SUNLED ZFMYK05C2

Part Number:
www.SunLED.com
ZFMYK05C2
SURFACE MOUNT DISPLAY
Features
●0.2 INCH DIGIT HEIGHT.
●LOW CURRENT OPERATION.
●EXCELLENT CHARACTER APPEARANCE.
●I.C. COMPATIBLE.
●MECHANICALLY RUGGED.
●GRAY FACE, WHITE SEGMENT.
●PACKAGE : 300PCS / REEL.
●MOISTURE SENSITIVITY LEVEL : LEVEL 4.
●RoHS COMPLIANT.
MYK
Notes:
1. All dimensions are in millimeters (inches).
Operating Characteristics
(TA=25°C)
2. Tolerance is ± 0.25(0.01") unless otherwise noted.
3.The gap between the reflector and PCB shall not exceed 0.25mm.
4.Specifications are subject to change without notice.
Absolute Maximum Ratings
(TA=25°C)
MYK
(InGaAIP)
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
30
mA
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
iFS
175
mA
Power Dissipation
PT
75
Operating Temperature
TA
-40 ~ +85
Tstg
-40 ~ +85
Storage Temperature
Part
Number
ZFMYK05C2
Emitting
Color
Yellow
Published Date : FEB 28,2008
mW
Emitting
Material
InGaAlP
°C
Forward Voltage (Typ.)
(IF=10mA)
VF
1.95
V
Forward Voltage (Max.)
(IF=10mA)
VF
2.5
V
Reverse Current (Max.)
(VR=5V)
IR
10
uA
Wavelength of Peak
Emission (Typ.)
(IF=10mA)
λP
590
nm
Wavelength of Dominant
Emission (Typ.)
(IF=10mA)
λD
590
nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=10mA)
Δλ
20
nm
Capacitance (Typ.)
(VF=0V, f=1MHz)
C
20
pF
Luminous
Intensity
(IF=10mA)
ucd
min.
typ.
8000
33990
Drawing No :SDSA5305
MYK
Unit
(InGaAlP)
Wavelength
nm
λP
590
V4
Description
Common Cathode.Rt.Hand Decimal
Checked : Shin Chi
P.1/4
Part Number:
www.SunLED.com
ZFMYK05C2
SURFACE MOUNT DISPLAY
™ MYK
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity / Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Published Date : FEB 28,2008
Drawing No :SDSA5305
V4
Checked : Shin Chi
P.2/4
Part Number:
www.SunLED.com
ZFMYK05C2
SURFACE MOUNT DISPLAY
™ Recommended Soldering Pattern (Units : mm;Tolerance:± 0.15)
™ Tape Specification (Units : mm)
Published Date : FEB 28,2008
Drawing No :SDSA5305
V4
Checked : Shin Chi
P.3/4
Part Number:
www.SunLED.com
SURFACE MOUNT DISPLAY
PACKING & LABEL SPECIFICATIONS
Published Date : FEB 28,2008
ZFMYK05C2
Drawing No :SDSA5305
ZFMYK05C2
V4
Checked : Shin Chi
P.4/4