Bulletin PD-20880 rev. B 10/06
30ETH06PbF
Hyperfast Rectifier
Features
•
•
•
•
•
•
trr = 28ns typ.
IF(AV) = 30Amp
VR = 600V
Hyperfast Recovery Time
Low Forward Voltage Drop
Low Leakage Current
175°C Operating Junction Temperature
Dual Diode Center Tap
Lead-Free ("PbF" suffix)
Description/ Applications
State of the art Hyperfast recovery rectifiers designed with optimized performance of forward voltage drop,
Hyperfast recover time, and soft recovery.
The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness
and reliability characteristics.
These devices are intended for use in PFC Boost stage in the AC-DC section of SMPS, inverters or as freewheeling
diodes.
The IR extremely optimized stored charge and low recovery current minimize the switching losses and reduce over
dissipation in the switching element and snubbers.
Absolute Maximum Ratings
Parameters
Max
Units
600
V
@ TC = 103°C
30
A
@ TJ = 25°C
200
VRRM
Peak Repetitive Reverse Voltage
IF(AV)
Average Rectifier Forward Current
IFSM
Non Repetitive Peak Surge Current
TJ, TSTG
Operating Junction and Storage Temperatures
- 65 to 175
°C
Case Styles
Base
Cathode
1
Cathode
3
Anode
TO-220AC
www.irf.com
1
30ETH06PbF
Bulletin PD-20880 rev. B 10/06
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
Parameters
VBR, Vr
Breakdown Voltage,
Blocking Voltage
VF
Forward Voltage
IR
Min Typ Max Units Test Conditions
600
Reverse Leakage Current
-
-
V
IR = 100μA
-
2.0
2.6
V
IF = 30A, TJ = 25°C
-
1.34 1.75
V
IF = 30A, TJ = 150°C
-
0.3
50
μA
VR = VR Rated
-
60
500
μA
TJ = 150°C, VR = VR Rated
CT
Junction Capacitance
-
33
-
pF
VR = 600V
LS
Series Inductance
-
8.0
-
nH
Meas. lead to lead 5mm from package body
Dynamic Recovery Characteristics @ TJ = 25°C (unless otherwise specified)
Parameters
trr
Min Typ Max Units Test Conditions
Reverse Recovery Time
IRRM
Qrr
Peak Recovery Current
Reverse Recovery Charge
-
28
35
ns
-
31
-
TJ = 25°C
77
-
TJ = 125°C
-
3.5
-
-
7.7
-
-
65
-
-
345
-
A
IF = 1.0A, diF/dt = 50A/μs, VR = 30V
IF = 30A
VR = 200V
diF /dt = 200A/μs
TJ = 25°C
TJ = 125°C
nC
TJ = 25°C
TJ = 125°C
Thermal - Mechanical Characteristics
Parameters
Min
Typ
Max
Units
°C
TJ
Max. Junction Temperature Range
- 65
-
175
TStg
Max. Storage Temperature Range
- 65
-
175
RthJC
Thermal Resistance, Junction to Case
Per Leg
-
0.7
1.1
RthJA
Thermal Resistance, Junction to Ambient Per Leg
-
-
70
RthCS
Thermal Resistance, Case to Heatsink
-
0.2
-
Wt
Weight
-
2.0
-
Mounting Torque
°C/W
g
-
0.07
-
(oz)
6.0
-
12
Kg-cm
5.0
-
10
lbf.in
Case Style
TO-220AC
Marking Device
30ETH06
JEDEC
Typical Socket Mount
Mounting Surface, Flat, Smooth and Greased
2
www.irf.com
30ETH06PbF
Bulletin PD-20880 rev. B 10/06
1000
1000
(μA)
R
Reverse Current - I
Instantaneous Forward Current - I F (A)
100
Tj = 175˚C
150˚C
100
125˚C
10
100˚C
1
0.1
25˚C
0.01
0.001
0.0001
0
100
200
300
400
500
600
Reverse Voltage - VR (V)
Fig. 2 - Typical Values Of Reverse Current
Vs. Reverse Voltage
Junction Capacitance - C T (pF)
1000
T = 175˚C
J
10
T = 150˚C
J
T = 25˚C
J
1
0
0.5
1
1.5
2
2.5
3
3.5
T J = 25˚C
100
10
0
100
200
300
400
500
600
Forward Voltage Drop - VFM (V)
Reverse Voltage - VR (V)
Fig. 1 - Typical Forward Voltage Drop Characteristics
Fig. 3 - Typical Junction Capacitance
Vs. Reverse Voltage
Thermal Impedance Z thJC (°C/W)
10
1
0.1
D = 0.50
D = 0.20
D = 0.10
D = 0.05
D = 0.02
D = 0.01
0.01
0.001
0.00001
PDM
t1
t2
Single Pulse
(Thermal Resistance)
Notes:
1. Duty factor D = t1/ t2
2. Peak Tj = Pdm x ZthJC + Tc
0.0001
0.001
0.01
0.1
t1, Rectangular Pulse Duration (Seconds)
1
10
Fig. 4 - Max. Thermal Impedance Z thJC Characteristics
www.irf.com
3
30ETH06PbF
Bulletin PD-20880 rev. B 10/06
90
Average Power Loss ( Watts )
Allowable Case Temperature (°C)
180
160
140
DC
120
Square wave (D = 0.50)
100 Rated Vr applied
see note (3)
80
RMS Limit
70
60
DC
50
D = 0.01
D = 0.02
D = 0.05
D = 0.1
D = 0.2
D = 0.5
40
30
20
10
0
80
0
0
5 10 15 20 25 30 35 40 45
5 10 15 20 25 30 35 40 45
Average Forward Current - I F(AV) (A)
Average Forward Current - IF(AV) (A)
Fig. 5 - Max. Allowable Case Temperature
Vs. Average Forward Current
90
Fig. 6 - Forward Power Loss Characteristics
1200
V R = 200V
T J = 125˚C
T J = 25˚C
IF = 30 A
IF = 15 A
80
1000
70
800
Qrr ( nC )
trr ( ns )
60
50
40
30
IF = 30 A
IF = 15 A
600
400
20
200
10
V R = 200V
T J = 125˚C
T J = 25˚C
0
100
1000
di F /dt (A/μs )
Fig. 7 - Typical Reverse Recovery vs. di F /dt
0
100
1000
di F /dt (A/μs )
Fig. 8 - Typical Stored Charge vs. di F /dt
(3) Formula used: TC = T J - (Pd + PdREV) x RthJC ;
Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6);
PdREV = Inverse Power Loss = VR1 x I R (1 - D); I R @ VR1 = rated VR
4
www.irf.com
30ETH06PbF
Bulletin PD-20880 rev. B 10/06
Reverse Recovery Circuit
VR = 200V
0.01 Ω
L = 70µH
D.U.T.
D
diF /dt
dif/dt
ADJUST G
IRFP250
S
Fig. 9- Reverse Recovery Parameter Test Circuit
3
t rr
IF
tb
ta
0
2
Q rr
I RRM
4
0.5 I RRM
di(rec)M/dt
5
0.75 I RRM
1
diFf /dt
1. diF/dt - Rate of change of current through zero
crossing
2. IRRM - Peak reverse recovery current
3. trr - Reverse recovery time measured from zero
crossing point of negative going IF to point where
a line passing through 0.75 IRRM and 0.50 IRRM
extrapolated to zero current
4. Qrr - Area under curve defined by t rr
and IRRM
t x I RRM
Q rr = rr
2
5. di (rec) M / dt - Peak rate of change of
current during t b portion of t rr
Fig. 10 - Reverse Recovery Waveform and Definitions
www.irf.com
5
30ETH06PbF
Bulletin PD-20880 rev. B 10/06
Outline Table
Conforms to JEDEC Outline TO-220AC
Dimensions in millimeters and (inches)
Part Marking Information
IRXC Assembly Line
EXAMPLE: THIS IS A 30ETH06
LOT CODE 1789
ASSEMBLED ON WW 19, 2001
IN THE ASSEMBLY LINE "C"
PART NUMBER
INTERNATIONAL
RECTIFIER
LOGO
DATE CODE
ASSEMBLY
LOT CODE
IRMX Assembly Line
EXAMPLE: THIS IS A 30ETH06
LOT CODE 1789
ASSEMBLED ON WW 19, 2001
IN THE ASSEMBLY LINE "C"
6
P = LEAD-FREE
YEAR 1 = 2001
WEEK 19
LINE C
PART NUMBER
INTERNATIONAL
RECTIFIER
LOGO
DATE CODE
ASSEMBLY
LOT CODE
YEAR 1 = 2001
WEEK 19
P = LEAD-FREE
www.irf.com
30ETH06PbF
Bulletin PD-20880 rev. B 10/06
Ordering Information Table
Device Code
30
E
T
H
06
PbF
1
2
3
4
5
6
1
-
Current Rating (30 = 30A)
2
-
E = Single Diode
3
-
Package
T = TO-220
4
4
-
H = HyperFast Recovery
5
-
Voltage Rating (06 = 600V)
6
-
none = Standard Production
PbF = Lead-Free
Tube Standard Pack Quantity : 50 pieces
Data and specifications subject to change without notice.
This product has been designed and qualified for Industrial Level and Lead-Free.
Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 10/06
www.irf.com
7