SDZ5V6AWA Semiconductor ESD Protection Diode Features • • • • Transient protection for data lines to IEC 61000-4-2(ESD) 15KV(air), 8KV(contact) Small package for use in portable electronics Protection one I/O or power line. Low leakage current Applications • ESD Protection Ordering Information Type NO. Marking SDZ5V6AWA Package Code Z3E SOT-23 Outline Dimensions unit : mm 2.20~2.60 1.20~1.40 2.80~3.00 1.90 Typ. 1 3 2 0.43 Max. 3 KSD-D5C010-001 0.19 Max. 0.20 Min. 0.10 0.90~1.02 1 2 PIN Connections 1. Cathode 2. Cathode 3. Anode 1 SDZ5V6AWA Absolute Maximum Ratings Characteristic (Ta=25°C) Symbol Rating Unit Peak Pulse Power ( tp = 8/20 ㎲ ) PPK 100 W Power dissipation PD 200 mW Junction temperature Tj 150 °C Storage temperature range Tstg -55 ~ +150 °C Operating temperature range Topr -55 ~ +150 °C Electrical Characteristics Characteristic (Ta=25°C) Symbol Test Condition Min. Typ. Max. Unit Zener voltage VZ IZ=5mA 5.31 - 5.92 V Dynamic impedance ZZT IZ=5mA - - 60 Ω KNEE dynamic impedance ZZK IZ=0.5mA - - 200 Ω Reverse current IR VR=2.5V - - 1 ㎂ Total capacitance CT VR=0V, f=1MHz - 30 - pF ※ Recommend PCB solder land (Unit : mm) KSD-D5C010-001 2 SDZ5V6AWA Electrical Characteristic Curves Fig. 2 IZ-VZ Fig. 1 PD-Ta The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-D5C010-001 3