Fiber Optic LAN Components High Speed VCSEL 2.5Gbps HFE4090-321 FEATURES • Designed for drive currents between 5 and 15 mA • Optimized for low dependence of electrical properties over temperature • High speed ≥1 GHz The HFE4090-321 is a high-performance 850 nm VCSEL (Vertical Cavity Surface-Emitting Laser) packaged for high-speed data communications. LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT The HFE4090-321 is a high radiance VCSEL designed to convert electrical current into optical power that can be used in fiber optic communications and other applications. As the current varies above threshold, the light intensity increases proportionally. The HFE4090-321 is designed to be used with inexpensive silicon or gallium arsenide detectors, but excellent performance can also be achieved with some indium gallium arsenide detectors. The low drive current requirement makes direct drive from PECL (Positive Emitter Coupled Logic) or EML (Emitter Coupled Logic) gates possible and eases driver design. The HFE4090-321 is designed to interface with 50/125 and 62.5/125 µm multimode fiber. It produces circularly symmetric, non-astigmatic, narrow divergence beams that, with appropriate lensing, fiber couple all of the emitter power. Honeywell www.honeywell.com/sensing/VCSEL HFE4090-321 Fiber Optic LAN Components High Speed VCSEL 2.5Gbps ABSOLUTE MAXIMUM RATINGS Parameter Rating Storage Temperature -40 to +100 °C Operating Temperature 0 to +70 °C Lead Solder Temperature Laser Continuous Forward Current, Heat Sinked 260 °C, 10 sec. 15 mA Laser Reverse Breakdown Voltage (IR=10 µA) 5 V @ 10 µA ELECTRO-OPTICAL CHARACTERISTICS (TA=25 oC unless otherwise stated) VCSEL Parameters Test Condition Peak Operating Current Adjustable to establish operating power IF=9mA Optical Power Output Threshold Current Threshold Current Temperature Variation Slope Efficiency Slope Efficiency Temperature variation Peak Wavelength λP Temperature Variation Spectral Bandwidth, RMS Laser Forward Voltage Laser Reverse Voltage Rise and Fall Times Relative Intensity Noise Series Resistance Series Resistance Temperature Coefficient Beam Divergence TA = 0oC to 70oC o o TA = 0 C to 70 C IF=9 mA IF=9 mA IF=9 mA IF=9 mA IR=10 µA Prebias Above Threshold, 20%-80% 1 GHz BW, IF=9 mA IF=9 mA IF=9 mA, 0oC to 70oC Symbol Min. Ipeak Po ITH ∆ ITH 1 -1.5 η ∆η /∆T 0.225 λP 830 ∆λP/∆T θ Max. Units Notes 9 20 mA 1 mW mA mA 1 5 1.5 2.4 3 0.4 -6000 0.6 850 860 1.8 -10 18 15 -130 25 -3000 mW/mA PPM/ oC 2 3 nm nm/oC 0.06 ∆λ VF BVRLD tr tf RIN RS dRs/dT Typ. 0.85 2.2 nm V V 130 150 -122 40 ps 30 4 dB/Hz Ohms PPM/ oC Degrees 5 Notes: 1. Operating power is set by the peak operating current IPEAK=IBIAS+IMODULATION. 2. Operation at temperatures outside the specified range may result in the threshold current exceeding the maximums defined in the electro-optical characteristics table. 3. Slope efficiency is defined as ∆Po/∆IF. 4. Rise and fall times are sensitive to drive electronics. Beam divergence is defined as the total included angle between the 1/e2 intensity points. 2 Honeywell • www.honeywell.com/sensing/VCSEL For application help: call 1-800-537-6945 HFE4090-321 Fiber Optic Components High Speed VCSEL 2.5Gbps VCSEL NOTICE Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. TYPICAL PERFORMANCE CURVES Typica l I O P , P O P Threshold Current vs. Temperature: Threshold current varies parabolically with temperature; thus it can be nearly constant for a limited temperature range. Threshold Current Emitted Power Emitted Power vs. Current: Power varies approximately linearly with current above threshold. I TH ≈ = I M IN [1.1× 10 -4 (T-T M IN )2 + 1] T M IN , I M IN ITH Te m pe ra ture Curre nt Emission Intensity vs. Wavelength: Typical 10 mA spectrum comprises multiple lines corresponding to multiple transverse modes. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product. Emission Intensity DANGER FW HM of e nve lope typica lly < 0.5 nm The VCSEL is a class IIIb laser and should be treated as a potential eye hazard. Due to the size of the component, the applicable warning logotype, aperture label, and certification/ identification label cannot be placed on the component itself. These labels can be found on the individual envelope in which the VCSEL unit is packaged, or attached to the shipping package. W a ve le ngth For application help: call 1-800-537-6945 www.honeywell.com/sensingVCSEL Honeywell • 3 HFE4090-321 Fiber Optic LAN Components High Speed VCSEL 2.5Gbps VCSEL ORDER GUIDE Catalog Listing HFE4090-321 SALES AND SERVICE Honeywell Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: Description Unattenuated VCSEL TO-46 component MOUNTING DIMENSIONS (for reference only): in./(mm) TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65-580-3312 (Singapore) +44 (0) 118 981 9511 (UK) FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 445 3033 (Singapore) +44 (0) 118 981 7513 (UK) PINOUT HFE4090-321 Number Function 1 Cathode 2 Anode 3 Cathode 4 Case INTERNET http://www.honeywell.com/sensing/VCSEL [email protected] WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell’s warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. 7/6/01 Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006694-1-EN IL50 GLO 797 Printed in USA Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World