Part Number: ZFUR07A SURFACE MOUNT DISPLAY www.SunLED.com Features ● 0.3 INCH DIGIT HEIGHT. ● LOW CURRENT OPERATION. ● EXCELLENT CHARACTER APPEARANCE. ● I.C. COMPATIBLE. ● MECHANICALLY RUGGED. ● GRAY FACE,WHITE SEGMENT. ● PACKAGE : 550PCS / REEL. ● MOISTURE SENSITIVITY LEVEL : LEVEL 4. ● RoHS COMPLIANT. Operating Characteristics (TA=25°C) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.The gap between the reflector and PCB shall not exceed 0.25mm. 4. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) UR (GaAsP/GaP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 160 mA Power Dissipation PT 75 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Part Number ZFUR07A Emitting Color Red Published Date : MAR 01,2008 Emitting Material GaAsP/GaP °C Unit Forward Voltage (Typ.) (IF=10mA) VF 1.9 V Forward Voltage (Max.) (IF=10mA) VF 2.5 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength Of Peak Emission (Typ.) (IF=10mA) λP 627 nm Wavelength Of Dominant Emission (Typ.) (IF=10mA) λD 625 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 45 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 15 pF Luminous Intensity (IF=10mA) ucd min. typ. 1200 4200 Drawing No : SDSA5113 UR (GaAsP/GaP) Wavelength nm λP Description 627 Common Anode. Rt. Hand Decimal V5 Checked : Shin Chi P.1/4 Part Number: ZFUR07A SURFACE MOUNT DISPLAY www.SunLED.com UR Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 01,2008 Drawing No : SDSA5113 V5 Checked : Shin Chi P.2/4 Part Number: ZFUR07A SURFACE MOUNT DISPLAY www.SunLED.com Recommended Soldering Pattern (Units : mm;Tolerance:± 0.15) Tape Specification (Units : mm) Published Date : MAR 01,2008 Drawing No : SDSA5113 V5 Checked : Shin Chi P.3/4 Part Number: SURFACE MOUNT DISPLAY www.SunLED.com PACKING & LABEL SPECIFICATIONS Published Date : MAR 01,2008 ZFUR07A ZFUR07A Drawing No : SDSA5113 V5 Checked : Shin Chi P.4/4