data sheet AS192-000: PHEMT GaAs IC High-Power SP4T Switch 0.1–2.5 GHz Features Simplified Schematic 4 symmetric RF paths l Positive voltage control l High IP3 l Excellent harmonic performance l Handles GSM power levels l Available in 100% RF tested chip form l A vailable lead (Pb)-free, RoHS-compliant, and Green l J1 V2 J2 ANT J3 V3 Description The AS192-000 is a reflective SP4T switch. It is an ideal switch for higher power applications. It can be used for GSM dual-band handset applications where low loss, low current and small size are critical parameters. NEW V1 J4 V4 Skyworks Green™ products are RoHS (Restriction of Hazardous Substances)-compliant, conform to the EIA/EICTA/JEITA Joint Industry Guide (JIG) Level A guidelines, are halogen free according to IEC-61249-2-21, and contain <1,000 ppm antimony trioxide in polymeric materials. Electrical Specifications at 25 °C (0, +4.5 V) Parameter Frequency Min.Typ. Insertion loss Ant-J1, J2, J3, J4 0.1–0.5 GHz 0.5–1.0 GHz 1.0–2.0 GHz 2.0–2.5 GHz Isolation Ant-J1, J2, J3, J4 0.1–0.5 GHz 0.5–1.0 GHz 1.0–2.0 GHz 2.0–2.5 GHz VSWR 0.1–1.0 GHz 1.0–2.5 GHz 30 25 19 18 0.90 0.95 1.00 1.10 Max. Unit 1.1 1.1 1.2 1.3 dB dB dB dB 34 29 23 21 dB dB dB dB 1.3:1 1.4:1 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200144 Rev. D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • October 22, 2008 1 Data Sheet • AS192-000 Operating Characteristics at 25 °C (0, +4.5 V) Parameter Condition Frequency Min.Typ. Max. Unit Switching characteristics Rise, fall (10/90% or 90/10% RF) On, off (50% CTL to 90/10% RF) Video feedthru 50 100 50 ns ns mV IP3 13 dBm/tone +55 dBm 2nd and 3rd harmonics 34 dBm input 900 MHz -65 dBc Control voltage VHIGHVLOW Control port current 3 0 5 0.2 V V VCTL = 5 V VCTL = 3 V VCTL = 2.7 V VCTL = 0 V 200 200 200 20 µA µA µA µA 0 0 -0.2 -5 -0.4 -10 -0.6 -15 Isolation (dB) Loss (dB) Typical Performance Data -0.8 -1.0 -1.2 -30 -35 -1.6 -40 -1.8 -45 -50 0 0.5 1.0 1.5 2.0 2.5 0 0.5 1.0 1.5 2.0 Frequency (GHz) Frequency (GHz) typical Insertion Loss vs. Frequency typical Isolation vs. Frequency 2.5 Absolute Maximum Ratings 2.5 2.0 VSWR -25 -1.4 -2.0 Characteristic RF input power 1.5 1.0 Value 4 W > 0.5 GHz 0/+6 V control Control voltage +6 V Operating temperature -40 °C to +85 °C Storage temperature -65 °C to +150 °C Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. 0.5 0 0 0.5 1.0 1.5 Frequency (GHz) typical VsWR 2 -20 2.0 2.5 CAUTION: A lthough this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com October 22, 2008 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200144 Rev. D Data Sheet • AS192-000 V4Ant-J1Ant-J2Ant-J3Ant-J4 VHigh VLow VLow VLow Ins. loss VLow VHigh VLow VLow VLow VLow VHigh VLow VLow VLow VLow VHigh J4 Isolation Isolation Isolation Ins. loss Isolation Isolation Isolation Isolation Ins. loss Isolation 0.0261 (0.66 mm) V4 Ins. loss 0.0209 (0.53 mm) ANT 0.0156 (0.40 mm) V1 Isolation Isolation Isolation 0.0030 (0.08 mm) 0.0000 (0.00 mm) J1 0.0000 (0.00 mm) 0.0031 (0.08 mm) VLow = 0. VHigh = 4.5 to 5.0 V for RF power > 30 dBm. VHigh = 3.0 to 5.0 V for RF power 20–30 dBm. VHigh = 2.7 to 5.0 V for RF power < 20 dBm. All other conditions not recommended. Isolation 0.0417 (1.06 mm) 0.0387 (0.98 mm) J3 V3 V2 J2 0.0382 (0.97 mm) V3 0.0351 (0.89 mm) V2 0.0045 (0.11 mm) V1 Outline and Pin Out Drawing 0.0337 (0.86 mm) Truth Table Chip thickness 0.008 ± 0.001 (0.203 ± 0.025). Bond pad dimensions: 0.028 (0.07 mm square). Bond pad metallization: gold. Backside metallization: none. Dimensions in inches (mm). Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200144 Rev. D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • October 22, 2008 3 Data Sheet • AS192-000 Copyright © 2002, 2003, 2004, 2005, 2006, 2007, 2008, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. 4 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com October 22, 2008 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200144 Rev. D