Square Type 5.0 mm × 2.0 mm Series LN848WP ················· LNG848WDD ·········· Orange 2 − 0.6 ± 0.1 Lighting Color PD(mW) IF(mA) IFP(mA)∗ VR(V) Red 70 25 150 4 Green 90 30 150 4 Amber 90 30 150 4 3 Orange 90 30 150 Topr(°C) −25 ∼ +85 −25 ∼ +85 −25 ∼ +85 −25 ∼ +85 Tstg(°C) −30 ∼ +100 −30 ∼ +100 −30 ∼ +100 −30 ∼ +100 10.0 ± 0.2 5.5 2 − 1.0 ± 0.1 ■ Absolute Maximum Ratings (Ta = 25°C) 2.54 1 0.6 ± 0.1 1.5 LN448YP ·················· LNG448YDX ··········· Amber 4.5 LN348GP ·················· LNG348GDG ··········· Green 3.9 4.9 ± 0.3 13.0 ± 1.0 Lighting Color LN248RP ··················· LNG248RDR ············ Red 1.0 Global Prat No. 5.2 ± 0.2 5.0 ± 0.2 2.0 Max. NOT SOLDERED Conventional Part No. Unit: mm 4.0 ± 0.2 3.4 ± 0.2 2.2 ± 0.2 2.0 ± 0.2 2 1: Anode 2: Cathode Pulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec ■ Electro−Optical Characteristics (Ta = 25°C) Lighting Color Red Green Amber Orange − Typ 0.6 1.0 1.5 2.5 mcd Red Diffused Green Diffused Amber Diffused White Diffused − Min 0.25 0.40 0.60 0.90 mcd 50 5 10 30 50 1 100 1.6 LN2 LN3448RP 8GP 3 3 1.8 Forward Current 2.0 2.2 20° 10° 0° 30° 40° 60 10° 20° 30° 40° 80° 50° 50° 60° 60° 40 30 0 20 40 60 80 100 800 90° 100 70° 20° 80° 80 60 40 20 0 40 30 L L N3 LN N44 48G 84 8Y P 8W P P LN 24 8R P 20 60° 40° 70° 20 Wavelength 50 50 LN248RP 700 LN348 LN848WGP P L LN2 N448Y P 48R P 100 Ambient Temperature Directive Characteristics LN848WP 600 VR 4 4 4 3 V IF Ta 80 0 500 Max 5 10 10 10 µA 300 Forward Voltage Forward Current Relative Luminous Intensity 100 LN448YP IR IF 20 20 20 20 mA 500 10 −20 2.4 Relative Luminous Intensity Wavelength Characteristics LN348GP ∆λ Typ 100 30 30 40 nm IO Ta LN 84 8W P 5 0.3 0.1 1 Max 2.8 2.8 2.8 2.8 V 10 LN4 48Y P 48RP LN2 0.5 Typ 2.2 2.2 2.2 2.1 V 30 Forward Current LN 8 LN 48W 448 P YP 34 8G P 5 1 IF 15 20 20 20 mA IF VF 100 LN Luminous Intensity IO IF 10 3 λP Typ 700 565 590 630 nm VF IO Lens Color Reletive Luminous Intensity Conventional Part No. LN248RP LN348GP LN448YP LN848WP Unit 10 80° 20 40 60 Relative Luminous Intensity 80 90° 100 0 0 20 40 60 80 100 Ambient Temperature 189 Caution for Safety Gallium arsenide material (GaAs) is used in this product. DANGER Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products. Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR