Part Number: www.SunLED.com DUR57A 56.9mm (2.3”) SINGLE DIGIT NUMERIC DISPLAY Features z 2.3 INCH DIGIT HEIGHT. z LOW CURRENT OPERATION. z EXCELLENT CHARACTER APPEARANCE. z HIGH LIGHT OUTPUT. z EASY MOUNTING ON P.C.BOARDS OR SOCKETS. z MULTICOLOR AVAILABLE. z MECHANICALLY RUGGED. zSTANDARD : GRAY FACE, WHITE SEGMENT. zRoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. Operating Characteristics (TA=25°C) 3.Specifications are subject to change without notice. UR (GaAsP/GaP) Unit VF 7.6(3.8) V VF 10.0(5.0) V IR 10 uA Wavelength Of Peak Emission (Typ.) (IF=10mA) λP 627 nm Wavelength Of Dominant Emission (Typ.) (IF=10mA) λD 625 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 45 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 15 pF Forward Voltage (Typ.) Absolute Maximum Ratings (TA=25°C) Reverse Voltage Per Segment Or ( DP) Forward Current Per Segment Or ( DP) Per Segment Or ( DP) UR (GaAsP/GaP) Unit VR 20(10) V IF 30(30) mA (IF=10mA) Forward Voltage (Max.) Per Segment Or ( DP) (IF=10mA) Reverse Current Per Segment Or (Dp) (VR=20(10)V) Forward Current (peak) Per Segment Or ( DP) 1/10Duty Cycle 0.1ms Pulse Width Power Dissipation Per Segment Or ( DP) Operating Temperature Storage Temperature Lead Solder Temperature [2mm Below Package Base] Part Number DUR57A iFS 160 mA PT 300(150) mW TA -40 ~ +85 Tstg -40 ~ +85 °C 260°C For 3~ 5 Seconds Emitting Color Red Published Date : MAR 04, 2008 Emitting Material GaAsP/GaP Luminous Intensity (IF=10mA) ucd min. typ. 12000 55490 Drawing No : SDSA2162 Wavelength nm λP Description 627 Common Anode, Rt. Hand Decimal V4 Checked : Shin Chi P.1/5 Part Number: www.SunLED.com DUR57A 56.9mm (2.3”) SINGLE DIGIT NUMERIC DISPLAY UR Published Date : MAR 04, 2008 Drawing No : SDSA2162 V4 Checked : Shin Chi P.2/5 Part Number: www.SunLED.com Published Date : MAR 04, 2008 DUR57A 56.9mm (2.3”) SINGLE DIGIT NUMERIC DISPLAY Drawing No : SDSA2162 V4 Checked : Shin Chi P.3/5 Part Number: www.SunLED.com DUR57A 56.9mm (2.3”) SINGLE DIGIT NUMERIC DISPLAY Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 04, 2008 Drawing No : SDSA2162 V4 Checked : Shin Chi P.4/5 Part Number: www.SunLED.com 56.9mm (2.3”) SINGLE DIGIT NUMERIC DISPLAY PACKING & LABEL SPECIFICATIONS Published Date : MAR 04, 2008 DUR57A Drawing No : SDSA2162 DUR57A V4 Checked : Shin Chi P.5/5