ZMO54W Part Number: www.SunLED.com 2.0x1.25mm SMD CHIP LED LAMP Features z 2.0mmx1.25mm SMT LED,1.1mm THICKNESS. z LOW POWER CONSUMPTION. z WIDE VIEWING ANGLE. z IDEAL FOR BACKLIGHT AND INDICATOR. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE : 2000PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute maximum ratings (TA=25°C) MO (InGaAlP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 195 mA Power Dissipation PT 75 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Part Number ZMO54W Emitting Color Orange Published Date : FEB 26,2008 Emitting Material InGaAlP Operating Characteristics (TA=25°C) °C Lens-color Water Clear Drawing No : SDSA2431 MO (InGaAlP) Unit Forward Voltage (Typ.) (IF=20mA) VF 2.0 V Forward Voltage (Max.) (IF=20mA) VF 2.5 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission (Typ.) (IF=20mA) λP 610 nm Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 601 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 29 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 30 pF Luminous Intensity (IF=20mA) mcd min. typ. 70 198 V5 Wavelength nm λP Viewing Angle 2 θ 1/2 610 120° Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com ZMO54W 2.0x1.25mm SMD CHIP LED LAMP MO Published Date : FEB 26,2008 Drawing No : SDSA2431 V5 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com ZMO54W 2.0x1.25mm SMD CHIP LED LAMP Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 26,2008 Drawing No : SDSA2431 V5 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com ZMO54W 2.0x1.25mm SMD CHIP LED LAMP PACKING & LABEL SPECIFICATIONS Published Date : FEB 26,2008 Drawing No : SDSA2431 ZMO54W V5 Checked : B.L.LIU P.4/4