Pb Free *Customer: SPECIFICATION ITEM MODEL REVISION DATE CHIP LED DEVICE BW104-S Rev1.0(070102) [Contents] 1. Features 2. Absolute maximum ratings 3. Electro-optical characteristics 4. Soldering profile 5. Outline dimension 6. Reel packing structure 7. Packing 8. Precaution for use 9. Label 10. Rank Customer Approved by Approved by Approved by Supplier Drawn by SSC-QP-0401-06(REV.0) Checked by Approved by SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 1/9 - W104-S Seoul SSC-B Semiconductor 1. Features Package : 1.6 × 0.8 × 0.4 mm Color coordinates: X = 0. 21 Y = 0.16 according to CIE 1931 Tape and reel packing 2. Absolute maximum ratings (Ta=25℃) Parameter Symbol Value Unit Power Dissipation Pd 99 ㎽ Forward Current IF 30 ㎃ Peak Forward Current IFM*1 100 ㎃ Reverse Voltage VR 5 V Operating Temperature Topr -30 ~ 80 ℃ Storage Temperature Tstg -40 ~ 100 ℃ *1 IFM conditions: Pulse width Tw≤ 0.1ms, Duty ratio≤ 1/10 3. Electro-optical characteristics Characteristics (Ta=25℃) Symbol Condition Min Typ Max Unit Forward Voltage VF IF=5㎃ 2.7 2.9 3.1 V Reverse Current IR VR=5V - - 10 ㎂ Luminous Intensity *2 IV IF=5㎃ 25 45 81 mcd X IF=5㎃ 0.165 0.210 0.260 Y IF=5㎃ 0.115 0.160 0.205 Δ 1/2θ IF=5㎃ - Y =±80 - Chromaticity Coordinates *3 Viewing Angle : Y Direction ˚ *2 The luminous intensity IV is measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. *3 The CIE standard colorimetric system SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 2/9 - SSC-BW104-S [Note] ( Tolerance : IV±10%, color coordinate ±0.01, VF ±0.1 ) 4. Soldering profile Reflow Soldering Conditions/ Profile (1) Lead Solder -Preliminary heating to be at 150℃max. for 2 minutes max. -Soldering heat to be at 240℃max. for 5 seconds max. LED Surface temperature °C Operation heating 240 150 Pre-heating Temperature rise: 5°C/sec. Cooling: -5°C/sec. ~ 120 0 60 to 120 sec. 5sec. max (2) Lead-Free Solder -Preliminary heating to be at 150℃max. for 2 minutes max. -Soldering heat to be at 260℃max. for 10 seconds max. LED Surface temperature °C Operation heating 260 150 Pre-heating Temperature rise: 5°C/sec. Cooling: -5°C/sec. ~ 120 0 60 to 120 sec. (3) Hand Solder SSC-QP-0401-06(REV.0) 5 to 10 sec. SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 3/9 - SSC-BW104-S -Not more than 3 seconds @MAX280℃, under Soldering iron. 5. Outline dimension Tolerance: ±0.1, 0.3 0.18 Polarity Mark 0.8 1.1 1.2 2.4 Cathode Resin 1.6 Unit: ㎜ PCB 0.4 ±0.05 Anode 0.3 0.8 0.8 [Recommended Solder Pattern] 6. Reel packing structure ±0.1 0.95 ±0.05 ±0.2 8.0 ±0.05 3.5 1.85 0.5 ±0.08 4.0 ±0.1 ±0.05 0.2 1.75 2.0 ±0.05 +0.1 -0 ±0.05 1.5 ±0.1 0.5 (2.75) 4.0 ±0.05 11.4 180 +0 -3 9 ±0.3 60 +0.2 -0 2 ±0.2 22 13 ±0.2 Label Tolerance ±0.2, Unit : mm (1) Quantity : 4000pcs/Reel (2) Cumulative Tolerance : Cumulative Tolerance/10 pitches to be ±0.2mm (3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at 10℃ angle to be the carrier tape SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 4/9 - SSC-BW104-S (4) Package : P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package. 7. Packing SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 5/9 - SSC-BW104-S Reel # # # # # # # # # # : N / P ### 제품명 SSC-BW104-S # # # # # # # # # o N t o L 수량 : 4000 Aluminum Vinyl Bag # # # # # # # # # # : N / P ### 제품명 SSC-BW104-S # # # # # # # # # o N t o L 수량 : 4000 Outer Box *Material: Paper(SW3B(B)) TYPE SIZE(mm) a 7inch 245 b 220 c 142 c CHIP LED S 4 0 1 W B C S S : : E D O C T R A P b D T L , . O C R O T C U D N O C I M E S L U O E S a A E 0 0 0 , 0 4 : : : O N E T T T Y O A ' Q L D CHIP LED 8. Precaution for use SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 6/9 - SSC-BW104-S (1) Storage In order to avoid the absorption of moisture, it is recommended to store in the dry box (or desiccator) with a desiccant . Otherwise, to store them in the following environment is recommended. Temperature : 5℃~30℃ Humidity : 60%HR max. (2) Attention after opened However LED is correspond SMD, when LED be reflowed, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed. a. After opened and mounted, the soldering shall be quickly. b. Keeping of a fraction Temperature : 5 ~ 40℃ Humidity : less than 30% (3) In case of more than 1 week passed after opening or change color of indicator on desiccant components shall be dried 10-12hr. at 60±5℃. (4) In case of supposed the components is humid, shall be dried dip-solder just before. 100Hr at 80±5℃ or 12Hr at 100±5℃. (5) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. (6) Quick cooling shall not be avoid. (7) Components shall not be mounted on warped direction of PCB. (8) Anti radioactive ray design is not considered for the products listed here in. (9) This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA should be used. (10) When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. (11) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. (12) The LEDs must be soldered within seven days after opening the moisture-proof packing. (13) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (14) The appearance and specifications of the product may be modified for improvement without notice. 9. Label SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 7/9 - SSC-BW104-S ### P/N : ########## 제품명 SSC-BW104-S Lot No CAA050704#######-## 수량 : 4000 Rank Day Month Year 10. Rank SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 8/9 - SSC-BW104-S 1) Luminous Intensity : Iv [mcd] Rank Iv [mcd] A 25~45 B 45~81 Condition IF =5mA 2) Color Coordinate : x, y R Rank 0.167 0.115 x y 0.184 0.145 Condition 0.219 0.145 0.202 0.115 S Rank 0.184 0.145 x y 0.202 0.175 Condition 0.237 0.175 0.219 0.145 T Rank 0.202 0.175 x y 0.221 0.205 IF=5mA IF=5mA Condition 0.256 0.205 0.237 0.175 IF=5mA 3) Voltage : VF[V] Rank VF (V) Condition A 2.7 2.8 B 2.8 2.9 C 2.9 3.0 D 3.0 3.1 IF = 5mA ♦ Rank Division SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 9/9 - SSC-BW104-S Iv [mcd] (IF=5 mA) Color coordinate (IF=5 mA) VF [V] (IF=5 mA) Rank A R A ARA A R B ARB A R C ARC A R D ARD A S A ASA A S B ASB A S C ASC A S D ASD A T A ATA A T B ATB A T C ATC A T D ATD B R A BRA B R B BRB B R C BRC B R D BRD B S A BSA B S B BSB B S C BSC B S D BSD B T A BTA B T B BTB B T C BTC B T D BTD SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 10/9 - SSC-BW104-S