Part Number: www.SunLED.com DUY25A-1 26mm (1.02 ") SINGLE DIGIT NUMERIC DISPLAY Features ● 1.02 INCH DIGIT HEIGHT. ●LOW CURRENT OPERATION. ●EXCELLENT CHARACTER APPEARANCE. ●HIGH LIGHT OUTPUT. ●EASY MOUNTING ON P.C. BOARDS OR SOCKETS. ●I.C. COMPATIBLE. ●MECHANICALLY RUGGED. ●STANARD : GRAY FACE, WHITE SEGMENT. zRoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) UY (GaAsP/GaP) Unit Reverse Voltage Per Segment or (DP) VR 10(5) V Forward Current Per Segment or (DP) IF 30(30) mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Per Segment or (DP) iFS Power Dissipation Per Segment or (DP) PT 150(75) Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Lead Solder Temperature [2mm Below Package Base] Published Date : MAR 14,2008 140(140) mA mW °C 260°C For 3~5 Seconds Drawing No : SDSA2142 Operating Characteristics (TA=25°C) UY Unit (GaAsP/GaP) Forward Voltage (Typ.) Per Segment Or ( DP) (IF=10mA) VF 3.9(1.95) V Forward Voltage (Max.) Per Segment Or ( DP) (IF=10mA) VF 5.0(2.5) V Reverse Current (Max.) Per Segment Or (DP) (VR=10(5)V) IR 10 (10) uA Wavelength Of Peak Emission (Typ.) (IF=10mA) λP 590 nm Wavelength Of Dominant Emission (Typ.) (IF=10mA) λD 588 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 35 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 20 pF V3 Checked : Shin Chi P.1/5 Part Number: www.SunLED.com DUY25A-1 26mm (1.02 ") SINGLE DIGIT NUMERIC DISPLAY Part Number DUY25A-1 Emitting Color Yellow Emitting Material GaAsP/GaP Luminous Intensity (IF=10mA) ucd min. typ. 3000 15990 Wavelength nm λP Description 590 Common Anode, Rt. Hand Decimal UY Published Date : MAR 14,2008 Drawing No : SDSA2142 V3 Checked : Shin Chi P.2/5 Part Number: www.SunLED.com DUY25A-1 26mm (1.02 ") SINGLE DIGIT NUMERIC DISPLAY Published Date : MAR 14,2008 Drawing No : SDSA2142 V3 Checked : Shin Chi P.3/5 Part Number: www.SunLED.com DUY25A-1 26mm (1.02 ") SINGLE DIGIT NUMERIC DISPLAY Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 14,2008 Drawing No : SDSA2142 V3 Checked : Shin Chi P.4/5 Part Number: www.SunLED.com DUY25A-1 26mm (1.02 ") SINGLE DIGIT NUMERIC DISPLAY PACKING & LABEL SPECIFICATIONS Published Date : MAR 14,2008 Drawing No : SDSA2142 DUY25A-1 V3 Checked : Shin Chi P.5/5