over Temperature 10 10.0 9.5 5 9.0 8.5 0 8.0 -5 7.5 +25°C -40°C +85°C 7.0 +25°C -40°C +85°C -10 6.5 6.0 -15 0 220 440 660 880 1100 0 500 Frequency (MHz) 1000 1500 2000 2500 3000 Frequency (MHz) S11 vs. Frequency over Temperature S22 vs. Frequency over Temperature 0 0 +25°C -40°C +85°C -12 +25°C -40°C +85°C -12 -24 -24 -36 -36 -48 -48 -60 -60 0 220 440 660 880 0 1100 220 Frequency (MHz) 440 660 880 1100 Frequency (MHz) Isolation vs. Frequency over Temperature Noise Figure 7 0 +25°C -40°C +85°C -12 OUT1_+25°C OUT2_+25°C 6 5 -24 4 -36 3 -48 2 1 -60 0 220 440 660 Frequency (MHz) 880 1100 0 220 440 660 880 1100 Frequency (MHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for • North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or volume is not guaranteed. information contained herein without notice. MAAM-007805 Broadband CATV Single Ended 2-Way Active Splitter 50 - 1100 MHz M/A-COM Products Rev. V1 Lead-Free 3 mm 12-Lead PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for • North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or volume is not guaranteed. information contained herein without notice.