EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet TOP View LEDs With Lens 67-11BUWC/S400-X10/TR8 Features ․P-LCC-2 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (12mm Tape). ․ESD protection. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 67-11B series is available in soft orange, green, blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․Light pipe application. ․General use. Device Selection Guide Chip Lens Color Material Emitted Color InGaN Pure White Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-67B-035 prepared date:1-Feb-2007 Rev.1 Page: 1 of 10 Prepared by:Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-11BUWC/S400-X10/TR8 Package Dimensions CL 2.2±0.1 2.8±0.2 CL - + 3.25±0.2 Polarity 3.0 For reflow soldering (propose) Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-67B-035 prepared date:1-Feb-2007 Rev.1 Page: 2 of 10 Prepared by:Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-11BUWC/S400-X10/TR8 Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Power Dissipation Pd 110 mW Electrostatic Discharge(HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Units Condition Luminous Intensity IV 1420 --- --- mcd IF=20mA Forward Voltage VF --- 3.50 4.00 V IF=20mA Viewing Angle 2θ1/2 --- 60 --- deg IF=20mA Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-67B-035 prepared date:1-Feb-2007 Rev.1 Page: 3 of 10 Prepared by:Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-11BUWC/S400-X10/TR8 Color Ranks x y A0 0.280 0.264 0.283 0.296 0.248 0.267 0.305 0.276 x y B4 0.307 0.304 0.330 0.330 0.315 0.330 0.360 0.339 x y B6 0.311 0.307 0.330 0.330 0.294 0.315 0.339 0.318 x y B3 0.287 0.283 0.304 0.307 0.295 0.305 0.33 0.315 x y B5 0.296 0.287 0.307 0.311 0.276 0.295 0.315 0.294 x y C0 0.330 0.330 0.361 0.356 0.318 0.360 0.385 0.351 CIE Chromaticity Diagram *The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01). Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-67B-035 prepared date:1-Feb-2007 Rev.1 Page: 4 of 10 Prepared by:Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-11BUWC/S400-X10/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-67B-035 prepared date:1-Feb-2007 Rev.1 Page: 5 of 10 Prepared by:Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-11BUWC/S400-X10/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-67B-035 prepared date:1-Feb-2007 Rev.1 Page: 6 of 10 Prepared by:Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-11BUWC/S400-X10/TR8 Carrier Tape Dimensions: Loaded quantity 500 PCS per reel. + Polarity Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-67B-035 prepared date:1-Feb-2007 Desiccant Rev.1 Label Page: 7 of 10 Prepared by:Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-11BUWC/S400-X10/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 4 5 Thermal Shock High Temperature Storage Low Temperature Storage Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min Test Sample Ac/Re Hours/Cycles Size 6 min 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-67B-035 prepared date:1-Feb-2007 Rev.1 Page: 8 of 10 Prepared by:Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-11BUWC/S400-X10/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-67B-035 prepared date:1-Feb-2007 Rev.1 Page: 9 of 10 Prepared by:Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-11BUWC/S400-X10/TR8 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-67B-035 prepared date:1-Feb-2007 Rev.1 Page: 10 of 10 Prepared by:Ray Yuan