CCJ Series • Compact SMD Common Mode Chokes Features • Low cost, compact SMD for pick and place compatability while providing consistent and reliable coplanarity • High attenuation over a wide frequency range • Manufactured in ISO-9001 approved Talema facility • Other inductance values available upon request Electrical Specifications Ratings @ 25°C ambient Operating Temperature: 0 to 70°C Storage Temperature: -25° to +105°C Test voltage between windings: 500 Vrms Test frequency: Inductance measured @ 100kHz/20 mVrms C C J Series • C ompact D ouble and Quad C hokes for D ata and Signal Line EMI Suppression N umber of D ata Lines OC L (µH ±30% ) IN (mA) C C J-2-260 2 26 900 C C J-2-102 2 1000 550 C C J-2-152 2 1500 550 100 Part N umber DCR (mOhms Typ.) N umber of C oils Windings per C ore Schematic 55 1 2 A 140 1 2 A 1 2 A D ouble C hokes C C J-2-222 2 2200 550 115 1 2 A C C J-2-332 2 3300 550 140 1 2 A C C J-2-502 2 5000 500 180 1 2 A C C J-2-682 2 6800 450 200 1 2 A C C J-2-103 2 10000 400 250 1 2 A C C J-2-123 2 12000 400 270 1 2 A C C J-2-283 2 28000 270 520 1 2 A C C J-2-503 2 50000 200 970 1 2 A C C J-2-703 2 70000 170 1490 1 2 A C C J-4-260 4 26 600 65 1 4 B C C J-4-470 4 47 500 90 1 4 B C C J-4-101 4 100 400 130 1 4 B C C J-4-221 4 220 330 190 1 4 B B Quad C hokes • 4 w indings per core C C J-4-471 4 470 400 120 1 4 C C J-4-681 4 680 400 140 1 4 B C C J-4-102 4 1000 350 170 1 4 B B C C J-4-152 4 1500 350 120 1 4 C C J-4-222 4 2200 350 140 1 4 B C C J-4-332 4 3300 350 180 1 4 B C C J-4-502 4 5000 330 220 1 4 B C C J-4-103 4 10000 230 430 1 4 B C C J-4-123 4 12000 170 770 1 4 B C C J-4-583 4 58000 90 2350 1 4 B C C J-4-250C 4 25 650 110 2 2 C C C J-4-101C 4 100 450 220 2 2 C Quad C hokes • 2 cores w ith double w indings 0.551 0.472 (14.00) (12.00) Schematics Suggested Pad Layout TALEMA IN WK/YR Part Number 0.300 (7.62) 4 0.100 (2.54) 0.300 (7.62) 0.433 (11.00) 0° - 8° 0.354 0.315 (9.00) (8.00) 0.020 x 0.12 (0.50 x 0.30) A 1 0.590 (15.00) 0.102 (2.60) 0.047 (1.20) B 8 C 1 8 1 8 2 7 2 7 3 6 3 6 4 5 4 5 5 Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) Surface Coplanarity will be 0.004(0.10) maximum Germany: Int.+49 89 - 841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep.: Int.+420 37 - 744 9303 • India.+91 427 - 244 1325 http://www.talema-nuvotem.com 4