PTRH-T 30 AMP Panel Mount or PCB Power Relay FEATURES Panel or PC mount with QC terminals for the load Up to 30 amp switching capacity Up to 2 horsepower rating Gold flashed contacts available UL Class B insulation standard UL Class F insulation available UL 873 spacing standard Epoxy sealed, immersion cleanable File # E93379 Certificate # LR 109231 UL/CSA RATINGS 1 Form C (SPDT) Load Type Voltage 1 Form A (SPST-NO) 1 Form B (SPST-NC) NO NC General Purpose 120 VAC 250 VAC 30 VDC 30 A 30 A 30 A 20 A 20 A 20 A 30 A 30 A 30 A 20 A 20 A 20 A Resistive ( 100,000 cycles) 120 VAC 250 VAC 30 A 30 A 20 A 20 A 30 A 30 A 20 A 20 A Motor ( 30,000 cycles ) 250 VAC 120 VAC 2 HP 1 HP 2 HP 1 HP 250 VAC 120 VAC 80 A/30 A 96 A/30 A 80 A/30 A 96 A/30 A LRA/FLA (locked rotor amps/full load amps) CONTACT DATA Material AgCdO (Silver Cadmium Oxide), AgCdO+Au (Silver Cadmium Oxide with Gold flash) Initial Contact Resistance 50 milliohms max @ 0.1A, 6VDC Service Life Mechanical 1 X 10 7 Operations Electrical 1 X 10 5 Operations CHARACTERISTICS Operate Time 15 ms. typical Release Time 10 ms. typical Insulation Resistance 1,000 megohms min, at 500VDC, 50%RH Dielectric Strength 1500 Vrms, 1 min. between open contacts 1500 Vrms, 1 min. between coil and contacts Shock Resistance 10 g, 11ms, functional; 100 g, destructive Vibration Resistance DA 1.5mm, 10-55 Hz Power Consumption 0.9W, approx. Ambient Temperature Range -55 degrees C to 85 degrees C operating for class B, -40 to 130 degrees C storage Weight 30 grams approx. PTRH-T Rev D 3-25-04 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: Call Toll Free (888)997-3933 Fax (818) 342-5296 email: [email protected] URL: pickercomponents.com PAGE 1 PTRH-T PTRH-T ORDERING INFORMATION Example: PTRH -1C -12 S G F -T5 Model Contact Form 1A, 1B, or 1C Coil Voltage Configueration Nil: Open Frame; C: Dust Cover S: Sealed plastic case Contact Material T: AgSnO; Nil: AgCdO; G: AgCdO+Au Insulation Material Nil: UL Class B; F: UL Class F Mounting Type T2: Form 1A PCB & QC, T3: Form 1C PCB & QC, T4: 1A Panel all QC, T5: 1C Panel all QC COIL DATA Resistance Coil Voltage _ 10% ohms + Must Operate Voltage Max. Must Release Voltage Min. Continuous Voltage Max. (VDC) (VDC) (VDC) 5 27 3.75 0.5 5.5 6 40 4.50 0.6 6.6 9 97 6.75 0.9 9.9 12 155 9.00 1.2 13.2 24 660 18.00 2.4 26.4 48 2560 36.00 4.8 52.8 11.0 121.0 110 10330 82.50 Note: Custom coil voltages within the ranges shown are available on special order. Overall Dimensions Inches (millimeters) 1.27 (32.2) max Pin Layout 1.08 (27.5) max Bottom View Including Schematic .250 Ref. (6.35) 1.10 (28.0) max .440 (11.2) .300 (7.6) .600 (15.2) .500 (12.7) NO COM 1.71 (43.5) NC Notes: Breakable nib may be removed after flux removal. PC mount has .250 male QC terminals for load. Panel mount has .250 male QC terminals for the load and .187 male QC terminals for the coil. Tolerances + .010 unless otherwise noted Holes for load term. .081 + .005 Dia. (2.06 + .13) Holes for Coil term. .043 + .003 Dia. (1.09 + .08) .150 (3.81) .550 (13.97) .700 (17.78) 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: Call Toll Free (888) 997-3933 Fax (818) 342-5296 email: [email protected] URL: pickercomponents.com PAGE 2