DATA SHEET AS002R2-12, AS002R2-12LF: GaAs IC SPDT Low-Loss Reflective Switch 300 kHz–2.5 GHz Features Pin Out VS 10k CBP CBL GND 7 3 6 GND CBP J3 CBL CBL Description 5 V2 4 The AS002R2-12 is a low-loss IC FET SPDT reflective generalpurpose switch in a plastic SOIC-8 package for commercial low- cost, low-power applications. The switch operates with -5, 0 V or 0, +5 V when “floated” as shown in the Pin Out diagram. NEW 8 1 J1 2 Low insertion loss (0.5 dB @ 0.9 GHz) ● High isolation (35 dB @ 0.9 GHz) ● Low-power T/R switch ● Low-cost SOIC-8 plastic package ● Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C per JEDEC J-STD-020 ● J2 V1 External components shown are for positive voltage operation only. CBL = 100 pF, CBP = 1000 pF for operation >500 MHz. Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging. Electrical Specifications at 25 °C (0, -5 V) Parameter(1) Insertion loss(2) Frequency Min. 300 kHz–0.5 GHz 300 kHz–1.0 GHz 300 kHz–2.0 GHz 300 kHz–2.5 GHz Isolation 300 kHz–0.5 GHz 300 kHz–1.0 GHz 300 kHz–2.0 GHz 300 kHz–2.5 GHz VSWR(3) 300 kHz–0.5 GHz 300 kHz–1.0 GHz 300 kHz–2.5 GHz 40 30 22 18 Typ. Max. Unit 0.4 0.5 0.7 0.8 0.5 0.6 0.8 0.9 dB dB dB dB 42 32 24 20 1.2:1 1.3:1 1.5:1 dB dB dB dB 1.3:1 1.5:1 1.7:1 1. All measurements made in a 50 Ω system, unless otherwise specified. 2. Insertion loss changes by 0.003 dB/°C. 3. Insertion loss state. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200168 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • August 15, 2006 1 DATA SHEET • AS002R2-12, AS002R2-12LF Operating Characteristics at 25 °C (0, -5 V) Parameter Condition Switching characteristics Rise, fall On, off Video feedthru Frequency Min. 10/90% or 90/10% RF 50% CTL to 90/10% RF TRISE = 1 ns, BW = 500 MHz Input power for 1 dB compression Intermodulation intercept point (IP3) For two-tone input power 13 dBm Max. Unit 3 6 15 ns ns mV 0.5–2 GHz 0.05 GHz 24 16 dBm dBm 0.5–2 GHz 46 dBm 25 °C/W Thermal resistance Control voltages Typ. VLOW = 0 to -0.2 V @ 20 µA max. VHIGH = -5 V @ 50 µA to -8 V @ 200 µA max. 1.2 60 1.0 50 Isolation (dB) Insertion Loss (dB) Typical Performance Data (0, -5 V) 0.8 85 °C 0.6 40 30 -40 °C 20 0.4 10 0.2 2 1 1 3 2 Frequency (GHz) Frequency (GHz) Insertion Loss vs. Frequency Isolation vs. Frequency 1.5 VSWR 1.4 1.3 1.2 1.1 1.0 1 2 3 Frequency (GHz) VSWR vs. Frequency Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 August 15, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200168 Rev. B 3 DATA SHEET • AS002R2-12, AS002R2-12LF Truth Table Absolute Maximum Ratings Characteristic Negative Operation V1 V2 J1–J2 J1–J3 0 -5 -5 Isolation Insertion loss 0 Insertion loss Isolation All other conditions not recommended. Positive Operation V1 V2 J1–J2 J1–J3 VHIGH 0 Isolation Insertion loss 0 VHIGH Insertion loss Isolation All other conditions not recommended. VHIGH = 5 to 8 V (VS = VHIGH ± 0.2 V). SOIC-8 Pin 8 0.050 (1.27 mm) BSC RF input power Control voltage Value 2 W > 500 MHz 0/-8 V 0.5 W @ 50 MHz 0/-8 V +0.2 V, -8 V Operating temperature -40 °C to +85 °C Storage temperature -65 °C to +150 °C Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. CAUTION: Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. 0.244 (6.20 mm) 0.228 (5.80 mm) Pin 1 Indicator Recommended Solder Reflow Profiles Pin 1 0.068 (1.73 mm) Max. 0.197 (5.00 mm) 0.189 (4.80 mm) 0.010 (0.25 mm) 0.004 (0.10 mm) Refer to the “Recommended Solder Reflow Profile” Application Note. 0.020 (0.51 mm) Max. 0.049 (1.24 mm) 0.016 (0.41 mm) 0.016 Max. (0.41 mm) x 45˚ Chamfer 0.158 (4.00 mm) 0.150 (3.80 mm) 0.010 (0.25 mm) 0.007 (0.17 mm) 8˚ Max. Tape and Reel Information Refer to the “Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation” Application Note. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200168 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • August 15, 2006 3 DATA SHEET • AS002R2-12, AS002R2-12LF Copyright © 2002, 2003, 2004, 2005, 2006, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 August 15, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200168 Rev. B