TEDEA - HUNTLEIGH Model 600 Series S Type Load Cells Model 601 and 616 tension compression load cells are available in aluminum alloy (601) or stainless steel (616). Model 616 features stainless steel construction, IP67 environmental protection, 6 wire (sense) circuit, and a unique humidity-resistant protective coating. It is ideal for harsh environmental, high accuracy applications. Ideally suited for lever conversions, hopper/tanks and vibratory feeders general process weighing and force measurement applications. · Capacities: 50 - 100 kg (110.23 - 220.46 lbs) · Stainless steel (616) or aluminum (601) · Tension or compression applications · Suitable for hanging scales · Ideal for conversion of mechanical to electronic scales · Meets Handbook 44, OIML R60 and other international standards Model 616 features aluminum alloy construction, IP 65 environmental protection and 4 wire circuit. It is ideal for lower cost, high accuracy applications. Tedea-Huntleigh, with models ranging from 2 to 50,000 is the worlds largest manufacturer of precision load cells. [email protected] www.tedea-huntleigh.com 7800 Deering Avenue · P.O. Box 7964 · Canoga Park, CA 91309-7964 USA · Tel: 800.626.2616 · Fax: 818.340.1175 LOS ANGELES, USA DARMSTADT-EBERSTANDT, GERMANY BEIJING, CHINA CARDIFF, UK NETANYA, ISRAEL KARMIEL, ISRAEL CHARTRES, FRANCE 601 / 616 SPECIFICATIONS GRADE F E Accuracy Class Rated Capacity kg 100, 150, 200, 300, 500, 750, 1000 kg mV/V Divisions ±% of Load Rated Output** Total Error*** Total Error Creep at Rated Capacity / Zero Return After 30 Minutes 1500 2 ± 0.10% 2000 0.050 0.050 0.030 0.030 Zero Balance Temperature Range : Operating : Compensated Temperature Effect : On Output : On Zero UNITS G* 50, 100, 250, 500 3000 0.020 0.016 10 -30 to +70 -10 to +45 0.0015 0.0030 0.0040 0.0080 Maximum Overload at the Cneter Loading Point Ultimate Overload at the Center Loading Point Excitation : Recommended : Maximum Input Impedance : 601 / 616 Output Impedance 0.0012 0.0027 ±% of Load ±% of Rated Output °C °C ±% of Load / °C ±% of Rated Output / °C 150 300 10 % of Rated Capacity 15 415 ± 15 / 385 ± 15 Volts AC or DC % of Rated Capacity Volts AC or DC Ohms Ohms Mega Ohms mm kg 350 ± 3 >1000 / >5000 <0.4 Insulation Resistance : 601 / 616 Deflection at Rated Capacity Weight : 601 / 616 Construction : 601 / 616 Cable : 601 : 616 0.41 / 0.58 Aluminum / Stainless Steel 3 Meter, 4 Conductor, PVC Jacket, Floating Shield 3 Meter, 6 Conductor, Polyurethane Jacket, Dual Floating Shield Environmental Protection Approvals IP 65 / IP 67 OIML R60 * G Class available on Model 616 > 300 kg only ** All accuracy specifications maintained when 150% of nominal load is applied for 3 mV/V output *** Nonlinearity, hysteresis, repeatability, and output temperature effect according to OIML R60 and NIST H-44 Wiring Diagram and Dimensions Dimensions Model A B C D E F G 601 2.75 0.80 -1.50 3.00 1.00 1.35 616 2.50 -2.04 1.57 3.15 0.75 1.08 Wiring Diagram Model H I J K L M 601 Red -Green -Blue Yellow 616 Green Blue Red Brown Black White Balanced Temperature Compression + In (H) +Sense (I) +Out (J) - Sense (K) - In (L) The two sense wires (616 only) sample the bridge supply voltage at the load cell. Complete compensation of change in the lead wire resistance, due to temperature change and/or cable extension, is achieved by feeding this voltage into appropriate electronics. - Out (M) [email protected] www.tedea-huntleigh.com Due to Tedea-Huntleighs policy of continuous development, these specifications are subject to change without notice. DSU 600, 1.95 7800 Deering Avenue · P.O. Box 7964 · Canoga Park, CA 91309-7964 USA · Tel: 800.626.2616 · Fax: 818.340.1175 LOS ANGELES, USA DARMSTADT-EBERSTANDT, GERMANY BEIJING, CHINA CARDIFF, UK NETANYA, ISRAEL KARMIEL, ISRAEL CHARTRES, FRANCE