TRIQUINT 856080

Part Number 856080
1960 MHz SAW Filter
Data Sheet
Features
•
•
•
•
•
•
•
•
•
For PCS applications
Usable bandwidth 60 MHz
Low loss
High attenuation at Tx band
No impedance matching required for operation
at 50 Ω
Single-ended operation
Ceramic Surface Mount Package (SMP)
Small size
Package
Pin Configuration
Surface Mount 2.00 x 2.00 x 0.76 mm
Bottom View
1
2
4
3
0.76 NOM.
0.84 MAX.
2.00
1.30
2.00
0.25x45°
CHAMFER
1.30
0.58
Pin No.
1
3
2,4
Description
Input
Output
Case ground
0.58
Dimensions shown are nominal in millimeters
All tolerances are ±0.10mm
Body: Al2O3 ceramic
Lid: Kovar or Alloy 42, Au over Ni plated
Terminations: Au plating 0.5 - 1.0µm,
over a 2 - 6µm Ni plating
Subject to change or obsolescence without notice
Rev D
05-Sep-2002
Page 1 of 7
Part Number 856080
1960 MHz SAW Filter
Data Sheet
Electrical Specifications (1)
Operating Temperature: (2)
+25 oC
Parameter (3)
Minimum
Typical
Maximum
Unit
-
1960
-
MHz
-
2.5
3.5
dB
-
1.0
1.8
dB p-p
17
20
20
15
21
17
20
25
25
25
27
22
-
dB
dB
dB
dB
dB
dB
7.0
-
8.5
50
50
-
dB
Ω
Ω
Center Frequency
Insertion Loss
1930 - 1990 MHz
Amplitude Ripple
1930 - 1990 MHz
Absolute Attenuation
10 - 1600 MHz
1600 - 1850 MHz
1850 - 1910 MHz
2030 - 2070 MHz
2070 - 2800 MHz
3000 - 6000 MHz
Input/Output Return Loss
1930 - 1990 MHz
Source Impedance (4)
Load Impedance (4)
Notes:
1.
2.
3.
4.
All specifications are based on the test circuit shown below
In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over
temperature
Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances
This is the optimum impedance in order to achieve the performance shown
Test Circuit:
1
50 Ω
Single-ended
Subject to change or obsolescence without notice
50Ω
3
2,4
50Ω
Rev D
No impedance matching
required
05-Sep-2002
Page 2 of 7
Part Number 856080
1960 MHz SAW Filter
Data Sheet
Electrical Specifications (1)
Operating Temperature Range: (2)
-30 to +80 oC
Parameter (3)
Minimum
Typical
Maximum
Unit
-
1960
-
MHz
-
2.9
4
dB
-
1.0
1.8
dB p-p
17
20
12
15
21
17
20
25
25
25
27
22
-
dB
dB
dB
dB
dB
dB
7
-
8.5
50
50
-
dB
Ω
Ω
Center Frequency
Insertion Loss
1930 - 1990 MHz
Amplitude Ripple
1930 - 1990 MHz
Absolute Attenuation
10 - 1600 MHz
1600 - 1850 MHz
1850 - 1910 MHz
2030 - 2070 MHz
2070 - 2800 MHz
3000 - 6000 MHz
Input/Output Return Loss
1930 - 1990 MHz
Source Impedance (4)
Load Impedance (4)
Notes:
1.
2.
3.
4.
All specifications are based on the test circuit shown below
In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over
temperature
Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances
This is the optimum impedance in order to achieve the performance shown
Test Circuit:
1
50 Ω
Single-ended
Subject to change or obsolescence without notice
50Ω
3
2,4
50Ω
Rev D
No impedance matching
required
05-Sep-2002
Page 3 of 7
Part Number 856080
1960 MHz SAW Filter
Data Sheet
Electrical Specifications (1)
Operating Temperature Range: (2)
-30 to +85 oC
Parameter (3)
Center Frequency
Insertion Loss
1930 - 1931.5 MHz
1930 - 1931.5 MHz
1931.5 - 1990 MHz
Amplitude Ripple
1930 - 1990 MHz
Absolute Attenuation
10 - 1600 MHz
1600 - 1850 MHz
1850 - 1910 MHz
1850 - 1910 MHz
2030 - 2070 MHz
2070 - 2800 MHz
3000 - 6000 MHz
Input/Output Return Loss
1930 - 1990 MHz
Source Impedance (4)
Load Impedance (4)
Minimum
Typical
Maximum
Unit
-
1960
-
MHz
-
2.9
2.9
2.9
4.25
4.50
3.50
dB
dB
dB
-
1.0
1.8
dB p-p
17
20
17
15
15
21
17
20
25
25
25
25
27
22
-
dB
dB
dB
dB
dB
dB
dB
7
-
8.5
50
50
-
dB
Ω
Ω
(-30 to +45 oC)
(-30 to +60 oC)
(-30 to +45 oC)
(-30 to +60 oC)
Notes:
1.
2.
3.
4.
All specifications are based on the test circuit shown below
In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over
temperature
Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances
This is the optimum impedance in order to achieve the performance shown
Test Circuit:
1
50 Ω
Single-ended
Subject to change or obsolescence without notice
50Ω
3
2,4
50Ω
Rev D
No impedance matching
required
05-Sep-2002
Page 4 of 7
Part Number 856080
1960 MHz SAW Filter
Data Sheet
Typical Performance (at +25oC)
Subject to change or obsolescence without notice
Rev D
05-Sep-2002
Page 5 of 7
Part Number 856080
1960 MHz SAW Filter
Data Sheet
Matching Schematics
1
50 Ω
Single-ended
50Ω
3
2,4
Marking
PCB Footprint
.51
Marking
code
Sawtek
logo
No impedance matching
required
50Ω
D
2.08 SQ
JJJYM
.31x45°
CHAMFER
ID dot
Date code
.78 SQ
The date code consists of: JJJ = Julian day,
Y = last digit of year, M = manufacturing site code
This footprint represents a recommendation only
Dimensions shown are nominal in millimeters
Tape and Reel
2.7
8.5
Ø330
ID dot
Sawtek
logo
4.0
0.254
2.0
Ø1.5
A
1.75
3.5
2.23
Ø102
Ø20.2
Ø13.0
Direction of travel
2.0
1.1
Section A-A
2.23
4.0
Ø1.0
8.0
A
Dimensions shown are nominal in millimeters
Packaging quantity: 10000 units/reel
Subject to change or obsolescence without notice
Rev D
05-Sep-2002
Page 6 of 7
Part Number 856080
1960 MHz SAW Filter
Data Sheet
Maximum Ratings
Parameter
Operating Temperature Range
Storage Temperature Range
Symbol
Minimum
Maximum
T
Tstg
-30
-40
+80
+85
Unit
o
C
C
o
Warnings
•
•
Electrostatic Sensitive Device (ESD)
Avoid ultrasonic exposure
Links to Additional Technical Information
PCB Layout Tips
Qualification Flowchart
Soldering Profile
S-Parameters
Other Technical Information
Sawtek’s liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. Sawtek does not accept any liability for
applications, processes, circuits or assemblies which are implemented using any Sawtek component described in this data sheet.
Contact Information
PO Box 609501
Orlando, FL 32860-9501
USA
Subject to change or obsolescence without notice
Or contact one of our worldwide
Network of sales offices,
Representatives or distributors
Phone: +1 (407) 886-8860
Fax: +1 (407) 886-7061
Email: [email protected]
Web: www.sawtek.com
Rev D
05-Sep-2002
Page 7 of 7