EVERLIGHT ELECTRONICS CO.,LTD Technical Data Sheet Full Color Top View LEDs 67-23SURSYGUBC/S530-A2/TR8 Features ․P-LCC-4 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Low (2mA) current operation. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (8mm Tape). ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 67-23 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Type SUR Material AlGaInP Emitted Color Brilliant Red SYG AlGaInP Brilliant Yellow Green UB InGaN/SiC Blue Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date:5-Jul-2006 Lens Color Water Clear Rev. 1 Page: 1 of 10 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD 67-23SURSYGUBC/S530-A2/TR8 Package Dimensions CL 1 4 SUR 2.8±0.2 CL 2 0.7±0.1 2.2±0.1 3 1 2 4 SYG 3 UB 0.15±0.05 0.8±0.1 2.4±0.1 2.8±0.2 1.9±0.2 3.5±0.2 0.5±0.1 3.2±0.2 2.7±0.2 For reflow soldering(propose) 0.8±0.1 1.6 1.8 0.7 2.2 1.8 Notes: All dimensions are in millimeters. Tolerances unspecified are ±0.1mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date:5-Jul-2006 Rev. 1 Page: 2 of 10 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD 67-23SURSYGUBC/S530-A2/TR8 Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current Power Dissipation Peak Forward Current(Duty 1/10 @ 1KHZ) IF Pd IFP SUR 25 SUG 25 SUB 30 SUR 60 SYG 60 UB 130 SUR 60 SYG 60 UB 70 mA mW mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +100 ℃ Electrostatic Discharge(HBM) Soldering Temperature ESD Tsol SUR 2000 SYG 2000 UB 1000 V Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date:5-Jul-2006 Rev. 1 Page: 3 of 10 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD 67-23SURSYGUBC/S530-A2/TR8 Electro-Optical Characteristics (Ta=25℃) Parameter *Symbol Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Typ. Max. SUR 20 47 ----- SYG 13 20 ----- UB 11 18 ----- SUR ----- 632 ----- SYG ----- 575 ----- UB ----- 428 ----- SUR 617.5 ----- 633.5 SYG 569.5 ----- 577.5 UB 423.5 ----- 432.5 SUR ----- 20 ----- SYG ----- 20 ----- UB ----- 65 ----- SUR ----- 2.0 2.4 SYG ----- 2.0 2.4 UB ----- 3.8 4.5 2θ1/2 ----- 120 IR ----- ----- IV Luminous Intensity Peak Wavelength Min. λp λd △λ VF Viewing Angle Reverse Current Unit Condition mcd IF=20mA nm IF=20mA nm IF=20mA nm IF=20mA V IF=20mA ----- deg IF=20mA 10 μA VR=5V *67-23SURSYGUBC/S530-A2/TR8 Symbol Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date:5-Jul-2006 Rev. 1 Page: 4 of 10 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD 67-23SURSYGUBC/S530-A2/TR8 Typical Electro-Optical Characteristics Curves Blue Green Red Green,Red Blue Green,Red Blue Blue Everlight Electronics Co., Ltd. Device No. : Green,Red http://www.everlight.com Prepared date:5-Jul-2006 Rev. 1 Page: 5 of 10 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD 67-23SURSYGUBC/S530-A2/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: Tolerances Unless Dimension ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date:5-Jul-2006 Rev. 1 Page: 6 of 10 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD 67-23SURSYGUBC/S530-A2/TR8 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Progressive direction 2.0±0.05 0.23 1.55±0.1 4 1- 2- 3Polarity 4.0 3.84 3.5±0.05 8.0±0.3 1.75 4.0 2.24 3.12 Note: Tolerances Unless Dimension ±0.1mm , Unit = mm Moisture Resistant Packaging Label Aluminum moistue-proof bag Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date:5-Jul-2006 Desiccant Label Rev. 1 Page: 7 of 10 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD 67-23SURSYGUBC/S530-A2/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 4 5 Test Condition Thermal Shock High Temperature Storage Low Temperature Storage Temp. : 260℃±5℃ Min 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min Test Hours/Cycles Sample Ac/Re Size 6 min 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date:5-Jul-2006 Rev. 1 Page: 8 of 10 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD 67-23SURSYGUBC/S530-A2/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date:5-Jul-2006 Rev. 1 Page: 9 of 10 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD 67-23SURSYGUBC/S530-A2/TR8 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Prepared date:5-Jul-2006 Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Rev. 1 Page: 10 of 10 Prepared by:Teresa Lee