Bulletin PD-20674 04/04 30CPU04PbF ULTRAFAST RECTIFIER Features • • • • • trr = 60ns IF(AV) = 30Amp VR = 400V Ultrafast Recovery Time Low Forward Voltage Drop Low Leakage Current 175°C Operating Junction Temperature Lead-Free Description/ Applications International Rectifier's FRED.. series are the state of the art Ultra fast recovery rectifiers specifically designed with optimized performance of forward voltage drop and ultra fast recovery time. The planar structure and the platinum doped life time control, guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in the output rectification stage of SMPS, UPS, DC-DC converters as well as free-wheeling diode in low voltage inverters and chopper motor drives. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. Absolute Maximum Ratings Parameters Max VRRM Peak Repetitive Peak Reverse Voltage IF(AV) Average Rectified Forward Current Per Leg Units 400 V 15 A Total Device (Rated VR ), T C = 149°C Total Device 30 IFSM Non Repetitive Peak Surge Current, @ 25°C Per Leg 200 IFRM Peak Repetitive Forward Current Per Leg 30 (Rated V R , Square wave, 20 KHz), TC = 149°C TJ, TSTG Operating Junction and Storage Temperatures - 65 to 175 °C Case Styles Base Common Cathode 30CPU04PbF 2 1 Anode 1 TO247AC www.irf.com 3 2 Anode 2 Common Cathode 1 30CPU04PbF Bulletin PD-20674 04/04 Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameters Min Typ Max Units Test Conditions VBR, Vr Breakdown Voltage, Blocking Voltage 400 VF Forward Voltage IR Reverse Leakage Current - - V IR = 100µA - 1.17 1.25 V IF = 15A - 0.93 1.12 V IF = 15A, TJ = 150°C - 0.3 10 µA VR = VR Rated - 30 500 µA TJ = 150°C, VR = VR Rated CT Junction Capacitance - 28 - pF VR = 400V LS Series Inductance - 12 - nH Measured lead to lead 5mm from package body Dynamic Recovery Characteristics @ TJ = 25°C (unless otherwise specified) Parameters Min Typ Max Units Test Conditions Reverse Recovery Time trr - 36 60 - 46 - ns TJ = 25°C 80 IRRM Qrr Peak Recovery Current Reverse Recovery Charge IF = 1.0A, diF/dt = 50A/µs, VR = 30V TJ = 125°C - 3.6 - A - 8.7 - - 84 - nC - 345 - IF = 15A VR = 200V TJ = 25°C diF /dt = 200A/µs TJ = 125°C TJ = 25°C TJ = 125°C Thermal - Mechanical Characteristics Min Typ Max Units TJ Parameters Max. Junction Temperature Range - - 175 °C TStg Max. Storage Temperature Range - 65 - 175 RthJC Thermal Resistance, Junction to Case Per Leg - 0.8 1.5 RthJA Thermal Resistance, Junction to Ambient Per Leg - - 40 RthCS Thermal Resistance, Case to Heatsink - 0.4 - Wt Weight - 6.0 - g - 0.21 - (oz) Mounting Torque °C/W 6.0 - 12 Kg-cm 5.0 - 10 lbf.in Typical Socket Mount Mounting Surface, Flat, Smooth and Greased 2 www.irf.com 30CPU04PbF Bulletin PD-20674 04/04 100 1000 Tj = 175˚C Reverse Current - I R (µA) 10 Tj = 150˚C 10 Tj = 125˚C 1 Tj = 100˚C 0.1 0.01 Tj = 25˚C 0.001 0.0001 0 T J = 175˚C 100 200 300 400 Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage T = 150˚C J T = 25˚C J 1000 Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) 100 1 0.1 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 T = 25˚C J 100 10 2 0 Forward Voltage Drop - VFM (V) Fig. 1 - Typical Forward Voltage Drop Characteristics 100 200 300 400 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Thermal Impedance Z thJC (°C/W) 10 1 0.1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 PDM t1 t2 Single Pulse (Thermal Resistance) Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC+ Tc 0.01 0.00001 0.0001 0.001 0.01 0.1 1 t1, Rectangular Pulse Duration (Seconds) 10 100 Fig. 4 - Max. Thermal Impedance Z thJC Characteristics www.irf.com 3 30CPU04PbF Bulletin PD-20674 04/04 25 Average Power Loss ( Watts ) Allowable Case Temperature (°C) 180 170 DC 160 150 Square wave (D = 0.50) Rated Vr applied 140 see note (3) RMS Limit 20 15 D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 DC 10 5 0 130 0 5 10 15 20 0 25 Average Forward Current - I F(AV) (A) 5 10 15 20 25 Average Forward Current - I F(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics 1000 100 If = 30A If = 16A If = 8A 90 80 Qrr ( nC ) trr ( ns ) 70 60 50 100 If = 30A If = 16A If = 8A 40 30 20 Vr = 200V Tj = 125˚C Tj = 25˚C Vr = 200V Tj = 125˚C Tj = 25˚C 10 100 1000 di F /dt (A/µs ) Fig. 7 - Typical Reverse Recovery vs. di F /dt 10 100 1000 di F /dt (A/µs ) Fig. 8 - Typical Stored Charge vs. di F /dt (3) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = V R1 x IR (1 - D); IR @ VR1 = rated VR 4 www.irf.com 30CPU04PbF Bulletin PD-20674 04/04 Reverse Recovery Circuit VR = 200V 0.01 Ω L = 70µH D.U.T. di F /dt dif/dt ADJUST D IRFP250 G S Fig. 9- Reverse Recovery Parameter Test Circuit 3 t rr IF tb ta 0 2 Q rr I RRM 4 0.5 I RRM di(rec)M/dt 5 0.75 I RRM 1 /dt di fF/dt 1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current 4. Qrr - Area under curve defined by t rr and IRRM t rr x I RRM Q rr = 2 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr Fig. 10 - Reverse Recovery Waveform and Definitions www.irf.com 5 30CPU04PbF Bulletin PD-20674 04/04 Outline Table 15.90 (0.626) 3.65 (0.144) 3.55 (0.139) DIA. 15.30 (0.602) 5.30 (0.209) 4.70 (0.185) 2.5 (0.098) Base Common Cathode 1.5 (0.059) 5.70 (0.225) 5.30 (0.208) 20.30 (0.800) 19.70 (0.775) 1 2 3 2 5.50 (0.217) 4.50 (0.177) (2 PLCS.) 1 14.80 (0.583) 14.20 (0.559) 1.40 (0.056) 1.00 (0.039) 5.47 (0.216) 5.43 (0.213) Anode 1 4.30 (0.170) 3.70 (0.145) Anode 2 Common Cathode 2.20 (0.087) MAX. 3.20 (0.126) MAX. 3 2 2.40 (0.095) MAX. 0.80 (0.032) 0.40 (0.213) Conforms to JEDEC Outline TO-247AC Dimensions in millimeters and (inches) Marking Information EXAMPLE: THIS IS A 30CPU04 WITH ASSEMBLY LOT CODE 5657 ASSEMBLED ON WW 35, 2000 IN THE ASSEMBLY LINE "H" 6 INTERNATIONAL RECTIFIER LOGO PART NUMBER 30CPU04 P035H 56 57 ASSEMBLY LOT CODE www.irf.com 30CPU04PbF Bulletin PD-20674 04/04 Ordering Information Table Device Code 30 C P U 04 PbF 1 2 3 4 5 6 1 - Current Rating 2 - Common Cathode 3 - TO-247AC 4 - Ultrafast Recovery 5 - Voltage Rating 6 - Lead-Free (30 = 30A) (04 = 400V) Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 04/04 www.irf.com 7