05245 PLR0502 STEERING DIODE/TVS ARRAY COMBO APPLICATIONS ✔ Ethernet - 10/100 Base T ✔ FireWire ✔ Wireless Communications ✔ USB Interface IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-Gnd) & Level 3(Line-Line) SOT-543 FEATURES ✔ 200 Watts Peak Power per Line (tp = 8/20µs) ✔ ESD Protection > 25 kilovolts ✔ Low Clamping Voltage ✔ Unidirectional Configuration ✔ Protects 2 I/O Ports & Power Supply ✔ Ultra-Low Capacitance: 0.6pF ✔ RoHS Compliant MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SOT-543 ✔ Weight 3 milligrams (Approximate) ✔ Available in Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code PIN CONFIGURATION 05245.R1 2/07 GND 1 4 REF I/O 2 3 I/O 1 www.protekdevices.com PLR0502 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature Peak Forward Voltage - IF = 1A, 8/20µs SYMBOL VALUE UNITS PPP 200 Watts °C TL -55 to 150 TSTG -55 to 150 °C VF 1.5 Volts ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER DEVICE MARKING PLR0502 B5 RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE V WM VOLTS 5.0 @ 25°C Unless Otherwise Specified MAXIMUM CLAMPING VOLTAGE (See Fig. 2) (See Note 2) 8/20µs VC @ IPP VOLTS MAXIMUM LEAKAGE CURRENT @ 1mA V(BR) VOLTS MAXIMUM CLAMPING VOLTAGE (See Fig. 2) (See Note 2) @ IP = 1A VC VOLTS @ VWM ID µA MAXIMUM CAPACITANCE (See Note 1) (See Fig. 5) (Per Data Line) @0V, 1 MHz CJ(SD) pF 6.0 9.8 20.0V @ 10.0A 1.0 0.6 Note 1: As shown in Figure 5, REF 1 is connected to ground, REF 2 is connected to +VCC and input applies to VCC = 5V, Vsign = 30mV, F = 1MHz. Note 2: Measured across pin 1 to pin 4. FIGURE 1 PEAK PULSE POWER VS PULSE TIME 120 IPP - Peak Pulse Current - % of IPP PPP - Peak Pulse Current - Watts 10,000 1,000 200W, 8/20µs Waveform 100 10 0.01 05245.R1 2/07 FIGURE 2 PULSE WAVE FORM tf 100 Peak Value IPP 80 e-t TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 60 40 td = t I /2 PP 20 0 1 10 100 td - Pulse Duration - µs 1,000 10,000 2 0 5 10 15 20 t - Time - µs 25 30 www.protekdevices.com PLR0502 GRAPHS FIGURE 3 POWER DERATING CURVE 100 Peak Pulse Power 8/20µs % Of Rated Power 80 60 40 20 Average Power 0 0 25 50 75 100 125 TL - Lead Temperature - °C 150 FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE 5 Volts per Division 20 10 0 -10 -20 ESD Test Pulse: 5 kilovolt, 1/30ns (waveform) FIGURE 5 INPUT CAPACITANCE CIRCUIT REF2 I/O VSIGN +VCC G REF1 05245.R1 2/07 3 www.protekdevices.com PLR0502 SOT-543 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE A PACKAGE DIMENSIONS C R 4 K DIM 3 H B 1 1.50 1.10 0.50 0.17 0.50 BSC 1.50 0.08 0.10 0.05 A B C D G H J K R 2 INCHES MIN MAX MILLIMETERS MIN MAX 1.70 1.30 0.60 0.27 1.70 0.16 0.30 0.15 0.059 0.043 0.020 0.007 0.020 BSC 0.059 0.003 0.004 0.002 0.067 0.051 0.024 0.011 0.067 0.007 0.0120 0.006 NOTES D G Do not connect center stub. 1. 2. 3. 4. J MOUNTING PAD TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., PLR0502-T7. 3. Suffix - LF = Lead-Free Plating, i.e., PLR0502-LF-T7. 3 TYPICAL DIM Millimeters Inches 1 0.012 0.040 0.055 0.020 4 0.30 1.02 1.40 0.51 2 1 2 3 4 Dimensioning and tolerances per ANSI Y14.5M, 1985. Controlling Dimension: Inches Pin 3 is the cathode (Unidirectional Only). Dimensions are exclusive of mold flash and metal burrs. Outline & Dimensions: Rev 0 - 1/07, 06071 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P tmax 1.78 ± 0.05 1.78 ± 0.05 0.69 ± 0.05 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ±0.30 4.00 ±0.10 2.00 ±0.05 4.00 ±0.10 P0 t P2 D 0.25 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Pin 1 Indicated by Dot Top cover tape A0 F W K0 B0 P User Direction of Feed COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05245.R1 2/07 4 ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com www.protekdevices.com