Part Number: www.SunLED.com ZSG91W 4.0x3.0mm RIGHT ANGLE SMD CHIP LED LAMP PRELIMINARY SPEC Features z4.0mmx3.0mm RIGHT ANGLE SMT LED, 2.65mm THICKNESS. zLOW POWER CONSUMPTION. zWIDE VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR. zPACKAGE :500PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 4. z RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) SG (InGaAlP) Unit Operating Characteristics (TA=25°C) SG (InGaAlP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Voltage (Typ.) (IF=20mA) VF 2.1 V Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 150 mA Forward Voltage (Max.) (IF=20mA) VF 2.5 V Power Dissipation PT 75 mW Reverse Current (Max.) (VR=5V) IR 10 uA Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Wavelength of Peak Emission (Typ.) (IF=20mA) λP 574 nm Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 568 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 26 nm Capacitance (VF=0V, f=1MHz) C 20 pF Storage Temperature Part Number ZSG91W Emitting Color Green Published Date : FEB 27,2008 Emitting Material °C Lens-color Luminous Intensity (IF=20mA) mcd min. typ. Water Clear 50 98 Drawing No : SDSA6429 V1 InGaAlP Wavelength nm λP Viewing Angle 2 θ 1/2 574 90° Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com ZSG91W 4.0x3.0mm RIGHT ANGLE SMD CHIP LED LAMP SG Published Date : FEB 27,2008 Drawing No : SDSA6429 V1 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com ZSG91W 4.0x3.0mm RIGHT ANGLE SMD CHIP LED LAMP Recommended Soldering Pattern (Units : mm;Tolerance:± 0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 27,2008 Drawing No : SDSA6429 V1 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com PACKING & LABEL SPECIFICATIONS Published Date : FEB 27,2008 ZSG91W 4.0x3.0mm RIGHT ANGLE SMD CHIP LED LAMP Drawing No : SDSA6429 ZSG91W V1 Checked : B.L.LIU P.4/4