Pb Free *Customer: SPECIFICATION ITEM MODEL REVISION DATE CHIP LED DEVICE FCW320G Rev0.4(061127) [Contents] 1. Features 2. Absolute maximum ratings 3. Electro-optical characteristics 4. Characteristic Diagrams 5. Soldering profile 6. Outline dimension 7. Packing 8. Reel packing structure 9. Label 10. Precaution for use 11. Ranks Supplier SSC-QP-0401-06(REV.0) Drawn by Checked by Approved by 11/27 11/27 11/27 SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 1/10 - FCW320G Seoul Semiconductor 1. Features Package : 3.5 × 2.8 × 0.6 mm Color coordinates: according to CIE 1931 Tape and reel packing 2. Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Value Unit Power Dissipation Pd 306 ㎽ Forward Current IF 90 ㎃ Peak Forward Current IFM*1 250 ㎃ Reverse Voltage VR 5 V Operating Temperature Topr -30 ~ 80 ℃ Storage Temperature Tstg -40 ~ 100 ℃ *1 IFM conditions: Pulse width Tw≤ 300ms, Duty ratio≤ 1/10 3. Electro-Optical Characteristics Characteristics (Ta=25℃) Symbol Condition Min Typ Max Unit Forward Voltage VF IF=90㎃ 3.0 3.4 4.0 V Reverse Current IR VR=5V - - 30 ㎂ IF=60㎃ - 4800 - IF=90㎃ 4500 7000 - IF=250㎃ (Flash mode) *3 - 16000 - X IF=90㎃ 0.247 0.300 0.340 Y IF=90㎃ 0.260 0.300 0.340 Δ 1/2θ IF=90㎃ - X = 120 Y = 120 - Luminous Intensity *2 IV Chromaticity Coordinates *4 Viewing Angle : X, Y Direction mcd ˚ *2 The luminous intensity IV is measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. *3 Flash mode condition is Pulse width Tw≤ 300ms, Duty ratio≤ 1/10 *4 The CIE standard colorimetric system SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 2/10 - FCW320G [Note] ( Tolerance : IV±10%, color coordinate ±0.01, VF ±0.1 ) SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 3/10 - FCW320G 4. Characteristic Diagrams Forward Current vs Forward Voltage Relative Intensity vs Forward Current 2.0 Relative Luminosity [a.u.] 1.8 Forward Current [mA] 100 10 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 1 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4 4.6 4.8 0 20 40 60 80 100 120 140 160 180 200 220 240 Foward Current [mA] Forward Voltage [V] Allowable Forward Current vs ambient Temperature Forward Current vs Chromaticity Coordinate 100 0.35 X Y Chromaticity Coordinate [X, Y] Forward Current [mA] 80 60 40 20 0 -20 0 20 40 60 80 100 0.34 0.33 0.32 0.31 0 20 40 o SSC-QP-0401-06(REV.0) 60 80 100 120 140 160 180 200 220 240 Forward Current [mA] Temperature [ C] SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 4/10 - FCW320G Radiation Diagram 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 120 110 100 90 80 70 60 130 50 140 40 30 150 160 20 170 10 180 0 Spectrum o Ta = 25 C 1.0 Intensity [a.u.] 0.8 0.6 0.4 0.2 0.0 400 450 500 550 600 650 700 750 Wavelength [nm] SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 5/10 - FCW320G 5. Soldering Profile Reflow Soldering Conditions/ Profile (1) Lead Solder -Preliminary heating to be at 150℃max. for 2 minutes max. -Soldering heat to be at 240℃max. for 5 seconds max. LED Surface temperature °C Operation heating 240 150 Pre-heating Temperature rise: 5°C/sec. Cooling: -5°C/sec. ~ 120 0 60 to 120 sec. 5sec. max (2) Lead-Free Solder -Preliminary heating to be at 150℃max. for 2 minutes max. -Soldering heat to be at 260℃max. for 10 seconds max. LED Surface temperature °C Operation heating 260 150 Pre-heating Temperature rise: 5°C/sec. Cooling: -5°C/sec. ~ 120 0 60 to 120 sec. 5 to 10 sec. (3) Hand Soldering conditions -Not more than 3 seconds @MAX280℃, under Soldering iron. SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 6/10 - FCW320G 6. Outline Dimension Tolerance: ±0.1, Unit: ㎜ Marking [TOP VIEW] [SIDE VIEW] [BOTTOM VIEW] [INNER CIRCUIT] * Recommend solder pad pattern SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 7/10 - FCW320G 7. Packing MAX =5° 0.25±0.05 *R 3.7±0.1 (2.75) 3.5±0.05 2.0±0.05 8.0±0.1 +0.1 -0 1.75±0.1 4.0±0.1 1.5 1.5 4.0±0.1 *R ±0.1 0.85±0.1 180 11.4 +0 -3 9 ±0.2 60 +0.2 -0 2 ±0.3 22 13 ±0.2 Label Tolerance: ±0.2 [Unit:㎜] (1) Quantity : 2000pcs/Reel (2) Cumulative Tolerance : Cumulative Tolerance/10 pitches to be ±0.2mm (3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 8/10 - FCW320G from the carrier tape at 10℃ angle to be the carrier tape (4) Package : P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package. SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 9/10 - FCW320G 8. Reel packing structure Reel # # # # # # # # # # : N / P # 제품명 SSC-FCW320G # # # # # # # # # o N t o L 수량 : 2000 Aluminum Vinyl Bag # # # # # # # # # # : N / P # 제품명 SSC-FCW320G # # # # # # # # # o N t o L 수량 : 2000 Outer Box *Material: Paper(SW3B(B)) TYPE SIZE(mm) a 7inch 245 b 220 c 142 c CHIP LED G 0 2 3 W C F C S S : : E D O C T R A P b SSC-QP-0401-06(REV.0) D T L , . O C R O T C U D N O C I M E S L U O E S a A E 0 0 0 , 0 2 : : : O N E T T T Y O A ' Q L D CHIP LED SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 10/10 - FCW320G 9. Label # P/N : ########## 제품명 SSC-FCW320G Lot No CAA060810#######-## 수량 : 2000 Rank Day Month Year SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 11/10 - FCW320G 10. Precaution for use (1) Storage In order to avoid the absorption of moisture, it is recommended to store in the dry box (or desicator) with a desiccant . Otherwise, to store them in the following environment is recommended. Temperature : 5℃~30℃ Humidity : 60%HR max. (2) Attention after opened However LED is corresponded SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed. a. After opened and mounted, the soldering shall be quickly. Temperature : 5 ~ 40℃ b. Keeping of a fraction Humidity : less than 30% (3) In case of more than 1 week passed after opening or change color of indicator on desiccant components shall be dried 10-12hr. at 60±5℃. (4) In case of supposed the components is humid, shall be dried dip-solder just before. 100Hr at 80±5℃ or 12Hr at 100±5℃. (5) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. (6) Quick cooling shall not be avoid. (7) Components shall not be mounted on warped direction of PCB. (8) Anti radioactive ray design is not considered for the products listed here in. (9) This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA should be used. (10) When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. (11) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. (12) The LEDs must be soldered within seven days after opening the moisture-proof packing. (13) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (14) The appearance and specifications of the product may be modified for improvement without notice. (15) Static Electricity and surge damages the Blue LEDs. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be properly grounded. (16) It is recommended to use individual resistor separately when the LEDs applies in parallel circuit so that it may improve the light deviations. SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 - 12/10 - FCW320G