DSTINIs400/DSTINIs-00x Sockets Evaluation Board www.maxim-ic.com GENERAL DESCRIPTION FEATURES ® The TINI sockets boards are motherboards designed to host the corresponding TINI evaluation module. The combination of the two boards allows full evaluation of the features of the target microprocessor. To evaluate the DS80C400, order both a DSTINIm400 and a DSTINIs400. Although various boards support different evaluation modules, the most popular is the DSTINIs400. It includes a 144-pin SODIMM connector and provides ® 1-Wire , CAN2.0B, serial, and a 10/100 Ethernet PHY for connecting the TINIm400 to the physical world. The DSTINIm400 and DSTINIs400 are fully assembled and tested circuit boards. When used together they form a complete evaluation system for the DS80C400 network microcontroller. The DSTINIm400 module includes the DS80C400 network microcontroller, a real-time clock, 1MB flash, 1MB static RAM, and support for an external Ethernet PHY for connecting to a wide variety of networks. The circuit board is designed as a module to be plugged into the 144-pin SODIMM connector on the DSTINIS400. § Hosts the TINI Runtime Environment in Validated Hardware Design (in Conjunction with the DSTINIm400) § 10/100 Base-T Ethernet Port § Two Serial Ports § Dual 1-Wire Network Ports § CAN2.0B Port § 5.0V Single-Supply Operation (DSTINIm400) § Fully Assembled and Tested Design ORDERING INFORMATION Detailed information about the initial setup process and use of the TINI platform is contained in Application Note 612: Getting Started with the TINIm400 (DS80C400) Verification Module. PART INPUT VOLTAGE* USED WITH MODULE DSTINIs400 5V DC regulated DSTINIm400 12cm x 10cm DSTINIs-005 5V DC regulated DSTINI1-1MG, DSTINI1-512 16cm x 10cm DSTINIs-006 9V to 18V DC DSTINI1-1MG, DSTINI1-512 16cm x 10cm DIMENSIONS *The user must supply an external power supply. TINI and 1-Wire are registered trademarks of Dallas Semiconductor. COMPONENT LIST 1 of 11 DESIGNATION QTY DESCRIPTION C1 1 47pFcapacitor (1206) C2, C4–C6 C3, C7, C9, C13, C15, C26, C28, C30, C38 C12, C14, C17, C19, C25, C27, C29, C33, C37 C8 C10, C31, C32, C34–C36 C11 4 47mF capacitors (1206) 9 100nF capacitors (1206) 9 10nF capacitors (1206) 1 220nF capacitor (1206) 6 1.0mF capacitors (1206) 1 4.7mF capacitor (1206) REV: 110603 DSTINIs400/DSTINIs-00x Sockets Evaluation Board COMPONENT LIST (continued) DESIGNATION QTY C16, C18 2 DESCRIPTION 270pF capacitor (1206) 1nF, 2kV thru-hole capacitors 27pF capacitors (1206) 1N5908 D0-201 BAT54 SOT-23 SODIMM144 Hirose SX6E-144S-0.8SH 2.5mm center, 5.5mm outside barrel connector RJ-45 modular jack 3 x 1-pin headers, 0.1 centers DB9 serial female DB9 serial male Pad jumper RJ11 modular jack C20–C22 3 C23, C24 D1 D2 2 1 1 J1 1 J2 1 J7 1 J9–J11 3 J12 J13 J14 J16 L1 1 1 1 1 1 R1 R2 R4–R7, R8, R10–R12 R13, R9 1 1 205kW, ±1% resistor (1206) 121kW, ±1% resistor (1206) 8 49.9W, ±1% resistors (1206) 2 47W resistor (1206) R14 1 22.1kW, ±1% resistor (1206) R15, R17, R18 R16 R19 3 1 1 220W resistors (1206) 10kW resistor (1206) Pad jumper DESIGNATION QTY DESCRIPTION R20 1 47kW resistor (1206) R21 R22, R23 1 2 124W, ±1% resistor (1206) 1kW resistor (1206) R24 1 10kW resistor (1206) BelFuse S558-5999-T7 T1 1 transformer MAX1692 PWM step-down U1 1 regulator Intel LXT972ALC Ethernet U3 1 PHY U4–U6 3 Dialight 597-7741 LED U7 1 MAX560CAI transceiver DS2480B serial 1-Wire line U8 1 driver DS9502 ESD protection U9 1 diode Y1 1 25.000MHz, HC49 Ferrite Bead, Fair-Rite Z1–Z3 3 2512067007Y3 UNPOPULATED COMPONENTS ® J15 1 DS9094F iButton Clip J18, J28–J30 1 Not used MAX1792EUA18 linear U2 1 regulator DS2408 1-Wire 8-channel U10 1 addressable switch U12 1 Not used 22mH inductor JUMPERS (DSTINIS400) 10/100Mb Ethernet Jumper (J10) Network Boot Jumper (J3) JUMPER 1–2 CONFIGURATION DS80C400 attempts to boot through Ethernet using DHCP and TFTP JUMPER 1–2 2–3 Quiet Boot Jumper (J5) JUMPER 1–2 Full Duplex Jumper (J11) CONFIGURATION JUMPER DS80C400 boots without sending loader information to serial port. 1–2 2–3 Auto Negotiation Jumper (J9) JUMPER CONFIGURATION 100Mb Ethernet operation. 10Mb Ethernet operation. CONFIGURATION Ethernet is configured for full-duplex operation. Ethernet is configured for half-duplex operation. CONFIGURATION 1–2 Auto-negotiation disabled. 2–3 Auto-negotiation enabled. DTR Reset Jumper (J11) JUMPER 1–2 iButton is a registered trademark of Dallas Semiconductor. 2 of 11 CONFIGURATION DTR reset is used for communication with the DS80C400 loader application. DSTINIs400/DSTINIs-00x Sockets Evaluation Board PIN HEADERS CONNNECTOR DESCRIPTION J18 Recreated I/O Port. Latched from 1-Wire bus. Requires installation of DS2408. See schematic. J20 CAN Bus. See schematic for pinout. J21 J27 SPI™ Bus. See schematic for pinout. Alternately provides connection to P5.4–P5.7 2 I C™ Bus. See schematic for pinout. Alternately provides connection to P1.0 and P1.1. J28 Unused. No user-accessible pins available. J29 Unused. No user-accessible pins available. J30 Unused. No user-accessible pins available. QUICK START Recommended Equipment The sockets board requires an external power supply and cables as needed to access the desired features of the board. The 5V DC power supply is mandatory, but the other cables are required only if that feature is to be used. The specific example shown here is for a TINIm400/TINIs400 system. Hardware: 5V DC Power Supply Input Voltage: per customer requirements Output Voltage: 5V DC ±10% Output Current: >150mA Polarization: Positive Center Output Plug Type: 2.5mm I.D. x 5.5mm O.D. x 12mm Female (P-6) Example: Digi-Key (www.digikey.com) part number T309-P6P-ND (110V input), 5V DC power Ethernet Cable: Note: There are two types of Ethernet cable. For connection to a router or hub, use a standard "straight-through" Ethernet cable. For direct connection to an Ethernet port on the back of a PC, use a "crossover" Ethernet cable. A crossover cable is specially made for two-computer networking. These cables can be purchased from almost any computer or electronics store. Example (straight-through): Radio Shack (www.radioshack.com) Cat 5E (3ft) Network Cable, part number 2781763 Example (crossover): Radio Shack Cat 5E (3m) Crossover Cable, part number 278-2011 RS-232C Serial Cable (DB9 Male to DB9 Female): This cable is straight-through, not a null-modem (crossover). These cables can be purchased from any computer or electronics store. SPI is a trademark of Motorola, Inc. I2C is a trademark of Philips Corp. Purchase of I2C components of Maxim Integrated Products, Inc., or one of its sublicensed Associated Companies, conveys a license under the Philips I2C Patent Rights to use these components in an I2C system, provided that the system conforms to the I2C Standard Specification as defined by Philips. 3 of 11 DSTINIm400/DSTINIs-00x Sockets Evaluation Board MORE INFORMATION TINI platform details can be found at www.maxim-ic.com/TINI. The TINI Specification and Developer’s Guide (Addison-Welsey, 2001) is an invaluable resource when developing with the TINI platform. Download a free copy from our website at www.maxim-ic.com/TINIguide. Additional Resources For detailed information about the initial setup and use of the TINI platform, refer to Application Note 612: Getting Started with the TINIm400 (DS80C400) Verification Module at www.maxim-ic.com/appnoteindex. DS80C400 network microcontroller data sheet: www.maxim-ic.com/DS80C400 Microcontroller Website: www.maxim-ic.com/microcontrollers 4 of 11 nPCE2 P52 P51 P50 A18 nC E2 nC E1 nC E0 P67 P66 A21 nC E7 nC E6 nC E5 nC E4 nC E3 P 1[7:0] nPCE3 P33 nPCE0 P 3[3:0] P31 P53 P32 nPCE1 P 5[3:0] P30 P 6[7:6] R xD0 R xD1 R xD2 R xD3 n R stIn TxClk R x C lk n R s t O ut TxD3 TxD2 TxD1 TxD0 TxEn CRS TxEn C OL RxEr R xDV MDC M D IO TxClk A1 P12 P16 P11 P17 P10 n R s t O ut T x D [3:0] A2 P13 R x C lk A3 P15 RxDV D0 P14 RxEr D [7:0] A0 D1 R x D [3:0] n P S En A17 A20 A19 D2 MDC A16 D6 D7 D5 D3 D4 M D IO n R stIn C OL CRS V33 DIMM144 n PCE[3:0] ALE nWr nRd V50 n C E [7:3] Local1W 1 7 Rev B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 VCC3 J1 T I N I m 4 0 0 S o c k e t B o a r d : T I N I M o d u l e Connector Do cument Number TINIs400 M o n d a y , M a r c h 0 4 , 2 002 Copyright (C) 2003 Dallas Semiconductor / Maxim T itle Size B Date: GND1 GND2 VCC3 VCC4 A13 nRstIn A16 nRam2En A15 A8 A14 A9 A17 A11 A20 nPSEN A19 A10 D6 D7 D5 D3 D4 nFlashEn D2 A0 D1 A4 D0 P1.4 A3 P1.5 A2 nRam1En A1 P1.3 A12 P1.2 P1.6 P1.1 P1.7 P1.0 nRstOut nEA CRS TxEn COL RxEr RxDV MDC MDIO GND52 GND53 TxD.3 TxD.2 TxD.1 TxD.0 GND58 GND59 TxClk RxClk GND62 GND63 RxD.0 RxD.1 RxD.2 RxD.3 GND68 GND69 NC70 P3.0 ALE P3.1 P5.3 P3.2 nPCE1 NC77 nPCE3 P3.3 nPCE0 NC81 nPCE2 nWr NC84 nRd NC86 P5.2 NC88 NC89 NC90 NC91 NC92 NC93 NC94 P5.1 P5.0 A18 nCE3 nCE2 nCE1 nCE0 P6.7 P6.6 A21 nCE7 nCE6 nCE5 nCE4 A5 NC109 A6 NC112 A7 NC114 NC115 Local1W NC117 vPullup NC119 NC120 NC121 NC122 NC123 NC124 NC125 NC126 NC127 NC128 NC129 NC130 NC131 NC132 NC133 NC134 NC135 NC136 NC137 NC138 NC139 NC140 VCC141 VCC142 GND143 GND144 V CC5 V50 V33 U1 1 L1 IN LX Z1 V CC3 9 ! 22 uH 8 J2 C3 1 2 3 0.1 uF + Bead C1 R1 SHDN 47 pF C2 205K 1% 7 47uF SYNC/PWM FB + 5 C4 47uF REF 6 LIM 0.22 uF 10 3 C8 GND 1N5908 D1 87-72010-004 C5 + 47uF C6 47uF C7 0.1 uF R2 121K 1% PGND 4 + BP 2 MAX1692 C9 0.1 uF V33 U2 C 10 1 .0uF 1 2 3 4 IN1 IN2 RST SHDN OUT1 OUT2 SET GND P53 8 7 6 5 V18 J3 1 2 2Pin C 11 4 .7uF VCC3 " MAX1792 E U A 1 8 J4 nExtInt P32 1 2 3 3Pin VCC3 P17 J5 1 2 2Pin Q1 P52 J6 BSS84 R3 10 K 3 2 1 Copyright (C) 2003 Dallas Semiconductor / Maxim Title T I N I m 4 0 0 S o c k e t B o a r d : P o wer and Internals 3Pin Size A D ate: Docume nt Number TINIs400 M o n d a y , M a r c h 0 4, 2002 Rev B 2 7 Z2 Z3 TxD3 TxD2 TxD1 TxD0 T x D [ 3 :0] R 1 3 47 RxDV RxClk RxEr Rx D3 Rx D2 Rx D1 Rx D0 RxD[3: 0] MDC M DIO COL CRS nRstOut R 16 VCC3 49 52 53 45 46 47 48 RX_DV RX_CLK RX_ER RXD3 RXD2 RXD1 RXD0 43 42 62 63 3 64 4 39 MDC MDIO COL CRS MDDIS MDINT RESET PWRDWN 5 6 12 SLEW0 SLEW1 ADDR0 R4 4 9 .9 1% 49.9 1% R8 TPIP TPIN TX_EN TX_CLK TX_ER TXD3 TXD2 TXD1 TXD0 23 24 TPOP TPON 19 20 LED_CFG1 LED_CFG2 LED_CFG3 38 37 36 U3 49.9 1% LXT972A L C 7 11 13 14 15 16 18 32 25 26 41 50 61 R7 4 9.9 1% R J -45 1 15 2 14 11 3 6 R 11 R 12 10 7 49.9 1% 49.9 1% 9 8 S558 _ 5 9 9 9 _ T 7 C 20 0.001 uF, 2 kV C 22 C 21 C 19 0.01 uF 0.001 uF, 2 kV 1 0.001 uF, 2 kV J8 Pad 17 22.1 K 1 % PAUSE 33 TDI TDO TMS TCK TRST 27 28 29 30 31 XI XO R6 4 9 .9 1% 16 R 14 RBIAS R5 4 9 .9 1% 1 2 3 4 5 6 7 8 T1 0.01 uF C 17 R 10 C 18 270 pF GND1 GND2 GND3 GND4 GND5 GND6 GND7 GND8 GND9 GND10 GND11 GND12 GND13 10 K J7 C 15 0.1 uF C 16 270 pF U4 R 15 220 VCC3 1 2 4 3 J9 &' 1 2 3 3 Pin 597-7741 U5 1 2 R 17 Y1 220 TEST0 TEST1 56 55 54 60 59 58 57 C 14 0.01 uF VCC3 1 2 4 3 J10 &' 1 2 3 3 Pin 597-7741 25.000 M H z 34 35 47 VCCD VCCIO1 VCCIO2 R9 TxEn TxClk BEAD 21 22 0.1 uF VCCA1 VCCA2 0.01 uF % VCC3 51 C 13 8 40 C 12 #$ ##% & BEAD C 23 C 24 27 pF 27 pF U6 R 18 220 VCC3 1 2 4 3 J11 &' 1 2 3 3 Pin VCC3 597-7741 C 25 0.01 uF C 26 0.1 uF C 27 0.01 uF C 28 0.1 uF C 29 0.01 uF Copyright (C) 2003 Dallas Semiconductor / Maxim C 30 0.1 uF R 19 0 Ohm Title T I N I m 4 0 0 S o c k e t B o a r d : E t h ernet Size A D ate: Docume nt Number TINIs400 M o n d a y , M a r c h 0 4, 2002 Rev B 3 7 J12 nShDn VCC3 C 32 1 uF C 35 1 uF P67 P30 P33 DTR4 6 T2IN T2OUT 3 D T R 4 _ 2 32 RTS4 20 T3IN T3OUT 1 RTS4_232 TX4 21 T4IN T4OUT 28 RX0 8 R1OUT R1IN 9 5 R2OUT R2IN 4 RX4 26 R3OUT R3IN 27 CTS4 22 R4OUT R4IN 23 DC D4 19 R5OUT R5IN 18 C 36 1 uF D B 9 F E M A L E (DCE) RX4_232 J13 D CD4_232 TX4_232 R 20 + J14 # C22 U7 MAX560CAI 1 2 3 4 5 6 7 8 9 16 + 15 C2+ 24 25 EN SHDN 11 VCC 13 V+ T1OUT 10 P14 14 T1IN DTR0 P66 C 33 0.01uF 1 uF V- P16 C 31 7 17 P15 + TX0 GND P31 C1- C1+ 12 + + C 34 1 uF TX0_232 RX0_232 D T R 0 _ 2 32 CTS4_232 47K PAD JUMPER 1 2 3 4 5 6 7 8 9 D B 9 M A L E ( D T E) n R s tIn Copyright (C) 2003 Dallas Semiconductor / Maxim Title T I N I m 4 0 0 S o c k e t B o a r d : I n t e r n a l S e r i a l Ports 0 and 4 Size A D ate: Docume nt Number TINIs400 M o n d a y , M a r c h 0 4, 2002 Rev B 4 7 J15 % DS9094F Local1 W VCC5 D2 BAT54 7 TXD RX1 8 RXD J17 DS2480B VDD TX1 0.1 uF VPP 5 OWIO 2 NC 3 J16 U9 XOWIO 1 C1 3 NC1 2 A1 C2 6 NC2 4 A2 5 1 2 3 4 5 6 RJ11 DS9502 n E x t I nt VCC5 " % Pad Jumper 4 C 39 47uF 1 15 16 NC1 NC15 NC16 GND + OWIO DS2408 J18 3 U 10 VCC P12 POL VCC5 P0 P1 P2 P3 P4 P5 P6 P7 2 14 13 12 11 9 8 7 STRB 10 1 2 3 4 5 6 7 8 9 10 11 ( $ & 11x1 5 P13 6 GND 0.01 uF C 38 1 U8 4 C 37 Copyright (C) 2003 Dallas Semiconductor / Maxim Title TINIm400 Socket Board: External 1-Wire Interface and DS2408 Size A D ate: Docume nt Number TINIs400 M o n d a y , M a r c h 0 4, 2002 Rev B 5 7 J19 VCC3 C 40 0.1 uF R 21 TXD C0RX 4 RXD 5 VREF VCC 1 2 P51 C0TX J20 1 2 3 4 5 6 7 8 9 10 124 CANH 7 CANL 6 RS 8 GND P50 3 U 11 VCC5 5x2 SN65HVD230 V50 VCC5 n P CE[3:0] nPCE0 nPCE1 nPCE2 nPCE3 1 3 5 7 J21 4x2 2 4 6 8 V33 VCC3 VCC3 J22 J23 VCC5 J24 J25 J26 nShDn R 22 1 K R 23 1 K VCC5 J27 Pad Jumper R 24 P10 SDA 1 2 3 4 V33 SC LK D3 VCC5 1 2 D4 3 P11 3 10K 1 BAT54 S 4 H E A D E R PINS, 0.1" VCC5 2 BAT54 S Copyright (C) 2003 Dallas Semiconductor / Maxim Title TINIm 400 Socket Board: Other I/O Size A D ate: Docume nt Number TINIs400 M o n d a y , M a r c h 0 4, 2002 Rev B 6 7 V33 100nF 100nF 100nF 100nF 100nF 100nF One 100 nF ceramic capacitor for each U12 V33 connection nPSEn U IO0 U IO1 D7 D6 D5 D4 D3 D2 D1 D0 nWr nCE7 nCE6 nCE5 nCE4 nCE3 V33 ALE U IO2 U IO3 C 49 C 45 100nF 100nF UIO17 UIO16 XIO6 XIO5 UIO15 XIO4 UIO17 UIO18 UIO19 UIO20 UIO21 UIO22 UIO23 UIO24 UIO25 UIO26 UIO27 UIO28 UIO29 UIO30 UIO31 UIO32 UIO14 UIO13 XIO3 UIO12 V18 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 U IO0 U IO1 U IO2 U IO3 U IO4 U IO5 U IO6 U IO7 U IO8 U IO9 UIO10 UIO11 UIO12 UIO13 UIO14 UIO15 UIO16 UIO21 XIO7 UIO20 UIO19 UIO18 UIO11 UIO10 XIO2 U IO9 U IO8 V33 U IO7 U IO6 V18 C 50 C 51 C 52 10nF 10nF 10nF U IO4 C 54 10nF 10nF A [ 3 :0] J30 1 3 5 7 8Pin A [ 2 1 : 1 6] One 10 nF ceramic capacitor for each U12 V18 connection 2 4 6 8 One 10 nF ceramic capacitor for each U12 V33 connection C 55 C 56 C 57 10nF 10nF 10nF TDO n E x t I nt P53 P17 V33 J28 40 Pin dual XIO1 C 53 U IO5 XIO0 XIO0 XIO1 XIO2 XIO3 XIO4 XIO5 XIO6 XIO7 XIO8 XIO9 XIO10 XIO11 XIO12 XIO13 XIO14 XIO15 A16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 U 12 XC2C64-7VQ100C A3 A2 A1 J29 C 44 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 10nF 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 GND4 IO74 IO73 IO72 IO71 IO70 GND3 IO68 IO67 IO66 IO65 IO64 IO63 GND2 IO61 IO60 IO59 IO58 V18b IO56 IO55 IO54 IO53 IO52 VIO2 A0 n C E [ 7 :3] IO1 IO2 IO3 IO4 VAUX IO6 IO7 IO8 IO9 IO10 IO11 IO12 IO13 IO14 IO15 IO16 IO17 IO18 IO19 Vxx GND21 IO22 IO23 IO24 GND A21 A20 A19 A18 A17 D [ 7 :0] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 GND6 IO99 VIO4 IO97 IO96 IO95 IO94 IO93 IO92 IO91 IO90 IO89 VIO3 IO87 IO86 IO85 GND5 TDO IO82 IO81 IO80 IO79 IO78 IO77 IO76 C 48 V18a IO27 IO28 IO29 IO30 GND1 IO32 IO33 IO34 IO35 IO36 IO37 VIO1 IO39 IO40 IO41 IO42 IO43 IO44 TDI IO46 TMS TCK IO49 IO50 C 47 One 100 nF ceramic capacitor for each U12 V18 connection 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 nRstOut C 46 nRd TDO XIO9 UIO26 XIO8 UIO25 UIO24 UIO23 UIO22 C 43 XIO12 XIO11 XIO10 C 42 UIO32 XIO15 XIO14 UIO31 XIO13 UIO30 UIO29 UIO28 UIO27 V18 C 41 Copyright (C) 2003 Dallas Semiconductor / Maxim Title P r o g r a m m a b l e I/O Size A Docume nt Number DSTINIs400 Rev B 20 Pin dual D ate: M o n d a y , M a r c h 0 4, 2002 7 7