05178 ESOT3.3LCC LOW CAPACITANCE TVS ARRAY APPLICATIONS ✔ Ethernet - 10/100/1000 Base T ✔ USB Ports ✔ Cellular Phones ✔ Audio/Video Inputs ✔ Personal Digital Assistant (PDA) ✔ E1/T1 & E3/T3 IEC COMPATIBILITY (EN61000-4) SOT-23 ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns F E AT U R E S ✔ ✔ ✔ ✔ ✔ ✔ ESD Protection > 25 kilovolts Protects One Bidirectional Line Bidirectional Configuration Low Leakage Current < 2.0µA Low Capacitance: 15pF per Line RoHS Compliant MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SOT-23 Package ✔ Weight 8 milligrams (Approximate) ✔ Available in Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code PIN CONFIGURATION 1 3 2 05178.R2 2/07 1 www.protekdevices.com ESOT3.3LCC DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 50 Watts Peak Pulse Current (tp = 8/20µs) IPP 5 A Operating Temperature TA -55 to 150 °C TSTG -55 to 150 °C PARAMETER Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER (See Note 1) DEVICE MARKING CODE ESOT3.3LCC T3 @ 25°C Unless Otherwise Specified RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MINIMUM SNAP BACK VOLTAGE MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE V WM VOLTS @ 1mA V(BR) VOLTS @ ISB = 50mA V SB VOLTS @V WM ID µA @0V, 1 MHz C pF 3.3 3.6 3.3 2 15 Note 1: Bidirectional, test in both directions. Pin 3 is not connected. 50W 8/20µs Waveform 100 10 1 0.1 05178.R2 2/07 10 100 td - Pulse Duration - µs 1,000 10,000 2 tf 100 Peak Value IPP 80 e-t TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 60 40 td = t I /2 PP 20 0 1 FIGURE 2 PULSE WAVE FORM 120 IPP - Peak Pulse Current - % of IPP PPP - Peak Pulse Power - Watts 1,000 FIGURE 1 PEAK PULSE POWER VS PULSE TIME 0 5 10 15 20 t - Time - µs 25 30 www.protekdevices.com ESOT3.3LCC SOT-23 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SOT-23 A L 0º - 10º 3 B 1 S PACKAGE DIMENSIONS 2 K J MILLIMETERS MIN MAX DIM V A B C D G H J K L S V G C D H 2.80 1.20 0.89 0.37 1.78 0.013 0.085 0.45 0.89 2.10 0.45 3.04 1.40 1.11 0.50 2.04 0.100 0.177 0.60 1.02 2.50 0.60 INCHES MIN MAX 0.1102 0.0472 0.0350 0.0150 0.0701 0.0005 0.0034 0.0180 0.0350 0.0830 0.0177 0.1197 0.0551 0.0440 0.0200 0.0807 0.0040 0.0070 0.0236 0.0401 0.0984 0.0236 NOTES MOUNTING PAD 1. 2. 3. 4. 0.037” (0.95mm) Dimensioning and tolerances per ANSI Y14.5M, 1985. Controlling Dimension: Inches Pin 3 is the cathode (Unidirectional Only). Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., ESOT3.3LCC-T7. 3. Suffix-T13 = 13 Inch Reel - 10,000 pieces per 8mm tape, i.e., ESOT3.3LCC-T13. 4. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., ESOT3.3LCC-LF-T7. 0.079” (2.00mm) 0.033” (0.85mm) 0.033” (0.85mm) Outline & Dimensions: Rev 1 - 11/01, 06012 COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05178.R2 2/07 3 ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com www.protekdevices.com