Preliminary SF1111A • • • • • Designed for CDMA2000 BTS Applications Simple External Impedance Matching Hermetic SMP-97 Surface-Mount Case Unbalanced Input and Output Complies with Directive 2002/95/EC (RoHS) 160 MHz SAW Filter Pb Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +10 dBm Max. DC voltage between any 2 terminals 30 VDC Storage Temperature Range -40 to +85 Suitable for lead-free soldering - Max. Soldering Profile °C 260°C for 30 s SMP-97 Electrical Characteristics Characteristic Nominal Center Frequency Passband Sym fC Insertion Loss at fc 1.5 dB Passband 3 db Passband Notes 1 Min 1, 2 ±590 Typ 160.000 Max Units MHz 9 11.0 dB IL BW1.5 BW3 Amplitude Ripple over fc±470 kHz Phase Linearity over fc ±590 kHz Rejection fc-10.0 to fc-1.25 and fc+1.25 to fc+10.0 MHz Operating Temperature Range TA 1 dB 2 5 °rms dB +70 -20 °C External L-C SMP-97 24.6 x 9 mm Nominal Footprint Lid Symbolization (YY = year, WW = week) Notes: 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." 5. The design, manufacturing process, and specifications of this filter are subject to change. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 7. US and international patents may apply. 8. Electrostatic Sensitive Device. Observe precautions for handling. RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. 1.0 50 Impedance Matching to 50 Ω Unbalanced Case Style 0.7 40 1, 2, 3 fc-20 to fc-10.0 and fc+10.0 to fc+20 MHz kHz ±750 RFM SF1111A YYWW Electrical Connections Connection Terminals Port 1 Hot 10 Port 1 Gnd Return 1 Port 2 Hot 5 Port 2 Gnd Return Case Ground E-mail: [email protected] http://www.rfm.com SF1111A-121504 6 All others Page 1 of 3 160 MHz SAW Filter RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com SF1111A-121504 Page 2 of 3 160 MHz SAW Filter SMP-97 Case 10-Terminal Ceramic Surface-Mount Case 24.6 x 9 mm Nominal Footprint Case Dimensions Dimension Min 24.41 8.80 A B C D E H M N P mm Nom 24.64 8.99 1.75 2.29 1.02 1.0 4.83 3.40 1.905 Max 24.94 9.30 2.00 Min 0.961 0.349 Inches Nom 0.970 0.354 0.069 0.090 0.040 0.039 0.190 0.134 0.075 Max 0.982 0.366 0.079 Electrical Connections Materials Connection Solder Pad Termination Au plating 30 - 60 uInches (76.2-152 uM) over 80200 uInches (203-508 uM) Ni. Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phosphorus) 100-200 uInches Thick Body Port 1 Port 2 Al2O3 Ceramic Terminals Input or Return 10 Return or Input 1 Output or Return 5 Return or Output 6 Ground Pb Free All others Single Ended Operation Return is ground Differential Operation C B D Return is hot N H M A 6 5 5 6 7 4 4 7 8 3 3 8 9 2 2 9 10 1 1 10 P (8 Places) E (10 Places) TOP VIEW BOTTOM VIEW RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com SF1111A-121504 Page 3 of 3