Sanyo DL8032-001 Laser Diode Specifications The Sanyo DL8032-001 is a high-power laser diode with an optical output of 150mW and a typical operating wavelength of 830nm. The DL8032-001 has a ∅9mm package. 2 PD LD 3 1 Internal Circuit Absolute Maximum Ratings (Tc=25 °C) Characteristic Symbol Value Unit Po 150 mW Laser diode reverse voltage V R(LD) 2 V Photodiode reverse voltage V R(PD) 30 V Operating temperature Topr 10 to +50 °C Storage temperature Tstg 40 to +85 °C Optical output power 1 2 3 Ø9mm 2 1 3 Package Type: Ø9mm Operating and Electrical Characteristics (Tc=25 °C) Characteristic Symbol Min. Typ. Max. Unit Threshold current Ith 50 70 mA Operating current Iop 185 220 mA Po=150mW Operating voltage Vop 1.8 2.2 V Po=150mW Lasing Wavelength λp 815 830 840 nm Po=150mW Beam divergence (parallel) θ // 5 7 11 deg Po=150mW, (FWHM) Beam divergence (perpendicular) θ⊥ 12 18 25 deg Po=150mW, (FWHM) η 0.7 1.0 mW/mA Monitor current Im 0.15 0.5 2.0 mA Po=150mW Astigmatism As 10 microns Po=150mW Differential efficiency Test Condition Disclaimer: The laser diode information summarized above is based on the respective diode manufacturers commercial catalog and/or data sheet spec ifications. The data is presumed to be accurate; however, it is subject to change without notice. Optima makes no representation as to the accuracy of the informati on and does not assume any responsibility for errors or omissions contained herein. The user must refer to the manufacturers specifications for details concernin g the intended application and operation, diode limitations, and safety. For current pricing and stock availability please contact: Optima Precision Inc. 775 SW Long Farm Road West Linn, Oregon 97068 U.S.A. Phone: (503) 638-2525 Fax: (503) 638-4545 email: [email protected] Website: http://www.optima-optics.com Revised21AUG01