ETC LNG252RFR

Square Type
4.0 mm × 4.0 mm Series
LN252RPH ················ LNG252RFR ············ Red
LN352GPH ··············· LNG352GFG ············ Green
4.0 ± 0.2
4.2 ± 0.2
0.6
0.8
LN452YPH ··············· LNG452YFX ············ Amber
2 − 0.8 Max
2 − 0.6 ± 0.1
■ Absolute Maximum Ratings (Ta = 25°C)
Lighting Color PD(mW) IF(mA) IFP(mA)∗ VR(V) Topr(°C)
Red
70
25
150
4
−25 ∼ +85
−25 ∼ +85
Green
90
30
150
4
−25 ∼ +85
Amber
90
30
150
4
Tstg(°C)
−30 ∼ +100
−30 ∼ +100
−30 ∼ +100
2.54
1
2
0.6 ± 0.1
1.5
Lighting Color
4.3 ± 0.2
0.5
1.51.5 3.55 2.0 6.5 ± 0.2
26.5 ± 1.0
8.5 ± 0.2
Global Prat No.
2 Max. NOT SOLDERED
Conventional Part No.
Unit: mm
5.6 ± 0.2
5.4 ± 0.2
4.0 ± 0.2
Pulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec
1: Anode
2: Cathode
■ Electro−Optical Characteristics (Ta = 25°C)
Conventional
Part No.
LN252RPH
LN352GPH
LN452YPH
Unit
Lighting
Lens Color
Color
Red
Red Diffused
Green Green Diffused
Amber Amber Diffused
−
−
Min
0.25
0.40
1.00
mcd
IO  I F
IF
15
20
20
mA
Typ
2.2
2.2
2.2
V
Max
2.8
2.8
2.8
V
Max
5
10
10
µA
VR
4
4
4
V
IO  T a
PH
0.5
10
5
0.3
3
3
5
10
30
50
Relative Luminous Intensity
RPH
252
LN
LN
45
2Y
PH
LN2
5
2
LN3 RPH
52G
PH
35
LN
1
30
Forward Current
PH
45
2Y
50
2G
LN
3
0.1
1
1
100
1.6
1.8
Forward Current
2.0
2.2
20° 10°
0°
30°
40°
60
10° 20°
30°
40°
80°
50°
50°
60°
60°
40°
70°
20
800
90°
100
70°
20°
80°
Wavelength
0
20
40
60
80
100
80
60
40
20
0
40
30
L
LN N35
45 2G
2Y PH
PH
LN
25
2R
PH
20
60°
LN252RPH
700
30
50
Directive Characteristics
600
50
IF  T a
80
0
500
LN35
2GPH
LN
LN 452YP
252
H
RP
H
100
Ambient Temperature
LN452YPH
40
300
Forward Current
Forward Current
LN352GPH
500
10
−20
2.4
Relative Luminous Intensity
Wavelength Characteristics
Relative Luminous Intensity
IR
IF
20
20
20
mA
100
5
100
∆λ
Typ
100
30
30
nm
IF  V F
10
Luminous Intensity
λP
Typ
700
565
590
nm
VF
IO
Typ
0.6
1.0
3.0
mcd
10
80°
20
40
Relative Luminous Intensity
60
80
90°
100
0
0
20
40
60
80
100
Ambient Temperature
203
Caution for Safety
Gallium arsenide material (GaAs) is used
in this product.
DANGER
Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide
material in powder or vapor form is harmful to human
health.
Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of
GaAs-containing products.
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the
products or technologies described in this material and controlled under the "Foreign Exchange and Foreign
Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteristics and
applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting
of relative rights, or the granting of any license.
(3) The products described in this material are intended to be used for standard applications or general electronic
equipment (such as office equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion
equipment, life support systems and safety devices) in which exceptional quality and reliability are required,
or if the failure or malfunction of the products may directly jeopardize life or harm the human body.
• Any applications other than the standard applications intended.
(4) The products and product specifications described in this material are subject to change without notice for
reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the
range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for
any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, redundant design is recommended, so that
such equipment may not violate relevant laws or regulations because of the function of our products.
(6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged.
(7) No part of this material may be reprinted or reproduced by any means without written permission from our
company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications.
Due to modification or other reasons, any information contained in this material, such as available product
types, technical data, and so on, is subject to change without notice.
Customers are advised to contact our semiconductor sales office and obtain the latest information before
starting precise technical research and/or purchasing activities.
B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always
the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any
liability for any damages arising from any errors etc. that may appear in this material.
C. These materials are solely intended for a customer's individual use.
Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or
distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR